osd-contiki/platform/avr-raven/contiki-conf.h

245 lines
8.4 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$$
*/
/**
* \file
* Configuration for Atmel Raven
*
* \author
* Simon Barner <barner@in.tum.de>
* David Kopf <dak664@embarqmail.com>
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
/* MCU and clock rate */
#define MCU_MHZ 8
#define PLATFORM PLATFORM_AVR
2010-02-26 22:15:28 +01:00
#define RAVEN_REVISION RAVEN_D
/* Clock ticks per second */
#define CLOCK_CONF_SECOND 125
/* Since clock_time_t is 16 bits, maximum interval is 524 seconds */
#define RIME_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME CLOCK_CONF_SECOND * 524UL /*Default uses 600*/
/* Maximum time interval (used for timers) */
#define INFINITE_TIME 0xffff
/* COM port to be used for SLIP connection */
#define SLIP_PORT RS232_PORT_0
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
#define MMEM_CONF_SIZE 256
/* Use the following address for code received via the codeprop
* facility
*/
#define EEPROMFS_ADDR_CODEPROP 0x8000
#define CCIF
#define CLIF
#define RIMEADDR_CONF_SIZE 8
2010-11-12 18:15:00 +01:00
//define UIP_CONF_IPV6 1 //Let the makefile do this, allows hello-world to compile
#if UIP_CONF_IPV6
#define UIP_CONF_ICMP6 1
#define UIP_CONF_UDP 1
#define UIP_CONF_TCP 1
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
2010-11-12 18:15:00 +01:00
#else
#define NETSTACK_CONF_NETWORK rime_driver
#endif
2010-02-08 23:09:25 +01:00
2010-11-12 18:15:00 +01:00
/* The new NETSTACK interface requires RF230BB */
#if RF230BB
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //for barebones driver, sicslowpan calls radio->read function
2010-02-16 23:22:13 +01:00
#undef PACKETBUF_CONF_HDR_SIZE //RF230BB takes the packetbuf default for header size
#else
#define PACKETBUF_CONF_HDR_SIZE 0 //RF230 handles headers internally
#endif /*RF230BB */
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#if 1 /* Network setup */
/* No radio cycling */
2010-11-12 18:15:00 +01:00
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC sicslowmac_driver
2010-03-02 17:25:47 +01:00
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO rf230_driver
2010-03-02 17:25:47 +01:00
#define RF230_CONF_AUTOACK 1
#define RF230_CONF_AUTORETRIES 2
#define SICSLOWPAN_CONF_FRAG 1
//Most browsers reissue GETs after 3 seconds which stops frag reassembly, longer MAXAGE does no good
#define SICSLOWPAN_CONF_MAXAGE 3
#define QUEUEBUF_CONF_NUM 1
#define QUEUEBUF_CONF_REF_NUM 1
#elif 0
/* Contiki-mac radio cycling */
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC contikimac_driver
2010-03-02 17:25:47 +01:00
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO rf230_driver
2010-03-02 17:25:47 +01:00
#define RF230_CONF_AUTOACK 0
#define RF230_CONF_AUTORETRIES 0
2010-03-02 17:25:47 +01:00
#elif 0
/* cx-mac radio cycling */
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC cxmac_driver
2010-03-02 17:25:47 +01:00
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO rf230_driver
2010-03-02 17:25:47 +01:00
#define RF230_CONF_AUTOACK 0
#define RF230_CONF_AUTORETRIES 0
2010-02-16 23:22:13 +01:00
#define MAC_CONF_CHANNEL_CHECK_RATE 8
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 3
#define QUEUEBUF_CONF_NUM 4
#define QUEUEBUF_CONF_REF_NUM 2
//Below will prevent fragmentation of TCP packets, undef for faster page loads, simpler wireshark captures
//#define UIP_CONF_TCP_MSS 48
//Below gives 10% duty cycle, undef for default 5%
//#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 80)
//Below gives 50% duty cycle
2010-03-02 17:25:47 +01:00
//#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 16)
2010-03-02 17:25:47 +01:00
#else
#error Network configuration not specified!
#endif /* Network setup */
/* Logging adds 200 bytes to program size */
#define LOG_CONF_ENABLED 1
#define UIP_CONF_LL_802154 1
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_MAX_CONNECTIONS 2
#define UIP_CONF_MAX_LISTENPORTS 2
#define UIP_CONF_UDP_CONNS 2
#define UIP_CONF_IP_FORWARD 0
#define UIP_CONF_FWCACHE_SIZE 0
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_QUEUE_PKT 1
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_TCP_SPLIT 1
/* ************************************************************************** */
//#pragma mark RPL Settings
/* ************************************************************************** */
#if UIP_CONF_IPV6 //Allows hello-world ip4 to compile
#define UIP_CONF_IPV6_RPL 0
#endif
#if UIP_CONF_IPV6_RPL
/* Define MAX_*X_POWER to reduce tx power and ignore weak rx packets for testing a miniature multihop network.
* Leave undefined for full power and sensitivity.
* tx=0 (3dbm, default) to 15 (-17.2dbm)
* RF230_CONF_AUTOACK sets the extended mode using the energy-detect register with rx=0 (-91dBm) to 84 (-7dBm)
* else the rssi register is used having range 0 (91dBm) to 28 (-10dBm)
* For simplicity RF230_MIN_RX_POWER is based on the energy-detect value and divided by 3 when autoack is not set.
* On the RF230 a reduced rx power threshold will not prevent autoack if enabled and requested.
* These numbers applied to both Raven and Jackdaw give a maximum communication distance of about 15 cm
* and a 10 meter range to a full-sensitivity RF230 sniffer.
*/
//#define RF230_MAX_TX_POWER 15
//#define RF230_MIN_RX_POWER 30
2010-11-03 17:51:55 +01:00
#define UIP_CONF_ROUTER 1
#define UIP_CONF_IPV6_RPL 1
/* Handle 10 neighbors */
#define UIP_CONF_DS6_NBR_NBU 10
2010-11-03 17:51:55 +01:00
/* Handle 10 routes */
#define UIP_CONF_DS6_ROUTE_NBU 10
2010-11-03 17:51:55 +01:00
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_ND6_REACHABLE_TIME 600000
#define UIP_CONF_ND6_RETRANS_TIMER 10000
#undef UIP_CONF_IPV6_QUEUE_PKT
#define UIP_CONF_IPV6_QUEUE_PKT 1
//#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#define UIP_CONF_IP_FORWARD 0
//#define UIP_CONF_BUFFER_SIZE 240
//#define UIP_CONF_ICMP_DEST_UNREACH 1
//#define UIP_CONF_DHCP_LIGHT
#undef UIP_CONF_LLH_LEN
#define UIP_CONF_LLH_LEN 0
//#define UIP_CONF_RECEIVE_WINDOW 48
//#define UIP_CONF_TCP_MSS 48
#undef UIP_CONF_UDP_CONNS
#define UIP_CONF_UDP_CONNS 12
#undef UIP_CONF_FWCACHE_SIZE
#define UIP_CONF_FWCACHE_SIZE 30
#define UIP_CONF_BROADCAST 1
#define UIP_ARCH_IPCHKSUM 1
#define UIP_CONF_PINGADDRCONF 0
#define UIP_CONF_LOGGING 0
#endif /* RPL */
#include <stdint.h>
typedef int32_t s32_t;
typedef unsigned short clock_time_t;
typedef unsigned char u8_t;
typedef unsigned short u16_t;
typedef unsigned long u32_t;
typedef unsigned short uip_stats_t;
typedef unsigned long off_t;
void clock_delay(unsigned int us2);
void clock_wait(int ms10);
void clock_set_seconds(unsigned long s);
unsigned long clock_seconds(void);
#endif /* __CONTIKI_CONF_H__ */