osd-contiki/platform/z1/dev/sht25.c

135 lines
4.1 KiB
C
Raw Normal View History

2015-03-10 13:09:31 +01:00
/*
* Copyright (c) 2015, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* SHT25 temperature and humidity sensor driver
* \author
* Antonio Lignan <alinan@zolertia.com>
*/
#include <stdio.h>
#include "contiki.h"
#include "i2cmaster.h"
#include "dev/sht25.h"
#include "lib/sensors.h"
/*---------------------------------------------------------------------------*/
static uint8_t enabled;
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
if(type != SENSORS_ACTIVE) {
2015-03-10 13:09:31 +01:00
return SHT25_ERROR;
}
if(value) {
i2c_enable();
} else {
i2c_disable();
}
enabled = value;
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
switch(type) {
case SENSORS_ACTIVE:
case SENSORS_READY:
return enabled;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static uint16_t
sht25_read_reg(uint8_t reg)
{
uint8_t buf[] = { 0x00, 0x00 };
uint16_t retval;
uint8_t rtx = reg;
/* transmit the register to read */
i2c_transmitinit(SHT25_ADDR);
while(i2c_busy());
i2c_transmit_n(1, &rtx);
while(i2c_busy());
/* receive the data */
i2c_receiveinit(SHT25_ADDR);
while(i2c_busy());
i2c_receive_n(2, &buf[0]);
while(i2c_busy());
retval = (uint16_t)(buf[0] << 8 | (buf[1]));
return retval;
}
/*---------------------------------------------------------------------------*/
static int16_t
sht25_convert(uint8_t variable, uint16_t value)
{
int16_t rd;
uint32_t buff;
buff = (uint32_t)value;
if(variable == SHT25_VAL_TEMP) {
buff *= 17572;
buff = buff >> 16;
rd = (int16_t)buff - 4685;
} else {
buff *= 12500;
buff = buff >> 16;
rd = (int16_t)buff - 600;
rd = (rd > 10000) ? 10000 : rd;
}
return rd;
}
/*---------------------------------------------------------------------------*/
static int16_t
sht25_read(uint8_t variable)
{
int16_t rd;
uint16_t raw;
if((variable != SHT25_VAL_TEMP) && (variable != SHT25_VAL_HUM)) {
return SHT25_ERROR;
}
raw = sht25_read_reg(variable);
rd = sht25_convert(variable, raw);
return rd;
}
/*---------------------------------------------------------------------------*/
2015-03-25 13:51:50 +01:00
static int
value(int type)
2015-03-10 13:09:31 +01:00
{
return sht25_read(type);
}
/*---------------------------------------------------------------------------*/
2015-03-25 13:51:50 +01:00
SENSORS_SENSOR(sht25, SHT25_SENSOR, value, configure, status);
2015-03-10 13:09:31 +01:00
/*---------------------------------------------------------------------------*/