2017-09-08 11:27:17 +02:00
|
|
|
Getting Started with OSD-Contiki using osd-merkur-256 merkurboard
|
|
|
|
|
=============================================================
|
|
|
|
|
This guide's aim is to help you start using Contiki for merkurboards
|
|
|
|
|
The platform supports different AtMega-RF boards:
|
|
|
|
|
|
|
|
|
|
* Based on MCU AtMega256RFR2
|
|
|
|
|
* Based on MCU AtMega128RFA1
|
|
|
|
|
|
|
|
|
|
Boards all looks the same. AtMega256RFR2 boards are labeled with "deRFmega256".
|
|
|
|
|
The platform and CPU code, are common for both boards, can be found under
|
|
|
|
|
`$(CONTIKI)/platfrom/osd-merkur-256`,
|
|
|
|
|
`$(CONTIKI)/platfrom/osd-merkur-128`
|
|
|
|
|
The port was developed and tested with Merkurboard.
|
|
|
|
|
This guide assumes that you have basic understanding of how to use the
|
|
|
|
|
command line and perform basic admin tasks on UNIX family OSs. You should
|
|
|
|
|
also have understanding about the Contiki OS design as well have C
|
|
|
|
|
programming skills.
|
|
|
|
|
|
|
|
|
|
OSD-Contiki Features
|
|
|
|
|
--------------------
|
|
|
|
|
* Contiki Features
|
|
|
|
|
* Arduino compatible
|
|
|
|
|
* use Arduino Libs in your Project (see ../examples/osd/arduino-* )
|
|
|
|
|
* store rf parameter at eeprom
|
|
|
|
|
* OTA-Features (Update over the Air)
|
|
|
|
|
|
|
|
|
|
Board Features
|
|
|
|
|
----------------
|
|
|
|
|
* wire Antenna.
|
|
|
|
|
* Robust radio performance. Up to 300 meter line-of-sight.
|
|
|
|
|
* Unique EUI64 address via Bootloader
|
|
|
|
|
* 32kHz RTC xtal
|
|
|
|
|
* Standard. 6-pin TTL-USB header for FTDI cable for UART.
|
|
|
|
|
* PCB formfactor for cheap project breadboard
|
|
|
|
|
* Power/current:
|
|
|
|
|
* RX ~10mA (Full RPC AtMegaXXRFR2).
|
|
|
|
|
* Sleep ~45uA @ 16MHz XTAL
|
|
|
|
|
* Sleep ~15uA @ 8MHz using internal oscillator
|
|
|
|
|
* Preprogammed arduino bootloader with update over the Air support.
|
|
|
|
|
* CE certified by test institute.
|
|
|
|
|
|
|
|
|
|
UART
|
|
|
|
|
----
|
|
|
|
|
The board has one UART via the 6-pin TTL-USB adapter, The recommended
|
|
|
|
|
baudrate is 38400 bps. This speed gives the lowest error with respect
|
|
|
|
|
of the used clock frequency used internally. A possible hi-speed is
|
|
|
|
|
250000 bps wich gives 0% Error with 16MHz clock.
|
|
|
|
|
|
|
|
|
|
Port Features
|
|
|
|
|
--------------
|
|
|
|
|
The platform has the following key features:
|
|
|
|
|
* Standard, E64 address from built-in chip.
|
|
|
|
|
* First hooks for RPC (Reduced Power Consumption) for AtMegaXXXRFR2.
|
|
|
|
|
|
|
|
|
|
Toolchain needs
|
|
|
|
|
---------------
|
|
|
|
|
The Atmel toolcahin is available in most operating system.
|
|
|
|
|
Note. We use Debian 9 as reference Linux
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
###### For Linux
|
|
|
|
|
|
|
|
|
|
sudo apt-get install avr-libc binutils-avr gcc-avr gdb-avr simulavr avrdude make git
|
2017-09-08 13:21:51 +02:00
|
|
|
|
2017-09-08 11:27:17 +02:00
|
|
|
sudo apt-get install python-pip
|
2017-09-08 13:21:51 +02:00
|
|
|
|
2017-09-08 11:27:17 +02:00
|
|
|
pip install intelhex
|
2017-09-08 13:21:51 +02:00
|
|
|
|
2017-09-08 11:27:17 +02:00
|
|
|
sudo apt-get install picocom libcoap-1-0-bin
|
|
|
|
|
|
|
|
|
|
###### For Windows
|
|
|
|
|
|
|
|
|
|
Goes here // todo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
get the source code:
|
|
|
|
|
--------------------
|
|
|
|
|
|
|
|
|
|
git clone https://github.com/osdomotics/osd-contiki.git
|
|
|
|
|
cd osd-contiki
|
|
|
|
|
git submodule update --init --recursive
|
|
|
|
|
|
|
|
|
|
Contiki build TARGET
|
|
|
|
|
--------------------
|
|
|
|
|
|
|
|
|
|
For AtMega128RFR2 boards:
|
|
|
|
|
|
|
|
|
|
make TARGET=osd-merkur-256
|
|
|
|
|
|
|
|
|
|
For AtMega128RFA1 boards:
|
|
|
|
|
|
|
|
|
|
make TARGET=osd-merkur-128
|
|
|
|
|
|
|
|
|
|
Flashing
|
|
|
|
|
--------
|
|
|
|
|
Programming using avrdude using serial bootloader. (TTL-USB cable)
|
|
|
|
|
|
|
|
|
|
Flashing commnad line example 256k MCU:
|
|
|
|
|
|
|
|
|
|
make TARGET=osd-merkur-256 flash
|
|
|
|
|
|
|
|
|
|
Flashing commnad line example 128k MCU:
|
|
|
|
|
|
|
|
|
|
make TARGET=osd-merkur-128 flash
|
|
|
|
|
|
|
|
|
|
Tested applications and examples
|
|
|
|
|
---------------------------------
|
|
|
|
|
|
|
|
|
|
see osd-contiki/example/osd/..
|
|
|
|
|
|
|
|
|
|
Platform tutorial applications
|
|
|
|
|
-----------------------------
|
|
|
|
|
|
|
|
|
|
todo ...
|
|
|
|
|
|
|
|
|
|
Regressions tests
|
|
|
|
|
-----------------
|
|
|
|
|
Travis compile regression test for the platform:
|
|
|
|
|
[regression-tests/20-compile-osd-ports](../../regression-tests/20-compile-osd-ports).
|
|
|
|
|
|
|
|
|
|
This port adds newer version of `avr-gcc` compiler (4.9.2), to support
|
|
|
|
|
testing of newer Atmel MCU as Atmega256RFR2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Board approvals
|
|
|
|
|
---------------
|
|
|
|
|
Summary:
|
|
|
|
|
* R&TTE 73/23/EEC, 89/336/EEC and 99/5/EC
|
|
|
|
|
* Safety: EN 60950-1:2006 + A12: 2011
|
|
|
|
|
* RF: ETSI EN 300 328 V1.7.1 (2006-10)
|
|
|
|
|
* EMC: ETSI EN 301 489-1 V1.9.2 (2011-09), ETSI EN 301 489-17 V2.2.1 (2012-09)
|
|
|
|
|
* EMF: EN 62479:2010
|
|
|
|
|
* Human exposure to electromagnetic fields: EN 62479:2010
|
|
|
|
|
|
|
|
|
|
Commercial availability
|
|
|
|
|
------------------------
|
|
|
|
|
Through vendor and though resellers. Note board is will only available
|
|
|
|
|
were CE approval is covered. This may be further restricted by WEEE.
|
|
|
|
|
Contact vendor. For research legislation is more relaxed in most
|
|
|
|
|
countries.
|
|
|
|
|
|
|
|
|
|
References
|
|
|
|
|
----------
|
|
|
|
|
AtMega64/128/256/RFR2 chip documentation available via Atmel.
|
|
|
|
|
Schematics and boards description. Available via Radio-Senors
|
|
|
|
|
Smart Reduced Power Consumption Techniques. AT02594 available via Atmel.
|
|
|
|
|
|
|
|
|
|
ToDo
|
|
|
|
|
-----
|
|
|
|
|
API for radio power saving settings introduced Atmels app note AT02594.
|
|
|
|
|
Also function for the desensitizing RPC resister.
|
|
|
|
|
|
|
|
|
|
Vendor info
|
|
|
|
|
-----------
|
|
|
|
|
http://wiki.osdomotics.com
|
|
|
|
|
http://iot-shop.at/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maintainer
|
|
|
|
|
----------
|
|
|
|
|
Harald Pichler <harald@the-develop.net>
|
