deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/examples/osd/ico-wallclock-time/icosoc.cfg

46 lines
854 B
INI
Raw Permalink Normal View History

Changes for new icoboard We now have more memory, so no need to compile for flash.
2016-06-30 12:57:32 +02:00
# Board
board icoboard_gamma
Add noflashboot to config file Don't load application from flash after timeout, makes it work for long ssh connection times when the raspi has no DNS and produces DNS timeouts too long for the bootloader. Note that this needs a new icosoc (at the time of this commit).
2016-09-29 18:41:47 +02:00
# Don't load application from flash after timeout, makes it work for
# long ssh connection times
noflashboot
Start implementing timer
2016-04-15 09:54:44 +02:00
# enable compressed ISA support
compressed_isa
Changes for new icoboard We now have more memory, so no need to compile for flash.
2016-06-30 12:57:32 +02:00
# (don't) enable code in flash
#flashpmem
Working wallclock example .. and cron probably would work if we had something to switch on/off for testing.
2016-05-13 16:01:10 +02:00
Initial PicoRV32 target
2016-03-31 12:47:05 +02:00
# Digilent PmodUSBUART on PMOD3
# http://store.digilentinc.com/pmodusbuart-usb-to-uart-interface/
mod rs232 ser0
address 1
param BAUD_RATE 115200
connect rx pmod3_3
connect tx pmod3_2
First implementation of cc2520 radio Can write and read memory of radio chip. No communication with merkur-board so far.
2016-05-08 16:49:54 +02:00
# Texas cc2520 RF module connected via SPI
mod spi cc2520_spi
Initial PicoRV32 target
2016-03-31 12:47:05 +02:00
address 2
First implementation of cc2520 radio Can write and read memory of radio chip. No communication with merkur-board so far.
2016-05-08 16:49:54 +02:00
connect CS pmod1_1
connect miso pmod1_3
connect mosi pmod1_2
connect sclk pmod1_4
mod extirq cc2520_fifop
address 3
interrupt 3
connect pin pmod1_7
Working ping Biggest problem was definitions in rtimer_arch.h -- we have a 16-bit rtimer_clock_t so this was overflowing and not working. Therefore most delays in the radio implementation didn't work.
2016-05-12 13:51:20 +02:00
# pmod1_10 sfd
First implementation of cc2520 radio Can write and read memory of radio chip. No communication with merkur-board so far.
2016-05-08 16:49:54 +02:00
mod extirq cc2520_sfd
address 4
interrupt 4
Working ping Biggest problem was definitions in rtimer_arch.h -- we have a 16-bit rtimer_clock_t so this was overflowing and not working. Therefore most delays in the radio implementation didn't work.
2016-05-12 13:51:20 +02:00
connect pin pmod1_10
Initial PicoRV32 target
2016-03-31 12:47:05 +02:00
First implementation of cc2520 radio Can write and read memory of radio chip. No communication with merkur-board so far.
2016-05-08 16:49:54 +02:00
# pmod1_8 Reset: *Output*
Working ping Biggest problem was definitions in rtimer_arch.h -- we have a 16-bit rtimer_clock_t so this was overflowing and not working. Therefore most delays in the radio implementation didn't work.
2016-05-12 13:51:20 +02:00
# pmod1_9 cca
First implementation of cc2520 radio Can write and read memory of radio chip. No communication with merkur-board so far.
2016-05-08 16:49:54 +02:00
mod gpio cc2520_io
address 5
Working ping Biggest problem was definitions in rtimer_arch.h -- we have a 16-bit rtimer_clock_t so this was overflowing and not working. Therefore most delays in the radio implementation didn't work.
2016-05-12 13:51:20 +02:00
connect IO pmod1_9 pmod1_8
Reference in a new issue Copy permalink