Move files.

Makefile

@@ -1,59 +0,0 @@
-PROJECT_ELF=uart.elf
-PROJECT_MOT=$(PROJECT_ELF:.elf=.mot)
-PROJECT_MAP=$(PROJECT_ELF:.elf=.map)
-PROJECT_LST=$(PROJECT_ELF:.elf=.lst)
-
-# Find latest installed GNURL78 toolchain. If your toolchain is already in PATH, just comment next line.
-TOOL_PATH:=$(shell find /usr/share -maxdepth 1 -type d -iname "gnurl78*" | sort | tail -n 1)/bin
-
-PREFIX:=$(TOOL_PATH)/rl78-elf
-
-LD = $(PREFIX)-gcc
-CC = $(PREFIX)-gcc
-AS = $(PREFIX)-gcc
-OBJCOPY = $(PREFIX)-objcopy
-OBJDUMP = $(PREFIX)-objdump
-SIZE = $(PREFIX)-size
-
-COMMON_PATH = ../common
-PROJECT_PATH = .
-
-PROJECT_LNK = $(COMMON_PATH)/rl78-R5F100SL.ld
-
-CFLAGS = -Wall -Wextra -Os -ggdb -ffunction-sections -fdata-sections -I$(PROJECT_PATH) -I$(COMMON_PATH) -mmul=g13
-LDFLAGS = -Wl,--gc-sections -Wl,-Map=$(PROJECT_MAP) -T $(PROJECT_LNK) -nostartfiles
-
-SOURCES = \
-	$(PROJECT_PATH)/main.c \
-	$(PROJECT_PATH)/uart0.c \
-	$(END)
-
-OBJS	= $(SOURCES:.c=.o) $(COMMON_PATH)/crt0.o
-
-.PHONY: all
-
-all: $(PROJECT_MOT) $(PROJECT_LST)
-	$(SIZE) $(PROJECT_ELF)
-
-rom: $(PROJECT_MOT)
-
-$(PROJECT_MOT): $(PROJECT_ELF)
-	$(OBJCOPY) -O srec $^ $@
-
-$(PROJECT_LST): $(PROJECT_ELF)
-	$(OBJDUMP) -DS $^ > $@
-
-$(PROJECT_ELF): $(OBJS)
-	$(LD) $(LDFLAGS) -o $@ $^
-
-flash: $(PROJECT_MOT)
-	rl78flash -m2 -b500000 -vvwri /dev/ttyUSB0 $^
-
-erase:
-	rl78flash -m2 -b500000 -vveri /dev/ttyUSB0
-
-terminal:
-	rl78flash -rt9600 /dev/ttyUSB0
-
-clean:
-	-rm -f $(OBJS) $(PROJECT_ELF) $(PROJECT_MOT) $(PROJECT_MAP) $(PROJECT_LST)

main.c

@@ -1,60 +0,0 @@
-#include "QB-R5F100SL-TB.h"
-#include "uart0.h"
-
-volatile unsigned char ticks = 0;
-volatile unsigned char flag_1hz = 0;
-
-__attribute__((interrupt))
-void
-wdti_handler(void)
-{
-}
-__attribute__((interrupt))
-void
-it_handler(void)
-{
-  ++ticks;
-  LED1 ^= 1;
-  if(0 == (0x07 & ticks)) {
-    flag_1hz = 1;
-  }
-}
-int
-main(void)
-{
-  asm ("di");
-  /* Setup LEDs */
-  LED1 = 1;
-  LED2 = 1;
-  LED1_PIN = 0;
-  LED2_PIN = 0;
-  /* Setup clocks */
-  CMC.cmc = 0x11U;                                          /* Enable XT1, disable X1 */
-  CSC.csc = 0x80U;                                          /* Start XT1 and HOCO, stop X1 */
-  CKC.ckc = 0x00U;
-  /* Delay 1 second */
-  register unsigned long int i;
-  for(i = 0x000FFFFFUL; i; --i) {
-    asm ("nop");
-  }
-  OSMC.osmc = 0x00;                                         /* Supply fsub to peripherals, including Interval Timer */
-  uart0_init();
-  /* Setup 12-bit interval timer */
-  RTCEN = 1;                                                /* Enable 12-bit interval timer and RTC */
-  ITMK = 1;                                                 /* Disable IT interrupt */
-  ITPR0 = 0;                                                /* Set interrupt priority - highest */
-  ITPR1 = 0;
-  ITMC.itmc = 0x8FFFU;                                      /* Set maximum period 4096/32768Hz = 1/8 s, and start timer */
-  ITIF = 0;                                                 /* Clear interrupt request flag */
-  ITMK = 0;                                                 /* Enable IT interrupt */
-  asm ("ei");                                               /* Enable interrupts */
-  for(;;) {
-    if(flag_1hz) {
-      LED2 = 0;
-      flag_1hz = 0;
-      uart0_puts("Hello, RL78! [:");
-      LED2 = 1;
-    }
-    asm ("halt");
-  }
-}