osd-contiki/platform/stm32nucleo-spirit1/spirit1.c

714 lines
22 KiB
C
Raw Permalink Normal View History

2015-10-09 19:40:39 +02:00
/*
* Copyright (c) 2012, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
*/
/*---------------------------------------------------------------------------*/
#include "spirit1.h"
#include "spirit1-arch.h"
#include "stm32l1xx.h"
#include "contiki.h"
#include "net/mac/frame802154.h"
#include "net/netstack.h"
#include "net/packetbuf.h"
#include "net/rime/rimestats.h"
#include "spirit1-arch.h"
#include <stdio.h>
#include "st-lib.h"
/*---------------------------------------------------------------------------*/
/* MGR extern st_lib_spirit_irqs st_lib_x_irq_status; */
extern volatile st_lib_spirit_flag_status rx_timeout;
/*---------------------------------------------------------------------------*/
#define XXX_ACK_WORKAROUND 1
/*---------------------------------------------------------------------------*/
#define DEBUG 0
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
#define BUSYWAIT_UNTIL(cond, max_time) \
do { \
rtimer_clock_t t0; \
t0 = RTIMER_NOW(); \
while(!(cond) && RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (max_time))) ; \
} while(0)
/*---------------------------------------------------------------------------*/
#define CLEAR_TXBUF() (spirit_txbuf[0] = 0)
#define CLEAR_RXBUF() (spirit_rxbuf[0] = 0)
#define IS_TXBUF_EMPTY() (spirit_txbuf[0] == 0)
#define IS_RXBUF_EMPTY() (spirit_rxbuf[0] == 0)
#define IS_RXBUF_FULL() (spirit_rxbuf[0] != 0)
/*---------------------------------------------------------------------------*/
/* transceiver state. */
#define ON 0
#define OFF 1
/*---------------------------------------------------------------------------*/
static volatile unsigned int spirit_on = OFF;
static volatile uint8_t receiving_packet = 0;
static packetbuf_attr_t last_rssi = 0; /* MGR */
static packetbuf_attr_t last_lqi = 0; /* MGR */
/*---------------------------------------------------------------------------*/
/*
* The buffers which hold incoming data.
* The +1 because of the first byte,
* which will contain the length of the packet.
*/
static uint8_t spirit_rxbuf[MAX_PACKET_LEN + 1];
static uint8_t spirit_txbuf[MAX_PACKET_LEN + 1 - SPIRIT_MAX_FIFO_LEN];
void st_lib_spirit_management_set_frequency_base(uint32_t);
/*---------------------------------------------------------------------------*/
static int just_got_an_ack = 0; /* Interrupt callback just detected an ack */
#if NULLRDC_CONF_802154_AUTOACK
#define ACK_LEN 3
static int wants_an_ack = 0; /* The packet sent expects an ack */
/* static int just_got_an_ack = 0; / * Interrupt callback just detected an ack * / */
/* #define ACKPRINTF printf */
#define ACKPRINTF(...)
#endif /* NULLRDC_CONF_802154_AUTOACK */
/*---------------------------------------------------------------------------*/
static int packet_is_prepared = 0;
/*---------------------------------------------------------------------------*/
PROCESS(spirit_radio_process, "SPIRIT radio driver");
/*---------------------------------------------------------------------------*/
static int spirit_radio_init(void);
static int spirit_radio_prepare(const void *payload, unsigned short payload_len);
static int spirit_radio_transmit(unsigned short payload_len);
static int spirit_radio_send(const void *data, unsigned short len);
static int spirit_radio_read(void *buf, unsigned short bufsize);
static int spirit_radio_channel_clear(void);
static int spirit_radio_receiving_packet(void);
static int spirit_radio_pending_packet(void);
static int spirit_radio_on(void);
static int spirit_radio_off(void);
/*---------------------------------------------------------------------------*/
const struct radio_driver spirit_radio_driver =
{
spirit_radio_init,
spirit_radio_prepare,
spirit_radio_transmit,
spirit_radio_send,
spirit_radio_read,
spirit_radio_channel_clear,
spirit_radio_receiving_packet,
spirit_radio_pending_packet,
spirit_radio_on,
spirit_radio_off,
};
/*---------------------------------------------------------------------------*/
void
spirit1_printstatus(void)
{
int s = SPIRIT1_STATUS();
if(s == SPIRIT1_STATE_STANDBY) {
printf("spirit1: SPIRIT1_STATE_STANDBY\n");
} else if(s == SPIRIT1_STATE_READY) {
printf("spirit1: SPIRIT1_STATE_READY\n");
} else if(s == SPIRIT1_STATE_TX) {
printf("spirit1: SPIRIT1_STATE_TX\n");
} else if(s == SPIRIT1_STATE_RX) {
printf("spirit1: SPIRIT1_STATE_RX\n");
} else {
printf("spirit1: status: %d\n", s);
}
}
/*---------------------------------------------------------------------------*/
/* Strobe a command. The rationale for this is to clean up the messy legacy code. */
static void
spirit1_strobe(uint8_t s)
{
st_lib_spirit_cmd_strobe_command(s);
}
/*---------------------------------------------------------------------------*/
void
spirit_set_ready_state(void)
{
PRINTF("READY IN\n");
st_lib_spirit_irq_clear_status();
IRQ_DISABLE();
if(SPIRIT1_STATUS() == SPIRIT1_STATE_STANDBY) {
spirit1_strobe(SPIRIT1_STROBE_READY);
} else if(SPIRIT1_STATUS() == SPIRIT1_STATE_RX) {
spirit1_strobe(SPIRIT1_STROBE_SABORT);
st_lib_spirit_irq_clear_status();
}
IRQ_ENABLE();
PRINTF("READY OUT\n");
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_init(void)
{
PRINTF("RADIO INIT IN\n");
st_lib_spirit_spi_init();
/* Configure radio shut-down (SDN) pin and activate radio */
st_lib_radio_gpio_init(RADIO_GPIO_SDN, RADIO_MODE_GPIO_OUT);
/* Configures the SPIRIT1 library */
st_lib_spirit_radio_set_xtal_frequency(XTAL_FREQUENCY);
st_lib_spirit_management_set_frequency_base(XTAL_FREQUENCY);
/* wake up to READY state */
/* weirdly enough, this *should* actually *set* the pin, not clear it! The pins is declared as GPIO_pin13 == 0x2000 */
RADIO_GPIO_SDN_PORT->BSRR = RADIO_GPIO_SDN_PIN;
st_lib_hal_gpio_write_pin(RADIO_GPIO_SDN_PORT, RADIO_GPIO_SDN_PIN, GPIO_PIN_RESET);
/* wait minimum 1.5 ms to allow SPIRIT1 a proper boot-up sequence */
BUSYWAIT_UNTIL(0, 3 * RTIMER_SECOND / 2000);
/* Soft reset of core */
spirit1_strobe(SPIRIT1_STROBE_SRES);
/* Configures the SPIRIT1 radio part */
st_lib_s_radio_init x_radio_init = {
/* XTAL_FREQUENCY, */
XTAL_OFFSET_PPM,
BASE_FREQUENCY,
CHANNEL_SPACE,
CHANNEL_NUMBER,
MODULATION_SELECT,
DATARATE,
FREQ_DEVIATION,
BANDWIDTH
};
st_lib_spirit_radio_init(&x_radio_init);
st_lib_spirit_radio_set_xtal_frequency(XTAL_FREQUENCY);
st_lib_spirit_radio_set_pa_level_dbm(0, POWER_DBM);
st_lib_spirit_radio_set_pa_level_max_index(0);
/* Configures the SPIRIT1 packet handler part*/
st_lib_pkt_basic_init x_basic_init = {
PREAMBLE_LENGTH,
SYNC_LENGTH,
SYNC_WORD,
LENGTH_TYPE,
LENGTH_WIDTH,
CRC_MODE,
CONTROL_LENGTH,
EN_ADDRESS,
EN_FEC,
EN_WHITENING
};
st_lib_spirit_pkt_basic_init(&x_basic_init);
/* Enable the following interrupt sources, routed to GPIO */
st_lib_spirit_irq_de_init(NULL);
st_lib_spirit_irq_clear_status();
st_lib_spirit_irq(TX_DATA_SENT, S_ENABLE);
st_lib_spirit_irq(RX_DATA_READY, S_ENABLE);
st_lib_spirit_irq(VALID_SYNC, S_ENABLE);
st_lib_spirit_irq(RX_DATA_DISC, S_ENABLE);
st_lib_spirit_irq(TX_FIFO_ERROR, S_ENABLE);
st_lib_spirit_irq(RX_FIFO_ERROR, S_ENABLE);
/* Configure Spirit1 */
st_lib_spirit_radio_persisten_rx(S_ENABLE);
st_lib_spirit_qi_set_sqi_threshold(SQI_TH_0);
st_lib_spirit_qi_sqi_check(S_ENABLE);
st_lib_spirit_qi_set_rssi_threshold_dbm(CCA_THRESHOLD);
st_lib_spirit_timer_set_rx_timeout_stop_condition(SQI_ABOVE_THRESHOLD);
SET_INFINITE_RX_TIMEOUT();
st_lib_spirit_radio_afc_freeze_on_sync(S_ENABLE);
/* Puts the SPIRIT1 in STANDBY mode (125us -> rx/tx) */
spirit1_strobe(SPIRIT1_STROBE_STANDBY);
spirit_on = OFF;
CLEAR_RXBUF();
CLEAR_TXBUF();
/* Initializes the mcu pin as input, used for IRQ */
st_lib_radio_gpio_init(RADIO_GPIO_IRQ, RADIO_MODE_EXTI_IN);
/* Configure the radio to route the IRQ signal to its GPIO 3 */
st_lib_spirit_gpio_init(&(st_lib_s_gpio_init){SPIRIT_GPIO_IRQ, SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP, SPIRIT_GPIO_DIG_OUT_IRQ });
process_start(&spirit_radio_process, NULL);
PRINTF("Spirit1 init done\n");
return 0;
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_prepare(const void *payload, unsigned short payload_len)
{
PRINTF("Spirit1: prep %u\n", payload_len);
packet_is_prepared = 0;
/* Checks if the payload length is supported */
if(payload_len > MAX_PACKET_LEN) {
return RADIO_TX_ERR;
}
/* Should we delay for an ack? */
#if NULLRDC_CONF_802154_AUTOACK
frame802154_t info154;
wants_an_ack = 0;
if(payload_len > ACK_LEN
&& frame802154_parse((char *)payload, payload_len, &info154) != 0) {
if(info154.fcf.frame_type == FRAME802154_DATAFRAME
&& info154.fcf.ack_required != 0) {
wants_an_ack = 1;
}
}
#endif /* NULLRDC_CONF_802154_AUTOACK */
/* Sets the length of the packet to send */
IRQ_DISABLE();
spirit1_strobe(SPIRIT1_STROBE_FTX);
st_lib_spirit_pkt_basic_set_payload_length(payload_len);
st_lib_spirit_spi_write_linear_fifo(payload_len, (uint8_t *)payload);
IRQ_ENABLE();
PRINTF("PREPARE OUT\n");
packet_is_prepared = 1;
return RADIO_TX_OK;
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_transmit(unsigned short payload_len)
{
/* This function blocks until the packet has been transmitted */
rtimer_clock_t rtimer_txdone, rtimer_rxack;
PRINTF("TRANSMIT IN\n");
if(!packet_is_prepared) {
return RADIO_TX_ERR;
}
/* Stores the length of the packet to send */
/* Others spirit_radio_prepare will be in hold */
spirit_txbuf[0] = payload_len;
/* Puts the SPIRIT1 in TX state */
receiving_packet = 0;
spirit_set_ready_state();
spirit1_strobe(SPIRIT1_STROBE_TX);
just_got_an_ack = 0;
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_TX, 1 * RTIMER_SECOND / 1000);
/* BUSYWAIT_UNTIL(SPIRIT1_STATUS() != SPIRIT1_STATE_TX, 4 * RTIMER_SECOND/1000); //For GFSK with high data rate */
BUSYWAIT_UNTIL(SPIRIT1_STATUS() != SPIRIT1_STATE_TX, 50 * RTIMER_SECOND / 1000); /* For FSK with low data rate */
/* Reset radio - needed for immediate RX of ack */
CLEAR_TXBUF();
CLEAR_RXBUF();
IRQ_DISABLE();
st_lib_spirit_irq_clear_status();
spirit1_strobe(SPIRIT1_STROBE_SABORT);
BUSYWAIT_UNTIL(0, RTIMER_SECOND / 2500);
spirit1_strobe(SPIRIT1_STROBE_READY);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_READY, 1 * RTIMER_SECOND / 1000);
spirit1_strobe(SPIRIT1_STROBE_RX);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_RX, 1 * RTIMER_SECOND / 1000);
IRQ_ENABLE();
#if XXX_ACK_WORKAROUND
just_got_an_ack = 1;
#endif /* XXX_ACK_WORKAROUND */
#if NULLRDC_CONF_802154_AUTOACK
if(wants_an_ack) {
rtimer_txdone = RTIMER_NOW();
BUSYWAIT_UNTIL(just_got_an_ack, 2 * RTIMER_SECOND / 1000);
rtimer_rxack = RTIMER_NOW();
if(just_got_an_ack) {
ACKPRINTF("debug_ack: ack received after %u/%u ticks\n",
(uint32_t)(rtimer_rxack - rtimer_txdone), 2 * RTIMER_SECOND / 1000);
} else {
ACKPRINTF("debug_ack: no ack received\n");
}
}
#endif /* NULLRDC_CONF_802154_AUTOACK */
PRINTF("TRANSMIT OUT\n");
CLEAR_TXBUF();
packet_is_prepared = 0;
clock_wait(1);
return RADIO_TX_OK;
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_send(const void *payload, unsigned short payload_len)
{
if(spirit_radio_prepare(payload, payload_len) == RADIO_TX_ERR) {
return RADIO_TX_ERR;
}
return spirit_radio_transmit(payload_len);
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_read(void *buf, unsigned short bufsize)
{
PRINTF("READ IN\n");
/* Checks if the RX buffer is empty */
if(IS_RXBUF_EMPTY()) {
IRQ_DISABLE();
CLEAR_RXBUF();
spirit1_strobe(SPIRIT1_STROBE_SABORT);
BUSYWAIT_UNTIL(0, RTIMER_SECOND / 2500);
spirit1_strobe(SPIRIT1_STROBE_READY);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_READY, 1 * RTIMER_SECOND / 1000);
spirit1_strobe(SPIRIT1_STROBE_RX);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_RX, 1 * RTIMER_SECOND / 1000);
PRINTF("READ OUT RX BUF EMPTY\n");
IRQ_ENABLE();
return 0;
}
if(bufsize < spirit_rxbuf[0]) {
/* If buf has the correct size */
PRINTF("TOO SMALL BUF\n");
return 0;
} else {
/* Copies the packet received */
memcpy(buf, spirit_rxbuf + 1, spirit_rxbuf[0]);
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, last_rssi); /* MGR */
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, last_lqi); /* MGR */
bufsize = spirit_rxbuf[0];
CLEAR_RXBUF();
PRINTF("READ OUT\n");
return bufsize;
}
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_channel_clear(void)
{
float rssi_value;
/* Local variable used to memorize the SPIRIT1 state */
uint8_t spirit_state = ON;
PRINTF("CHANNEL CLEAR IN\n");
if(spirit_on == OFF) {
/* Wakes up the SPIRIT1 */
spirit_radio_on();
spirit_state = OFF;
}
/* */
IRQ_DISABLE();
spirit1_strobe(SPIRIT1_STROBE_SABORT);
/* SpiritCmdStrobeSabort();*/
st_lib_spirit_irq_clear_status();
IRQ_ENABLE();
{
rtimer_clock_t timeout = RTIMER_NOW() + 5 * RTIMER_SECOND / 1000;
do {
st_lib_spirit_refresh_status();
} while((st_lib_g_x_status.MC_STATE != MC_STATE_READY) && (RTIMER_NOW() < timeout));
if(RTIMER_NOW() < timeout) {
return 1;
}
}
/* Stores the RSSI value */
rssi_value = st_lib_spirit_qi_get_rssi_dbm();
/* Puts the SPIRIT1 in its previous state */
if(spirit_state == OFF) {
spirit_radio_off();
} else {
spirit1_strobe(SPIRIT1_STROBE_RX);
/* SpiritCmdStrobeRx();*/
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_RX, 5 * RTIMER_SECOND / 1000);
}
PRINTF("CHANNEL CLEAR OUT\n");
/* Checks the RSSI value with the threshold */
if(rssi_value < CCA_THRESHOLD) {
return 0;
} else {
return 1;
}
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_receiving_packet(void)
{
return receiving_packet;
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_pending_packet(void)
{
PRINTF("PENDING PACKET\n");
return !IS_RXBUF_EMPTY();
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_off(void)
{
PRINTF("Spirit1: ->off\n");
if(spirit_on == ON) {
/* Disables the mcu to get IRQ from the SPIRIT1 */
IRQ_DISABLE();
/* first stop rx/tx */
spirit1_strobe(SPIRIT1_STROBE_SABORT);
/* Clear any pending irqs */
st_lib_spirit_irq_clear_status();
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_READY, 5 * RTIMER_SECOND / 1000);
if(SPIRIT1_STATUS() != SPIRIT1_STATE_READY) {
PRINTF("Spirit1: failed off->ready\n");
return 1;
}
/* Puts the SPIRIT1 in STANDBY */
spirit1_strobe(SPIRIT1_STROBE_STANDBY);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_STANDBY, 5 * RTIMER_SECOND / 1000);
if(SPIRIT1_STATUS() != SPIRIT1_STATE_STANDBY) {
PRINTF("Spirit1: failed off->stdby\n");
return 1;
}
spirit_on = OFF;
CLEAR_TXBUF();
CLEAR_RXBUF();
}
PRINTF("Spirit1: off.\n");
return 0;
}
/*---------------------------------------------------------------------------*/
static int
spirit_radio_on(void)
{
PRINTF("Spirit1: on\n");
spirit1_strobe(SPIRIT1_STROBE_SABORT);
BUSYWAIT_UNTIL(0, RTIMER_SECOND / 2500);
if(spirit_on == OFF) {
IRQ_DISABLE();
/* ensure we are in READY state as we go from there to Rx */
spirit1_strobe(SPIRIT1_STROBE_READY);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_READY, 5 * RTIMER_SECOND / 1000);
if(SPIRIT1_STATUS() != SPIRIT1_STATE_READY) {
PRINTF("Spirit1: failed to turn on\n");
while(1) ;
/* return 1; */
}
/* now we go to Rx */
spirit1_strobe(SPIRIT1_STROBE_RX);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_RX, 5 * RTIMER_SECOND / 1000);
if(SPIRIT1_STATUS() != SPIRIT1_STATE_RX) {
PRINTF("Spirit1: failed to enter rx\n");
while(1) ;
/* return 1; */
}
/* Enables the mcu to get IRQ from the SPIRIT1 */
IRQ_ENABLE();
spirit_on = ON;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int interrupt_callback_in_progress = 0;
static int interrupt_callback_wants_poll = 0;
PROCESS_THREAD(spirit_radio_process, ev, data)
{
PROCESS_BEGIN();
PRINTF("Spirit1: process started\n");
while(1) {
int len;
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
PRINTF("Spirit1: polled\n");
packetbuf_clear();
len = spirit_radio_read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
#if NULLRDC_CONF_802154_AUTOACK
/* Check if the packet has an ACK request */
frame802154_t info154;
if(len > ACK_LEN &&
frame802154_parse((char *)packetbuf_dataptr(), len, &info154) != 0) {
if(info154.fcf.frame_type == FRAME802154_DATAFRAME &&
info154.fcf.ack_required != 0 &&
linkaddr_cmp((linkaddr_t *)&info154.dest_addr,
&linkaddr_node_addr)) {
#if !XXX_ACK_WORKAROUND
/* Send an ACK packet */
uint8_t ack_frame[ACK_LEN] = {
FRAME802154_ACKFRAME,
0x00,
info154.seq
};
IRQ_DISABLE();
spirit1_strobe(SPIRIT1_STROBE_FTX);
st_lib_spirit_pkt_basic_set_payload_length((uint16_t)ACK_LEN);
st_lib_spirit_spi_write_linear_fifo((uint16_t)ACK_LEN, (uint8_t *)ack_frame);
spirit_set_ready_state();
IRQ_ENABLE();
spirit1_strobe(SPIRIT1_STROBE_TX);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_TX, 1 * RTIMER_SECOND / 1000);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() != SPIRIT1_STATE_TX, 1 * RTIMER_SECOND / 1000);
ACKPRINTF("debug_ack: sent ack %d\n", ack_frame[2]);
#endif /* !XXX_ACK_WORKAROUND */
}
}
#endif /* NULLRDC_CONF_802154_AUTOACK */
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
if(!IS_RXBUF_EMPTY()) {
process_poll(&spirit_radio_process);
}
if(interrupt_callback_wants_poll) {
spirit1_interrupt_callback();
if(SPIRIT1_STATUS() == SPIRIT1_STATE_READY) {
spirit1_strobe(SPIRIT1_STROBE_RX);
BUSYWAIT_UNTIL(SPIRIT1_STATUS() == SPIRIT1_STATE_RX, 1 * RTIMER_SECOND / 1000);
}
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
void
spirit1_interrupt_callback(void)
{
#define INTPRINTF(...) /* PRINTF */
st_lib_spirit_irqs x_irq_status;
if(spirit_spi_busy() || interrupt_callback_in_progress) {
process_poll(&spirit_radio_process);
interrupt_callback_wants_poll = 1;
return;
}
interrupt_callback_wants_poll = 0;
interrupt_callback_in_progress = 1;
/* get interrupt source from radio */
st_lib_spirit_irq_get_status(&x_irq_status);
st_lib_spirit_irq_clear_status();
if(x_irq_status.IRQ_RX_FIFO_ERROR) {
receiving_packet = 0;
interrupt_callback_in_progress = 0;
spirit1_strobe(SPIRIT1_STROBE_FRX);
return;
}
if(x_irq_status.IRQ_TX_FIFO_ERROR) {
receiving_packet = 0;
interrupt_callback_in_progress = 0;
spirit1_strobe(SPIRIT1_STROBE_FTX);
return;
}
/* The IRQ_VALID_SYNC is used to notify a new packet is coming */
if(x_irq_status.IRQ_VALID_SYNC) {
INTPRINTF("SYNC\n");
receiving_packet = 1;
}
/* The IRQ_TX_DATA_SENT notifies the packet received. Puts the SPIRIT1 in RX */
if(x_irq_status.IRQ_TX_DATA_SENT) {
spirit1_strobe(SPIRIT1_STROBE_RX);
/* SpiritCmdStrobeRx();*/
INTPRINTF("SENT\n");
CLEAR_TXBUF();
interrupt_callback_in_progress = 0;
return;
}
/* The IRQ_RX_DATA_READY notifies a new packet arrived */
if(x_irq_status.IRQ_RX_DATA_READY) {
st_lib_spirit_spi_read_linear_fifo(st_lib_spirit_linear_fifo_read_num_elements_rx_fifo(),
&spirit_rxbuf[1]);
spirit_rxbuf[0] = st_lib_spirit_pkt_basic_get_received_pkt_length();
spirit1_strobe(SPIRIT1_STROBE_FRX);
INTPRINTF("RECEIVED\n");
process_poll(&spirit_radio_process);
last_rssi = (packetbuf_attr_t)st_lib_spirit_qi_get_rssi(); /* MGR */
last_lqi = (packetbuf_attr_t)st_lib_spirit_qi_get_lqi(); /* MGR */
receiving_packet = 0;
#if NULLRDC_CONF_802154_AUTOACK
if(spirit_rxbuf[0] == ACK_LEN) {
/* For debugging purposes we assume this is an ack for us */
just_got_an_ack = 1;
}
#endif /* NULLRDC_CONF_802154_AUTOACK */
interrupt_callback_in_progress = 0;
return;
}
if(x_irq_status.IRQ_RX_DATA_DISC) {
/* RX command - to ensure the device will be ready for the next reception */
if(x_irq_status.IRQ_RX_TIMEOUT) {
st_lib_spirit_cmd_strobe_flush_rx_fifo();
rx_timeout = SET;
}
}
interrupt_callback_in_progress = 0;
}
/*---------------------------------------------------------------------------*/