gitolite/doc/mirroring.mkd

# mirroring a gitolite setup

Mirroring git repos is essentially a one-liner.  For each mirror you want to
update, you just add a post-receive hook that says

    #!/bin/bash
    git push --mirror slave_user@mirror.host:/path/to/repo.git

But life is never that simple...

**This document has been tested using a 3-server setup, all installed using
the "non-root" method (see doc/0-INSTALL.mkd).  However, the process is
probably not going to be very forgiving of human error -- like anything that
is this deep in "system admin" territory, errors are likely to be costly.  If
you're the kind who hits enter first and then thinks about what he typed,
you're in for some fun times ;-)**

**On the plus side, everything we do is done using git commands, so things are
never *really* lost until you do a `git gc`**.

----

In this document:

  * <a href="#RULE_NUMBER_ONE_">RULE NUMBER ONE!</a>
  * <a href="#things_that_will_NOT_be_mirrored_by_this_process">things that will NOT be mirrored by this process</a>
  * <a href="#conventions_in_this_document">conventions in this document</a>
  * <a href="#setting_up_mirroring">setting up mirroring</a>
      * <a href="#install_gitolite_on_all_servers">install gitolite on all servers</a>
      * <a href="#generate_keypairs">generate keypairs</a>
      * <a href="#setup_the_mirror_shell_on_each_server">setup the mirror-shell on each server</a>
      * <a href="#set_slaves_to_slave_mode">set slaves to slave mode</a>
      * <a href="#set_slave_server_lists">set slave server lists</a>
  * <a href="#syncing_the_mirrors_the_first_time">syncing the mirrors the first time</a>
  * <a href="#switching_over">switching over</a>
  * <a href="#the_return_of_foo">the return of foo</a>
      * <a href="#switching_back">switching back</a>
      * <a href="#making_foo_a_slave">making foo a slave</a>
  * <a href="#URLs_that_your_users_will_use">URLs that your users will use</a>

<a name="RULE_NUMBER_ONE_"></a>

### RULE NUMBER ONE!

**RULE OF GIT MIRRORING: users should push directly to only one server**!  All
the other machines (the slaves) should be updated by the master server.

If a user pushes directly to one of the slaves, those changes will get wiped
out on the next mirror push from the real master server.

Corollary: if the primary went down and you effected a changeover, you must
make sure that the primary does not come up in a push-enabled mode when it
recovers.

<a name="things_that_will_NOT_be_mirrored_by_this_process"></a>

### things that will NOT be mirrored by this process

Let's get this out of the way.  This procedure will only mirror your git
repositories, using `git push --mirror`.  Therefore, certain files will not be
mirrored:

  * gitolite log files
  * "gl-creator" and "gl-perms" files
  * "projects.list", "description", and entries in the "config" files within
    each repo

None of these affect actual repo contents of course, but they could be
important, (especially the gl-creator, although if your wildcard pattern had
"CREATOR" in it you can recreate those files easily enough anyway).

Your best bet is to use rsync for the log files, and tar for the others, at
regular intervals.

<a name="conventions_in_this_document"></a>

### conventions in this document

The userid hosting gitolite is `gitolite` on all machines.  The servers are
foo, bar, and baz.  At the beginning, foo is the master, the other 2 are
slaves.

<a name="setting_up_mirroring"></a>

### setting up mirroring

<a name="install_gitolite_on_all_servers"></a>

#### install gitolite on all servers

  * before running the final step in the install sequence, make sure you go to
    the `hooks/common` directory and rename `post-receive.mirrorpush` to
    `post-receive`.  See doc/hook-propagation.mkd if you're not sure where you
    should look for `hooks/common`.

  * if the server already has gitolite installed, use the normal methods to
    make sure this hook gets in.

  * Use the same "admin key" on all the machines, so that the same person has
    gitolite-admin access to all of them.

<a name="generate_keypairs"></a>

#### generate keypairs

Each server will be potentially logging on to one or more of the other
servers, so first generate keypairs for all of them (`ssh-keygen`) and copy
the `.pub` files to all other servers, named appropriately.  So foo will have
bar.pub and baz.pub, etc.

<a name="setup_the_mirror_shell_on_each_server"></a>

#### setup the mirror-shell on each server

If you installed gitolite using the from client method, run the following:

    # on foo
    export GL_ADMINDIR=` cd $HOME;perl -e 'do ".gitolite.rc"; print $GL_ADMINDIR'`
    cat bar.pub baz.pub |
        sed -e 's,^,command="'$GL_ADMINDIR'/src/gl-mirror-shell" ,' >> ~/.ssh/authorized_keys

If you installed using any of the other 3 methods do this:

    cat bar.pub baz.pub |
        sed -e 's,^,command="'$(which gl-mirror-shell)'" ,' >> ~/.ssh/authorized_keys

Also do the same thing on the other machines.

Now test this access:

    # on foo
    ssh gitolite@bar pwd
        # should print /home/gitolite/repositories
    ssh gitolite@bar uname -a
        # should print the appropriate info for that server

Similarly test the other combinations.

<a name="set_slaves_to_slave_mode"></a>

#### set slaves to slave mode

Set slave mode on all the *slave* servers by setting `$GL_SLAVE_MODE = 1`
(uncommenting the line if necessary).

Leave the master server's file as is.

<a name="set_slave_server_lists"></a>

#### set slave server lists

On the master (foo), set the names of the slaves by editing the
`~/.gitolite.rc` to contain:

    $ENV{GL_SLAVES} = 'gitolite@bar gitolite@baz';

**Note the syntax well; this is critical**:

  * **this must be in single quotes** (or you must remember to escape the `@`)
  * the variable is an ENV var, not a plain perl var
  * the values are *space separated*
  * each value represents the userid and hostname for one server

The basic idea is that this string, should be usable in both the following
syntaxes:

    git clone gitolite@bar:repo
    ssh gitolite@bar pwd

You can also use ssh host aliases.  Let's say server "bar" has a non-standard
port number:

    # in ~/.ssh/config on foo
    host mybar
        hostname bar
        user gitolite
        port 2222

    # in ~/.gitolite.rc on foo
    $ENV{GL_SLAVES} = 'bar gitolite@baz';

And that's really all there is, unless...

<a name="syncing_the_mirrors_the_first_time"></a>

### syncing the mirrors the first time

This is fine if you're setting up everything from scratch.  But if your master
server already had some repos with commits on them, you have to manually sync
them up once.

    # on foo
    gl-mirror-sync gitolite@bar
        # path to "sync" program is ~/.gitolite/src if "from-client" install

<a name="switching_over"></a>

### switching over

Let's say foo goes down.  You want to make bar the main server, and continue
to have "baz" be a slave.

  * on bar, edit `~/.gitolite.rc` and set

        $GL_SLAVE_MODE = 0;
        $ENV{GL_SLAVES} = 'gitolite@baz';

  * **sanity check**: go to your gitolite-admin clone, add a remote for "bar",
    fetch it, and make sure they are the same:

        git remote add bar gitolite@bar:gitolite-admin
        git fetch bar
        git branch -a -v
            # check that all SHAs are the same

  * inform everyone of the new URL for their repos (see next section for more
    on this)

  * make sure that if "foo" does come up, it will not immediately start
    serving requests.  You'll be in trouble if (a) foo comes up as it was
    before, and (b) some developer still had the old URL lying around and
    started pushing changes to it.

    You could jump in quickly and set `$GL_SLAVE_MODE = 1` as soon as the
    system comes up.  Better still, use extraneous means to block incoming
    connections from normal users (out of scope for this document).

<a name="the_return_of_foo"></a>

### the return of foo

<a name="switching_back"></a>

#### switching back

Switching back is fairly easy.

  * synchronise all repos from bar to foo.  This may take some time, depending
    on how long foo was down.

        # on bar
        gl-mirror-sync gitolite@foo
            # path to "sync" program is ~/.gitolite/src if "from-client" install

  * turn off pushes on "bar" by setting slave mode to 1
  * run the sync once again; this should complete quickly

  * **double check by comparing some the repos on both sides if needed**.  You
    could run the following snippet on all servers for a quick check:

        cd ~/repositories   # or wherever $REPO_BASE is
        find . -type d -name "*.git" | sort |
        while read r
        do
            echo $r
            git ls-remote $r | sort
        done | md5sum

  * on foo, set the slave list (or check that it is correct)
  * on foo, set slave mode off
  * tell everyone to switch back

<a name="making_foo_a_slave"></a>

#### making foo a slave

If "foo" does come up in a controlled manner, you might not want to switch
back right away.  Unless you're doing DNS tricks, users may be peeved at
having to do 2 switches.

If you want to make foo a slave, you know the drill by now:

  * set slave mode to 1 on foo
  * on bar, add foo as a slave

        # in ~/.gitolite.rc on bar
        $ENV{GL_SLAVES} = 'gitolite@foo gitolite@baz';

I think that should cover pretty much everything.  I *have* tested most of
this, but YMMV.

----

<a name="URLs_that_your_users_will_use"></a>

### URLs that your users will use

Unless you play DNS tricks, it is more than likely that your users would have
to change the URLs they use to access their repos if you change the server
they push to.

I cannot speak for the plethora of git client software out there but for
normal git, this problem can be mitigated somewhat by doing this:

  * in `~/.ssh/config` on my workstation, I have

        host gl
            hostname=primary.server.ip
            user=gitolite

  * all my `git clone` commands use `gl:reponame` as the URL

  * if the primary goes down, and I have to access the secondary, I just
    change the `hostname` line in `~/.ssh/config`.

That's it.  Every clone of every repo used anywhere in this userid is now
changed.

To repeat, this may or may not work with all the git clients that exist (like
jgit, or any of the GUI tools, and especially if you're on Windows).

If anyone has a better idea, something that works more universally, I'd love
to hear it.