osd-contiki/platform/srf06-cc26xx/srf06/cc13xx/board.h

243 lines
9.1 KiB
C
Raw Normal View History

2015-02-25 13:10:26 +01:00
/*
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/** \addtogroup cc26xx-srf-tag
* @{
*
* \defgroup srf06-cc13xx-peripherals Peripherals for the SmartRF06EB + CC1310EM
2015-02-25 13:10:26 +01:00
*
* Defines related to the SmartRF06 Evaluation Board with a CC1310EM
2015-02-25 13:10:26 +01:00
*
* This file provides connectivity information on LEDs, Buttons, UART and
* other peripherals
*
* This file can be used as the basis to configure other boards using the
* CC13xx/CC26xx code as their basis.
2015-02-25 13:10:26 +01:00
*
* This file is not meant to be modified by the user.
* @{
*
* \file
* Header file with definitions related to the I/O connections on the TI
* SmartRF06 Evaluation Board with a CC1310EM
2015-02-25 13:10:26 +01:00
*
* \note Do not include this file directly. It gets included by contiki-conf
* after all relevant directives have been set.
*/
/*---------------------------------------------------------------------------*/
#ifndef BOARD_H_
#define BOARD_H_
/*---------------------------------------------------------------------------*/
#include "ioc.h"
/*---------------------------------------------------------------------------*/
/**
* \name LED configurations
*
* Those values are not meant to be modified by the user
* @{
*/
/* Some files include leds.h before us, so we need to get rid of defaults in
* leds.h before we provide correct definitions */
#undef LEDS_GREEN
#undef LEDS_YELLOW
#undef LEDS_RED
#undef LEDS_CONF_ALL
#define LEDS_RED 1 /**< LED1 (Red) */
#define LEDS_YELLOW 2 /**< LED2 (Yellow) */
#define LEDS_GREEN 4 /**< LED3 (Green) */
#define LEDS_ORANGE 8 /**< LED4 (Orange) */
#define LEDS_CONF_ALL 15
/* Notify various examples that we have LEDs */
#define PLATFORM_HAS_LEDS 1
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name LED IOID mappings
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_LED_1 IOID_25
#define BOARD_IOID_LED_2 IOID_27
#define BOARD_IOID_LED_3 IOID_7
#define BOARD_IOID_LED_4 IOID_6
#define BOARD_LED_1 (1 << BOARD_IOID_LED_1)
#define BOARD_LED_2 (1 << BOARD_IOID_LED_2)
#define BOARD_LED_3 (1 << BOARD_IOID_LED_3)
#define BOARD_LED_4 (1 << BOARD_IOID_LED_4)
#define BOARD_LED_ALL (BOARD_LED_1 | BOARD_LED_2 | BOARD_LED_3 | \
BOARD_LED_4)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name UART IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_UART_RX IOID_2
#define BOARD_IOID_UART_TX IOID_3
2015-05-01 16:45:11 +02:00
#define BOARD_IOID_UART_CTS IOID_UNUSED
#define BOARD_IOID_UART_RTS IOID_UNUSED
2015-02-25 13:10:26 +01:00
#define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
#define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name Button IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_KEY_LEFT IOID_15
#define BOARD_IOID_KEY_RIGHT IOID_18
#define BOARD_IOID_KEY_UP IOID_19
#define BOARD_IOID_KEY_DOWN IOID_12
#define BOARD_IOID_KEY_SELECT IOID_11
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
#define BOARD_KEY_UP (1 << BOARD_IOID_KEY_UP)
#define BOARD_KEY_DOWN (1 << BOARD_IOID_KEY_DOWN)
#define BOARD_KEY_SELECT (1 << BOARD_IOID_KEY_SELECT)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name 3.3V domain IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_3V3_EN IOID_13
#define BOARD_3V3_EN (1 << BOARD_IOID_3V3_EN)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name SPI IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_SPI_SCK IOID_10
#define BOARD_IOID_SPI_MOSI IOID_9
#define BOARD_IOID_SPI_MISO IOID_8
#define BOARD_SPI_SCK (1 << BOARD_IOID_SPI_SCK)
#define BOARD_SPI_MOSI (1 << BOARD_IOID_SPI_MOSI)
#define BOARD_SPI_MISO (1 << BOARD_IOID_SPI_MISO)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name LCD IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_LCD_MODE IOID_4
#define BOARD_IOID_LCD_RST IOID_5
#define BOARD_IOID_LCD_CS IOID_14
#define BOARD_IOID_LCD_SCK BOARD_IOID_SPI_SCK
#define BOARD_IOID_LCD_MOSI BOARD_IOID_SPI_MOSI
#define BOARD_LCD_MODE (1 << BOARD_IOID_LCD_MODE)
#define BOARD_LCD_RST (1 << BOARD_IOID_LCD_RST)
#define BOARD_LCD_CS (1 << BOARD_IOID_LCD_CS)
#define BOARD_LCD_SCK BOARD_SPI_SCK
#define BOARD_LCD_MOSI BOARD_SPI_MOSI
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name SD Card IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_SDCARD_CS IOID_30
#define BOARD_SDCARD_CS (1 << BOARD_IOID_SDCARD_CS)
#define BOARD_IOID_SDCARD_SCK BOARD_IOID_SPI_SCK
#define BOARD_SDCARD_SCK BOARD_SPI_SCK
#define BOARD_IOID_SDCARD_MOSI BOARD_IOID_SPI_MOSI
#define BOARD_SDCARD_MOSI BOARD_SPI_MOSI
#define BOARD_IOID_SDCARD_MISO BOARD_IOID_SPI_MISO
#define BOARD_SDCARD_MISO BOARD_SPI_MISO
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name ALS IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_ALS_PWR IOID_26
#define BOARD_IOID_ALS_OUT IOID_23
#define BOARD_ALS_PWR (1 << BOARD_IOID_ALS_PWR)
#define BOARD_ALS_OUT (1 << BOARD_IOID_ALS_OUT)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name ACC IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_ACC_PWR IOID_20
#define BOARD_IOID_ACC_INT IOID_28
#define BOARD_IOID_ACC_INT1 IOID_28
#define BOARD_IOID_ACC_INT2 IOID_29
#define BOARD_IOID_ACC_CS IOID_24
#define BOARD_ACC_PWR (1 << BOARD_IOID_ACC_PWR)
#define BOARD_ACC_INT (1 << BOARD_IOID_ACC_INT)
#define BOARD_ACC_INT1 (1 << BOARD_IOID_ACC_INT1)
#define BOARD_ACC_INT2 (1 << BOARD_IOID_ACC_INT2)
#define BOARD_ACC_CS (1 << BOARD_IOID_ACC_CS)
#define BOARD_IOID_ACC_SCK BOARD_IOID_SPI_SCK
#define BOARD_ACC_SCK BOARD_SPI_SCK
#define BOARD_IOID_ACC_MOSI BOARD_IOID_SPI_MOSI
#define BOARD_ACC_MOSI BOARD_SPI_MOSI
#define BOARD_IOID_ACC_MISO BOARD_IOID_SPI_MISO
#define BOARD_ACC_MISO BOARD_SPI_MISO
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name Device string used on startup
* @{
*/
#define BOARD_STRING "TI SmartRF06EB + CC13xx EM"
2015-02-25 13:10:26 +01:00
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* BOARD_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/