osd-contiki/platform/mb851/contiki-conf.h

/**
 * \addtogroup mb851-platform
 *
 * @{
 */

/*
 * Copyright (c) 2010, STMicroelectronics.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above
 *    copyright notice, this list of conditions and the following
 *    disclaimer in the documentation and/or other materials provided
 *    with the distribution.
 * 3. The name of the author may not be used to endorse or promote
 *    products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/**
* \file
*			contiki-conf.h for MB851.
* \author
*			Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*			Chi-Anh La <la@imag.fr>
*     Simon Duquennoy <simonduq@sics.se>
*/

#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__

#ifdef PLATFORM_CONF_H
#include PLATFORM_CONF_H
#else
#include "platform-conf.h"
#endif /* PLATFORM_CONF_H */

/* Radio and 802.15.4 params */
/* 802.15.4 radio channel */
#define RF_CHANNEL                              26
/* 802.15.4 PAN ID */
#define IEEE802154_CONF_PANID                   0xabcd
/* Use EID 64, enable hardware autoack and address filtering */
#define RIMEADDR_CONF_SIZE                      8
#define UIP_CONF_LL_802154                      1
#define ST_CONF_RADIO_AUTOACK                   1
/* Number of buffers for incoming frames */
#define RADIO_RXBUFS                            2
/* Set to 0 for non ethernet links */
#define UIP_CONF_LLH_LEN                        0

/* RDC params */
/* TX routine passes the cca/ack result in the return parameter */
#define RDC_CONF_HARDWARE_ACK                   1
/* TX routine does automatic cca and optional backoff */
#define RDC_CONF_HARDWARE_CSMA                  0
/* RDC debug with LED */
#define RDC_CONF_DEBUG_LED                      0
/* Channel check rate (per second) */
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE    8
/* Use ACK for optimization (LPP, XMAC) */
#define WITH_ACK_OPTIMIZATION                   0

/* Netstack config */
#define NETSTACK_CONF_MAC                       csma_driver
#define NETSTACK_CONF_RDC                       contikimac_driver
#define NETSTACK_CONF_FRAMER                    framer_802154
#define NETSTACK_CONF_RADIO                     stm32w_radio_driver

/* ContikiMAC config */
#define CONTIKIMAC_CONF_COMPOWER                0
#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT    0
#define CONTIKIMAC_CONF_ANNOUNCEMENTS           0
#define CONTIKIMAC_CONF_WITH_PHASE_OPTIMIZATION 0

/* CXMAC config */
#define CXMAC_CONF_ANNOUNCEMENTS                0
#define CXMAC_CONF_COMPOWER                     1

/* XMAC config */
#define XMAC_CONF_ANNOUNCEMENTS                 0
#define XMAC_CONF_COMPOWER                      1

/* Other (RAM saving) */
#define ENERGEST_CONF_ON                        0
#define QUEUEBUF_CONF_NUM                       2
#define QUEUEBUF_CONF_REF_NUM                   0
#define UIP_CONF_DS6_NBR_NBU                    4
#define UIP_CONF_MAX_ROUTES                  4
#define RPL_CONF_MAX_PARENTS_PER_DAG            4
#define RPL_CONF_MAX_INSTANCES                  1
#define RPL_CONF_MAX_DAG_PER_INSTANCE           1
#define PROCESS_CONF_NUMEVENTS                  16

#if WITH_UIP6

/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK                   sicslowpan_driver

/* 
 * Specify a minimum packet size for 6lowpan compression to be
 * enabled. This is needed for ContikiMAC, which needs packets to be
 * larger than a specified size, if no ContikiMAC header should 
 * be used.
 */
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD   63
#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER  0

#define UIP_CONF_ROUTER	                        1
#define UIP_CONF_IPV6_RPL                       1
#define UIP_CONF_ND6_SEND_RA                    0

#define UIP_CONF_BUFFER_SIZE		        140

#define UIP_CONF_IPV6		                1
#define UIP_CONF_IPV6_QUEUE_PKT	                0
#define UIP_CONF_IPV6_CHECKS	                1
#define UIP_CONF_IPV6_REASSEMBLY                0
#define UIP_CONF_ND6_MAX_PREFIXES               2
#define UIP_CONF_ND6_MAX_NEIGHBORS              2
#define UIP_CONF_ND6_MAX_DEFROUTERS	        1
#define UIP_CONF_IP_FORWARD		        0
#define UIP_CONF_MAX_CONNECTIONS	        4
#define UIP_CONF_MAX_LISTENPORTS	        8
#define UIP_CONF_UDP_CONNS		        4

#define SICSLOWPAN_CONF_COMPRESSION             SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG                    1
#endif /* SICSLOWPAN_CONF_FRAG */
#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS       2
#endif /* SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS */
#ifndef SICSLOWPAN_CONF_MAXAGE
#define SICSLOWPAN_CONF_MAXAGE                  2
#endif /* SICSLOWPAN_CONF_MAXAGE */

#else /* WITH_UIP6 */

/* Network setup for non-IPv6 (rime). */
#define NETSTACK_CONF_NETWORK                   rime_driver

#endif /* WITH_UIP6 */

#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */

#ifdef PLATFORM_CONF
#include PLATFORM_CONF
#endif /* PLATFORM_CONF */

#endif /* __CONTIKI_CONF_H__ */
/** @} */