gitolite/doc/3-faq-tips-etc.mkd

520 lines
21 KiB
Markdown

# assorted faqs, tips, and notes on gitolite
In this document:
* <a href="#_common_errors_and_mistakes">common errors and mistakes</a>
* <a href="#_other_errors_warnings_notes_">other errors, warnings, notes...</a>
* <a href="#_cloning_an_empty_repo">cloning an empty repo</a>
* <a href="#_all_syntax_for_repos">`@all` syntax for repos</a>
* <a href="#_features">features</a>
* <a href="#_syntax_and_normal_usage">syntax and normal usage</a>
* <a href="#_one_user_many_keys">one user, many keys</a>
* <a href="#_security_access_control_and_auditing">security, access control, and auditing</a>
* <a href="#_two_levels_of_access_rights_checking">two levels of access rights checking</a>
* <a href="#_better_logging">better logging</a>
* <a href="#_delegating_parts_of_the_config_file">delegating parts of the config file</a>
* <a href="#_convenience_features">convenience features</a>
* <a href="#_what_repos_do_I_have_access_to_">what repos do I have access to?</a>
* <a href="#_support_for_git_installed_outside_default_PATH">support for git installed outside default PATH</a>
* <a href="#_personal_branches">"personal" branches</a>
* <a href="#_custom_hooks_and_custom_git_config">custom hooks and custom git config</a>
* <a href="#_bypassing_gitolite">bypassing gitolite</a>
* <a href="#_disabling_write_access_to_take_backups">disabling write access to take backups</a>
* <a href="#_INconvenience_features">INconvenience features</a>
* <a href="#_deleting_a_repo">deleting a repo</a>
* <a href="#_helping_with_gitweb">helping with gitweb</a>
* <a href="#_easier_to_link_gitweb_authorisation_with_gitolite">easier to link gitweb authorisation with gitolite</a>
* <a href="#_umask_setting">umask setting</a>
* <a href="#_advanced_features">advanced features</a>
* <a href="#_repos_named_with_wildcards">repos named with wildcards</a>
* <a href="#_admin_defined_commands">admin defined commands</a>
* <a href="#_access_control_for_external_commands">access control for external commands</a>
* <a href="#_svnserve">svnserve</a>
* <a href="#_design_choices">design choices</a>
* <a href="#_keeping_the_parser_and_the_access_control_separate">keeping the parser and the access control separate</a>
----
<a name="_common_errors_and_mistakes"></a>
### common errors and mistakes
* adding `repositories/` at the start of the repo name in the `git clone`.
This error is typically made by the *admin* himself -- because he knows
what `$REPO_BASE` is set to and thinks he has to provide that prefix on
the client side also :-) In fact gitolite prepends `$REPO_BASE`
internally, so you shouldn't also do the same thing!
* being able to clone but getting errors on push. Most likely caused by a
combination of:
* you already have shell access to the server, not just "gitolite"
access, *and*
* you cloned using `git clone git@server:repositories/repo.git` (notice
there's an extra "repositories/" in there?)
In other words, you used a key that completely bypassed gitolite and went
straight to the shell to do the clone.
Please see doc/ssh-troubleshooting.mkd for what all this means.
<a name="_other_errors_warnings_notes_"></a>
### other errors, warnings, notes...
<a name="_cloning_an_empty_repo"></a>
#### cloning an empty repo
Cloning an empty repo is only possible with clients greater than 1.6.2. So at
least one of your clients needs to have a recent git. Once at least one
commit has been made, older clients can also use it
When you clone an empty repo, git seems to complain about `fatal: The remote
end hung up unexpectedly`. However, you can ignore this, since it doesn't
seem to hurt anything. [Update 2009-09-14; this has been fixed in git
1.6.4.3]
<a name="_all_syntax_for_repos"></a>
#### `@all` syntax for repos
There *is* a way to use the `@all` syntax for repos also, as described in
`doc/gitolite.conf.mkd`. However, there are a couple of minor cautions:
* don't use `NAME/` or such restrictions on the special `@all` repo. Due to
the potential for defeating a crucial optimisation and slowing down *all*
access, we do not support this.
<a name="_features"></a>
### features
Apart from the big ones listed in the top level README, and subjective ones
like "better config file format", gitolite has evolved to have many useful
features than the original goal of branch-level access control.
<a name="_syntax_and_normal_usage"></a>
#### syntax and normal usage
<a name="multikeys"></a>
<a name="_one_user_many_keys"></a>
##### one user, many keys
I have a laptop and a desktop I need to access the server from. I have
different private keys on them, but as far as gitolite is concerned both of
them should be treated as "sitaram". How does this work?
The way it works is that you copy one pubkey as "sitaram@laptop.pub" and the
other as "sitaram@desktop.pub". The part before the "@" is the username, so
gitolite knows these two keys belong to the same person. The part after the
"@" can be anything you like, of course; gitolite doesn't care.
Note that you don't say "sitaram@laptop" and so on in the **config** file --
as far as the config file is concerned there's just **one** user called
"sitaram" -- so you only say "sitaram" there.
I think this is easier to maintain if you have to delete or change one of
those keys.
However, now that `sitaramc@gmail.com` is also a valid username, we need to
distinguish between `sitaramc@gmail.com.pub` and `sitaramc@desktop.pub`. We
do that by requiring that the multi-key suffix you use (like "desktop" and
"laptop") should not have a `"."` in it. If it does, it looks like an email
address. The following table lists sample pubkey filenames and the
corresponding derived usernames (which is what goes into the
`conf/gitolite.conf` file):
* old style multikeys; not mistaken for emails because there is no "." in
hostname part
sitaramc.pub sitaramc
sitaramc@laptop.pub sitaramc
sitaramc@desktop.pub sitaramc
* new style, email keys; there is a "." in hostname part; so it's an email
address
sitaramc@gmail.com.pub sitaramc@gmail.com
* multikeys *with* email address
sitaramc@gmail.com@laptop.pub sitaramc@gmail.com
sitaramc@gmail.com@desktop.pub sitaramc@gmail.com
<a name="_security_access_control_and_auditing"></a>
#### security, access control, and auditing
<a name="_two_levels_of_access_rights_checking"></a>
##### two levels of access rights checking
Gitolite has two levels of access checks. The **first check** is what I will
call the **pre-git** level. At this stage, the `gl-auth-command` has been
invoked by `sshd`, and it knows just three things:
* who,
* what repository, and
* what type of access (R or W)
Note that at this point no git program has entered the picture, and we have no
way of knowing what **ref** (branch, tag, etc) he is trying to update, even if
it is a "write" operation.
For a "read" operation to pass this check, the username (or `@all`) must have
read permission (i.e., R, RW, or RW+) on at least one branch of the repo.
For a "write" operation, there is an additional restriction: lines specifying
only `R` (read access) don't count. *The user must have write access to
**some** ref in the repo in order to pass this stage!*
The **second check** is via a git `update hook`. This check only happens for
write operations. By this time we know what "ref" he is trying to update, as
well as the old and the new SHAs of that ref (by which we can also deduce
whether it's a rewind or not). This is where the "per-branch" permissions
come into play.
Each refex that allows `W` access (or `+` if this is a rewind) for *this*
user, on *this* repo, is matched against the actual refname being updated. If
any of the refexes match, the push succeeds. If none of them match, it fails.
Gitolite also allows "exclude" or "deny" rules. See later in this document
for details.
<a name="_better_logging"></a>
##### better logging
If you have been too liberal with the permission to rewind, it has built-in
logging as an emergency fallback if someone goes too far, or for audit
purposes [`*`]. The logfile names and location are configurable, and can
include the year/month/day etc in the filename for easy archival or further
processing. The log file even tells you which pattern in the config file
matched to allow that specific access to proceed.
> [`*`] setting `core.logAllRefUpdates true` does provide a safety net
> against over-zealous rewinds, but it does not tell you "who". And
> strangely, management does not seem to share the view that "blame" is just
> a synonym for "annotate" ;-)]
The log lines look like this:
2009-09-19.10:24:37 + b4e76569659939 4fb16f2a88d8b5 myrepo refs/heads/master user2 refs/heads/master
The "+" at the start indicates a non-fast forward update, in this case from
b4e76569659939 to 4fb16f2a88d8b5. So b4e76569659939 is the one to restore!
Can it get easier?
The other parts of the log line are the name of the repo, the refname being
updated, the user updating it, and the refex pattern (from the config file)
that matched, in case you need to debug the config file itself.
<a name="_delegating_parts_of_the_config_file"></a>
##### delegating parts of the config file
You can now split up the config file and delegate the authority to specify
access control for their own pieces. See [delegation][] for details.
<a name="_convenience_features"></a>
#### convenience features
<a name="_what_repos_do_I_have_access_to_"></a>
##### what repos do I have access to?
Sometimes there are too many repos, maybe even named similarly, or with the
potential for typos, confusion about hyphens/underscores or upper/lower case,
etc. You'd just like a simple way to know what repos you have access to.
Gitolite provides two commands (`info` and `expand`) to help you find this
information; please check [doc/report-output.mkd][repout] for details.
<a name="_support_for_git_installed_outside_default_PATH"></a>
##### support for git installed outside default PATH
The normal solution is to add to the system default PATH somehow, either by
munging `/etc/profile` or by enabling `PermitUserEnvironment` in
`/etc/ssh/sshd_config` and then setting the PATH in `~/.ssh/.environment`.
All these are security risks because they allow a lot more than just you and
your git install :-)
And if you don't have root, you can't do this anyway.
The only solution till now has been to ask every client to set the config
parameters `remote.<name>.receivepack` and `remote.<name>.uploadpack`. But
telling *every* client to do so is a pain...
Gitolite lets you specify the directory in which git binaries are to be found,
via a new variable (`$GIT_PATH`) in the "rc" file. If this variable is
non-empty, it will be appended to the PATH environment variable before
attempting to run git stuff.
Very easy, very simple, and completely transparent to the users :-)
**Note**: sometimes you have a system that already has an older "git"
installed in one of the system PATHs, but you've installed a newer git in some
non-standard location and want that picked up. Because of security reasons,
gitolite will not prepend `GIT_PATH` to the PATH variable, so the older git
comes first and it gets kinda frustrating!
Here's a simple workaround. Ignore the `GIT_PATH` variable, and directly set
the full PATH in the rc file, like so:
$ENV{PATH} = "/home/sitaram/bin:$ENV{PATH}";
<a name="_personal_branches"></a>
##### "personal" branches
"personal" branches are great for corporate environments, where
unauthenticated pull/clone is a no-no. Since a dev workstation cannot do
authentication, even work shared just between 2 devs has to go *via* the
server. This causes the same branch name clutter as in a centralised VCS,
plus setting up permissions for this becomes a chore for the admin.
gitolite lets you define a "personal" or "scratch" namespace prefix for each
developer (e.g., `refs/personal/<devname>/*`). Just add a line like:
RW+ personal/USER/ = @userlist
This means I (user "sitaram") can do anything to any branch whose name starts
with `personal/sitaram/` assuming I'm in "userlist".
You can have any number of such lines with different prefixes (for example,
using topic names instead of "personal") or even suffixes if you like. The
important thing is that the "branch" name should contain `/USER/` (including
the slashes). At runtime this will match whoever is the current user. Access
is still determined by the right hand side of course.
<a name="_custom_hooks_and_custom_git_config"></a>
##### custom hooks and custom git config
You can specify hooks that you want to propagate to all repos, as well as
per-repo "gitconfig" settings. Please see `doc/2-admin.mkd` and
`doc/gitolite.conf.mkd` for details.
<a name="_bypassing_gitolite"></a>
##### bypassing gitolite
Sometimes you'll need to access one of the gitolite-managed repos directly on
the server, without going through gitolite. Reasons may be some automatic
updates or some other ad hoc purposes you can dream up.
Cloning a gitolite-controlled repo is easy enough -- just use the full path
(typically `~/repositories/reponame.git`) instead of just `reponame`, to
compensate for gitolite not sitting in between and adding those things to the
repo path.
But when you push, the update hook (which git will invoke anyway) will fail
because it needs all sorts of access control info that it now doesn't have,
because the push was invoked without going through gitolite.
In order to bypass the update hook, just set the `GL_BYPASS_UPDATE_HOOK`
environment variable to "1" or something, export it, and push. I prefer not
to set that variable permanently, preferring this mode instead:
GL_BYPASS_UPDATE_HOOK=1 git push
**WARNING**: Do **NOT** try this with the special `gitolite-admin` repo. That
repo also runs a `post-update` hook which needs additional information which
is NOT available if you bypass gitolite. Mucking with that repo in this
manner is strongly discouraged, as in "are you feeling lucky today?". Use
`gl-dont-panic` if you need to do some server-side surgery for that repo.
<a name="_disabling_write_access_to_take_backups"></a>
##### disabling write access to take backups
If you want to take normal, OS-level, backups of the system, you might want
git to be quiescent during that time, so that the backup is clean. The best
way to do this is to disable write-access to the server for the duration of
the backup.
Here's how:
cd $HOME # if running as "git" user, else "cd ~git" or whatever
echo writes disabled during backup window > .gitolite.down
# << RUN YOUR BACKUP COMMAND(s) HERE >>
rm .gitolite.down
I leave it to you to
* make sure that if the backup script fails, the `.gitolite.down` file is
still removed (or not; maybe your policy is that if the backup failed, no
further writes are allowed. Whatever...)
* if you're extremely paranoid (even I wouldn't worry about this!) make sure
that no push is *in progress* by checking for any `git-receive-pack`
processes in a `ps` output.
<a name="_INconvenience_features"></a>
#### INconvenience features
<a name="_deleting_a_repo"></a>
##### deleting a repo
By design, there is no code in gitolite to *delete* a repo if the repo was
specified by name in the config file. (Wildcard repos *can* be deleted by the
user; see [here][rmrepo] for details).
If you *do* want to permanently delete a *non*-wildcard repo, here's what you
do:
* remove the repo from the gitolite-admin repo clone's `conf/gitolite.conf`
file. "add" the change, commit, and push.
* *then* remove the repo from `~/repositories` on the server (or whatever
you set `$GL_REPO_BASE` to in the `~/.gitolite.rc`)
<a name="_helping_with_gitweb"></a>
#### helping with gitweb
Although gitweb is a completely separate program, gitolite can do quite a
lot to help you manage gitweb access as well; once the initial setup is
complete, you can do it all from within the gitolite config file!
If you just want gitweb to show some repositories, see [gwd] for how to
specify which repos to show. Other advanced uses are described here.
[gwd]: http://sitaramc.github.com/gitolite/doc/2-admin.html#gwd
<a name="_easier_to_link_gitweb_authorisation_with_gitolite"></a>
##### easier to link gitweb authorisation with gitolite
Over and above whether a repo is even *shown* by gitweb, you may want to
further restrict people, allowing them to view *only* those repos for which
they have been given read access by gitolite.
This requires that:
* you have to have some sort of HTTP auth on your web server (out of my
scope, sorry!)
* the HTTP auth should use the same username (like "sitaram") as used in the
gitolite config (for the corresponding user)
Normally a superuser sets up passwords for users using the "htpasswd" command,
but this is an administrative chore.
Robin Smidsrød had the *great* idea that, since each user already has pubkey
access to `git@server`, this gives us a very neat way of using gitolite to let
the users *manage their own HTTP passwords*. Here's how:
* setup apache so that the htaccess file it looks for is owned by the "git"
user
* in the `~/.gitolite.rc` file, look for the variable `$HTPASSWD_FILE` and
point it to this file
* tell your users to type in `ssh git@server htpasswd` to set or change
their HTTP passwords
Of course some other authentication method can be used (e.g. `mod_ldap`) as
long as the usernames match.
Gitweb allows you to specify a subroutine to decide on access. We use that
feature and tie it to gitolite. Configuration example can be found in
`contrib/gitweb/`.
<a name="_umask_setting"></a>
##### umask setting
Gitweb not able to read your repos? You can change the umask for newly
created repos to something more relaxed -- see the `~/.gitolite.rc` file
<a name="_advanced_features"></a>
#### advanced features
<a name="_repos_named_with_wildcards"></a>
##### repos named with wildcards
Please see `doc/wildcard-repositories.mkd` for all the details.
<a name="_admin_defined_commands"></a>
##### admin defined commands
This requires the wildcards feature to be enabled, but is then an extremely
powerful feature. See `doc/admin-defined-commands.mkd`.
<a name="_access_control_for_external_commands"></a>
##### access control for external commands
Gitolite now has a mechanism for allowing access control for arbitrary
external commands, as long as they are invoked via ssh and present a
server-side command that contains enough information to make an access control
decision.
Note that this is incompatible with giving people shell access as described in
`doc/ssh-troubleshooting.mkd` -- people who have shell access are not
subject to this mechanism (it wouldn't make sense to try and control someone
who has shell access anyway).
In general, external commands require changes in one or both the config files;
the sample files in `conf/` double as documentation, so you should look there
for examples and usage.
Commands implemented so far are:
* rsync
* svnserve (see next section for a brief description; this has been
contributed by Simon and Vladimir)
<a name="_svnserve"></a>
###### svnserve
If you are transitioning from SVN to gitolite, and have a lot of users using
public-key authentication with SVN, this feature may be useful to you. Once
you migrate all users' public keys into gitolite, you can set the `$SVNSERVE`
variable in `~/.gitolite.rc` to tie `svnserve` with gitolite's authentication
system. Assuming you installed gitolite to the same user as the one you used
for SVN, SVN connectivity will be retained, and users will be able to use
both SVN and git using the same SSH configuration.
<a name="_design_choices"></a>
### design choices
<a name="_keeping_the_parser_and_the_access_control_separate"></a>
#### keeping the parser and the access control separate
There are two programs concerned with access control:
* `gl-auth-command`, the program that is run via `~/.ssh/authorized_keys`;
this decides whether git should even be allowed to run (basic R/W/no
access). (This one cannot decide on the branch-level access; it is not
known at this point what branch is being accessed)
* the update-hook on each repo, which decides the per-branch permissions
I have chosen to keep the relatively complex task of parsing the config file
out of them to keep them simpler (and faster). So any changes to the config
have to be first "compiled", and the access control programs use this
"compiled" version of the config. (The compile step also refreshes
`~/.ssh/authorized_keys`).
If you choose the "easy install" method, all this is quite transparent to you
anyway. If you cannot use the easy install and must install manually, I have
clear instructions on how to set it up.
[repout]: http://sitaramc.github.com/gitolite/doc/report-output.html
[delegation]: http://sitaramc.github.com/gitolite/doc/delegation.html
[rmrepo]: http://sitaramc.github.com/gitolite/doc/admin-defined-commands.html#rmrepo