osd-contiki/examples/osd/servo-sensor/Makefile

EXE=er-example-server

all: $(EXE)

# for some platforms
UIP_CONF_IPV6=1
# IPv6 make config disappeared completely
CFLAGS += -DUIP_CONF_IPV6=1

CONTIKI=../../..
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
CFLAGS += -DUIP_CONF_IPV6_RPL=1

# linker optimizations
SMALL=1

APPS += er-coap
APPS += rest-engine

include $(CONTIKI)/Makefile.include

# border router rules
$(CONTIKI)/tools/tunslip6:	$(CONTIKI)/tools/tunslip6.c
	(cd $(CONTIKI)/tools && $(MAKE) tunslip6)

connect-router:	$(CONTIKI)/tools/tunslip6
	sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64

connect-router-cooja:	$(CONTIKI)/tools/tunslip6
	sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64

connect-minimal:
	sudo ip address add fdfd::1/64 dev tap0
Multi-platform support, osd-merkur-{128,256} Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework all osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed. 2016-04-22 17:51:59 +02:00			`EXE=er-example-server`
add servo example 2013-02-22 17:04:19 +01:00
Multi-platform support, osd-merkur-{128,256} Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework all osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed. 2016-04-22 17:51:59 +02:00			`all: $(EXE)`
add servo example 2013-02-22 17:04:19 +01:00
			`# for some platforms`
			`UIP_CONF_IPV6=1`
cleanup code, add coap13 support 2013-12-02 15:53:10 +01:00			`# IPv6 make config disappeared completely`
			`CFLAGS += -DUIP_CONF_IPV6=1`
add servo example 2013-02-22 17:04:19 +01:00
cleanup code, add coap13 support 2013-12-02 15:53:10 +01:00			`CONTIKI=../../..`
			`CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"`
			`CFLAGS += -DUIP_CONF_IPV6_RPL=1`
add servo example 2013-02-22 17:04:19 +01:00
			`# linker optimizations`
			`SMALL=1`

Fix servo example 2015-04-03 14:31:25 +02:00			`APPS += er-coap`
			`APPS += rest-engine`
add servo example 2013-02-22 17:04:19 +01:00
			`include $(CONTIKI)/Makefile.include`

			`# border router rules`
			`$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c`
			`(cd $(CONTIKI)/tools && $(MAKE) tunslip6)`

			`connect-router: $(CONTIKI)/tools/tunslip6`
			`sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64`

			`connect-router-cooja: $(CONTIKI)/tools/tunslip6`
			`sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64`

cleanup code, add coap13 support 2013-12-02 15:53:10 +01:00			`connect-minimal:`
add servo example 2013-02-22 17:04:19 +01:00			`sudo ip address add fdfd::1/64 dev tap0`