osd-contiki/platform/mbxxx/contiki-conf.h

/**
 * \addtogroup mbxxx-platform
 *
 * @{
 */
/*
 * Copyright (c) 2010, STMicroelectronics.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above
 *    copyright notice, this list of conditions and the following
 *    disclaimer in the documentation and/or other materials provided
 *    with the distribution.
 * 3. The name of the author may not be used to endorse or promote
 *    products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * This file is part of the Contiki OS
 *
 */
/*---------------------------------------------------------------------------*/
/**
* \file
*          Contiki-conf.h for MBXXX.
* \author
*          Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*          Chi-Anh La <la@imag.fr>
*          Simon Duquennoy <simonduq@sics.se>
*/
/*---------------------------------------------------------------------------*/



#ifndef CONTIKI_CONF_H_
#define CONTIKI_CONF_H_

#ifdef PLATFORM_CONF_H
#include PLATFORM_CONF_H
#else
#include "platform-conf.h"
#endif /* PLATFORM_CONF_H */

/* Radio and 802.15.4 params */
/* 802.15.4 radio channel */
#define RF_CHANNEL						16
/* 802.15.4 PAN ID */
#define IEEE802154_CONF_PANID					0x1234
/* Use EID 64, enable hardware autoack and address filtering */
#define LINKADDR_CONF_SIZE					8
#define UIP_CONF_LL_802154					1
#define ST_CONF_RADIO_AUTOACK					1
/* Number of buffers for incoming frames */
#define RADIO_RXBUFS						2
/* Set to 0 for non ethernet links */
#define UIP_CONF_LLH_LEN					0

/* RDC params */
/* TX routine passes the cca/ack result in the return parameter */
#define RDC_CONF_HARDWARE_ACK					1
/* TX routine does automatic cca and optional backoff */
#define RDC_CONF_HARDWARE_CSMA					0
/* RDC debug with LED */
#define RDC_CONF_DEBUG_LED					1
/* Channel check rate (per second) */
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE			8
/* Use ACK for optimization (LPP, XMAC) */
#define WITH_ACK_OPTIMIZATION					0

/* Netstack config */
//#define NETSTACK_CONF_MAC					csma_driver
//#define NETSTACK_CONF_RDC					contikimac_driver
#define NETSTACK_CONF_MAC					nullmac_driver
#define NETSTACK_CONF_RDC					nullrdc_driver
#define NETSTACK_CONF_FRAMER					framer_802154
#define NETSTACK_CONF_RADIO					stm32w_radio_driver

/* ContikiMAC config */
#define CONTIKIMAC_CONF_COMPOWER				1
#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT			0
#define CONTIKIMAC_CONF_ANNOUNCEMENTS				0

/* CXMAC config */
#define CXMAC_CONF_ANNOUNCEMENTS				0
#define CXMAC_CONF_COMPOWER					1

/* XMAC config */
#define XMAC_CONF_ANNOUNCEMENTS					0
#define XMAC_CONF_COMPOWER					1

/* Other (RAM saving) */
#define ENERGEST_CONF_ON					0
#define QUEUEBUF_CONF_NUM					2
#define QUEUEBUF_CONF_REF_NUM					0
#define NBR_TABLE_CONF_MAX_NEIGHBORS				4
#define UIP_CONF_DS6_ROUTE_NBU					4
#define RPL_CONF_MAX_PARENTS_PER_DAG				4
#define RPL_CONF_MAX_INSTANCES					1
#define RPL_CONF_MAX_DAG_PER_INSTANCE				1
#define PROCESS_CONF_NUMEVENTS					16

#if NETSTACK_CONF_WITH_IPV6

/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver

/* Specify a minimum packet size for 6lowpan compression to be
   enabled. This is needed for ContikiMAC, which needs packets to be
   larger than a specified size, if no ContikiMAC header should be
   used. */
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD			63

#define UIP_CONF_UDP                				1

#if (WITH_COAP==7) || (WITH_COAP==6) || (WITH_COAP==3)
#define UIP_CONF_TCP						0
#else
#define UIP_CONF_TCP						1
#endif /* WITH_COAP */

#define UIP_CONF_ROUTER						1
#define UIP_CONF_ND6_SEND_RA					0

#define NETSTACK_CONF_WITH_IPV6						1
#define UIP_CONF_IPV6_QUEUE_PKT					0
#define UIP_CONF_IPV6_CHECKS					1
#define UIP_CONF_IPV6_REASSEMBLY				0
#define UIP_CONF_IP_FORWARD					0
#define UIP_CONF_BUFFER_SIZE					140
#define UIP_CONF_MAX_CONNECTIONS				4
#define UIP_CONF_MAX_LISTENPORTS				8
#define UIP_CONF_UDP_CONNS					4

#define SICSLOWPAN_CONF_COMPRESSION				SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG					1
#endif /* SICSLOWPAN_CONF_FRAG */
#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS			2
#endif /* SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS */
#ifndef SICSLOWPAN_CONF_MAXAGE
#define SICSLOWPAN_CONF_MAXAGE					2
#endif /* SICSLOWPAN_CONF_MAXAGE */

#else /* NETSTACK_CONF_WITH_IPV6 */

/* Network setup for non-IPv6 (rime). */
#define NETSTACK_CONF_NETWORK					rime_driver

#endif /* NETSTACK_CONF_WITH_IPV6 */

#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */

#endif /* CONTIKI_CONF_H_ */
/** @} */