osd-contiki/cpu/msp430/clock.c

211 lines
5.9 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: clock.c,v 1.21 2010/01/30 14:03:35 adamdunkels Exp $
*/
#include <io.h>
#include <signal.h>
#include "contiki-conf.h"
2008-07-04 01:59:20 +02:00
#include "sys/energest.h"
#include "sys/clock.h"
#include "sys/etimer.h"
#include "rtimer-arch.h"
#define INTERVAL (RTIMER_ARCH_SECOND / CLOCK_SECOND)
2006-08-17 17:25:46 +02:00
#define MAX_TICKS (~((clock_time_t)0) / 2)
static volatile unsigned long seconds;
static volatile clock_time_t count = 0;
/* last_tar is used for calculating clock_fine, last_ccr might be better? */
static unsigned short last_tar = 0;
/*---------------------------------------------------------------------------*/
interrupt(TIMERA1_VECTOR) timera1 (void) {
2007-05-22 22:59:11 +02:00
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if(TAIV == 2) {
/* HW timer bug fix: Interrupt handler called before TR==CCR.
* Occurrs when timer state is toggled between STOP and CONT. */
while(TACTL & MC1 && TACCR1 - TAR == 1);
/* Make sure interrupt time is future */
2008-01-08 09:01:41 +01:00
do {
TACCR1 += INTERVAL;
++count;
/* Make sure the CLOCK_CONF_SECOND is a power of two, to ensure
that the modulo operation below becomes a logical and and not
an expensive divide. Algorithm from Wikipedia:
http://en.wikipedia.org/wiki/Power_of_two */
#if (CLOCK_CONF_SECOND & (CLOCK_CONF_SECOND - 1)) != 0
#error CLOCK_CONF_SECOND must be a power of two (i.e., 1, 2, 4, 8, 16, 32, 64, ...).
#error Change CLOCK_CONF_SECOND in contiki-conf.h.
#endif
if(count % CLOCK_CONF_SECOND == 0) {
++seconds;
}
2008-01-08 09:01:41 +01:00
} while((TACCR1 - TAR) > INTERVAL);
last_tar = TAR;
if(etimer_pending() &&
(etimer_next_expiration_time() - count - 1) > MAX_TICKS) {
etimer_request_poll();
LPM4_EXIT;
}
}
/* if(process_nevents() >= 0) {
LPM4_EXIT;
}*/
2007-05-22 22:59:11 +02:00
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
clock_time_t
clock_time(void)
{
return count;
}
/*---------------------------------------------------------------------------*/
void
clock_set(clock_time_t clock, clock_time_t fclock)
{
TAR = fclock;
TACCR1 = fclock + INTERVAL;
count = clock;
}
/*---------------------------------------------------------------------------*/
int
clock_fine_max(void)
{
return INTERVAL;
}
/*---------------------------------------------------------------------------*/
unsigned short
clock_fine(void)
{
unsigned short t;
/* Assign last_tar to local varible that can not be changed by interrupt */
t = last_tar;
/* perform calc based on t, TAR will not be changed during interrupt */
return (unsigned short) (TAR - t);
}
/*---------------------------------------------------------------------------*/
void
clock_init(void)
{
dint();
/* Select SMCLK (2.4576MHz), clear TAR */
2007-04-02 18:32:20 +02:00
/* TACTL = TASSEL1 | TACLR | ID_3; */
2008-07-04 01:59:20 +02:00
/* Select ACLK 32768Hz clock, divide by 4 */
TACTL = TASSEL0 | TACLR | ID_2;
/* Initialize ccr1 to create the X ms interval. */
/* CCR1 interrupt enabled, interrupt occurs when timer equals CCR1. */
TACCTL1 = CCIE;
2007-04-02 18:32:20 +02:00
/* Interrupt after X ms. */
TACCR1 = INTERVAL;
/* Start Timer_A in continuous mode. */
TACTL |= MC1;
count = 0;
2007-04-02 18:32:20 +02:00
/* Enable interrupts. */
eint();
}
/*---------------------------------------------------------------------------*/
/**
* Delay the CPU for a multiple of 2.83 us.
*/
void
clock_delay(unsigned int i)
{
asm("add #-1, r15");
asm("jnz $-2");
/*
* This means that delay(i) will delay the CPU for CONST + 3x
* cycles. On a 2.4756 CPU, this means that each i adds 1.22us of
* delay.
*
* do {
* --i;
* } while(i > 0);
*/
}
/*---------------------------------------------------------------------------*/
/**
* Wait for a multiple of 10 ms.
*
*/
void
clock_wait(int i)
{
clock_time_t start;
start = clock_time();
while(clock_time() - start < (clock_time_t)i);
}
/*---------------------------------------------------------------------------*/
void
clock_set_seconds(unsigned long sec)
{
}
/*---------------------------------------------------------------------------*/
unsigned long
clock_seconds(void)
{
unsigned long t1, t2;
do {
t1 = seconds;
t2 = seconds;
} while(t1 != t2);
return t1;
}
/*---------------------------------------------------------------------------*/
rtimer_clock_t
clock_counter(void)
{
return TAR;
}
/*---------------------------------------------------------------------------*/