Sitaram Chamarty d6704d052a doc cleanup on info and expand command

jefferai pointed out that some of the links about this were broken, and
a quick look showed that it was described in multiple places too.
Brought it all together...

2010-08-21 17:02:12 +05:30

20 KiB

Raw Blame History

ssh troubleshooting

In this document:

the most common problems that an admin will see
basic ssh troubleshooting
windows issues
details
some other tips and tricks

This document should help you troubleshoot ssh-related problems in accessing gitolite after the install has completed successfully.

In addition, I strongly recommend reading doc/9-gitolite-and-ssh.mkd, which is a very detailed look at how gitolite uses ssh's features on the server side. Most people don't know ssh as well as they think they do; even if you don't have any problems right now, it's worth skimming over.

In addition to both these documents, there's now a program called sshkeys-lint that you can run on your client. Run it without arguments to get help on how to run it and what inputs it needs.

IMPORTANT NOTE: A lot of this document applies only if you installed using the from-client method . If you used one of the other 3 methods , some of it may or may not apply. At the very least, any mention of ssh gitolite below will change to ssh git@server; see this for why.

the most common problems that an admin will see

Ironically, these problems only happen to the person who installed gitolite using easy-install (the "from-client" method in doc/0-INSTALL.mkd), and has utterly failed to read/heed the message that shows up at the end of running that command. This is because only the admin has two ssh keys to the server (see "basic ssh troubleshooting for the main admin" section below for more on this).

Both these problems are caused by using the wrong key, thus bypassing gitolite completely:

you get fatal: 'reponame' does not appear to be a git repository, and yet you are sure 'reponame' exists, you haven't mis-spelled it, etc.
you are able to clone repositories but are unable to push changes back (the error complains about the GL_RC environment variable not being set, and the hooks/update failing in some way).

Let us recap the message that appears on a successful run of the "easy-install" program; it looks something like this (with suitable values substituted for <user>, <server>, and <port>):

IMPORTANT NOTE -- PLEASE READ!!!
    *Your* URL for cloning any repo on this server will be
        gitolite:reponame.git

    *Other* users you set up will have to use
        <user>@<server>:reponame.git
    However, if your server uses a non-standard ssh port, they should use
        ssh://<user>@<server>:<port>/reponame.git

    If this is your first time installing gitolite, please also:
        tail -31 src/gl-easy-install
    for next steps.

The first error above happens if you use git@server:reponame instead of gitolite:reponame. All your repos are actually in a subdirectory pointed to by $REPO_BASE in the rc file (default: repositories). Gitolite internally prefixes this before calling the actual git command you invoked, but since you're bypassing gitolite completely, this prefixing does not happen, and so the repo is not found.

The second error happens if you use git@server:repositories/reponame.git (assuming default $REPO_BASE setting) -- that is, you used the full unix path. Since the "prefixing" mentioned above is not required, the shell finds the repo and clones ok. But when you push, gitolite's update hook kicks in, and fails to run because you some of the environment variables it is expecting are not present.

basic ssh troubleshooting

I assume the gitolite server is called "server" and the user hosting all the gitolite repos is "git". I will also be using "sitaram" as the gitolite username of the admin.

Unless specifically mentioned, all these commands are run on the user's or admin's workstation, not on the server.

passphrases versus passwords

When you create an ssh keypair, you have the option of protecting it with a passphrase. When you subsequently use that keypair to access a remote host, your local ssh client needs to unlock the corresponding private key, and ssh will probably ask for the passphrase you set when you created the keypair.

Do not confuse or mistake this prompt (Enter passphrase for key '/home/sitaram/.ssh/id_rsa':) for a password prompt from the remote server!

You have two choices to avoid this prompt every time you try to access the remote. The first is to create keypairs without a passphrase (just hit enter when prompted for one). Be sure to add a passphrase later, once everything is working, using ssh-keygen -p.

The second is to use ssh-agent (or keychain, which in turn uses ssh-agent) or something like that to manage your keys. Other than the next section, further discussion of this is out of scope of this document.

ssh-agent problems

Run ssh-add -l. If this responds with either "The agent has no identities." or "Could not open a connection to your authentication agent.", skip this section.

However, if it lists some keys, like this:

2048 fc:c1:48:1e:06:31:97:a4:8b:fc:37:b2:76:14:c7:53 /home/sitaram/.ssh/id_rsa (RSA)
2048 d2:e0:7f:fa:1a:89:22:41:bb:06:d9:ff:a7:27:36:5c /home/sitaram/.ssh/sitaram (RSA)

then run ls ~/.ssh and make sure that all the keypairs you have there are represented in the ssh-add -l output.

If you find any keypairs in ~/.ssh that are not represented in the ssh-add -l output, add them. For instance, if ssh-add -l showed me only the id_rsa key, but I also had a sitaram (and sitaram.pub) keypair, I'd run ssh-add ~/.ssh/sitaram to add it.

This is because ssh-agent has a quirk: if ssh-add -l shows any keys at all, ssh will only use those keys. Even if you explicitly specify an unlisted key using ssh -i or an identityfile directive in the config file, it won't use it.

basic ssh troubleshooting for the main admin

You're the "main admin" if you're trying to access gitolite from the same workstation and user account where you ran the "easy install" command. You should have two keypairs in your ~/.ssh directory. The pair called id_rsa (and id_rsa.pub) was probably the first one you created, and you used this to get passwordless (pubkey based) access to the server (which was a pre-requisite for running the easy install command).

The second keypair has the same name as the last argument in the easy install command you ran (in my case, sitaram and sitaram.pub). It was probably created by the easy install script, and is the key used for gitolite access.

In addition, you should have a "gitolite" paragraph in your ~/.ssh/config, looking something like this:

host gitolite
     user git
     hostname server
     identityfile ~/.ssh/sitaram

If any of these are not true, you did something funky in your install; email me or hop onto #git and hope for the best ;-)

Otherwise, run these checks:

ssh git@server should get you a command line.

If it asks you for a password, then your id_rsa keypair changed after you ran the easy install, or someone fiddled with the ~/.ssh/authorized_keys file on the server.

If it prints the gitolite version and access info (see doc/report-output.mkd), you managed to overwrite the id_rsa keypair with the sitaram keypair, or something equally weird.
ssh gitolite info should print some gitolite version and access info. If you get the output of the GNU info command instead, you probably reused your id_rsa keypair as your sitaram keypair, or overwrote the sitaram keypair with the id_rsa keypair.

There are many ways to fix this, depending on where and what the damage is. The most generic way (and therefore time-taking) is to re-install gitolite from scratch:

make a backup of your gitolite-admin repo clone somewhere (basically your "keydir/*.pub" and your "conf/gitolite.conf"). If necessary get these files from the server's ~/.gitolite directory.
log on to the server somehow (using some other account, using a password, su-ing in, etc) and delete ~/.ssh/authorized_keys. Rename or move aside ~/.gitolite so that also looks like it is missing.
back on your workstation, make sure you have 2 keypairs (id_rsa and sitaram, along with corresponding .pub files). Create them if needed. Also make sure they are different and not a copy of each other :-)
install gitolite normally:
- run ssh-copy-id -i ~/.ssh/id_rsa git@server to get passwordless access to the server. (Mac users may have to do this step manually)
- make sure ssh git@server pwd prints the $HOME of git@server without asking for a password. Do not proceed till this works.
- run easy install again, (in my case: cd gitolite-source; src/gl-easy-install -q git server sitaram)
go to your gitolite-admin repo clone, and copy conf/gitolite.conf and keydir/*.pub from your backup to this directory
copy (be sure to overwrite!) ~/.ssh/sitaram.pub also to keydir
now git add keydir; git commit; git push -f

That's a long sequence but it should work.

basic ssh troubleshooting for a normal user

For a normal user, life is much simpler. They should have only one pubkey, which was previously sent to the gitolite admin to add into the admin repo's keydir as "user.pub", and then "user" given permissions to some repo.

ssh git@server info should get you gitolite version and access info. If it asks you for a password, your pubkey was not sent to the server properly. Check with your admin.

If it gets you the GNU info command output, you have shell access. This means you had command line access to the server before you were added as a gitolite user. If you send that same key to your gitolite admin to include in the admin repo, it won't work. For reasons why, see below.

windows issues

On windows, I have only used msysgit, and the openssh that comes with it. Over time, I have grown to distrust putty/plink due to the number of people who seem to have trouble when those beasts are involved (I myself have never used them for any kind of git access). If you have unusual ssh problems that just don't seem to have any explanation, try removing all traces of putty/plink, including environment variables, etc., and then try again.

If you can offer an authoritative account of the complications involved, and how to resolve them and get things working, I'd be happy to credit you and include it, either directly here if it is short enough or just an external link, or in contrib/ if it's a longer piece of text.

details

Here's how it all hangs together.

files on the server

the authkeys file; this contains one line containing the pubkey of each user who is permitted to login without a password.

Pubkey lines that give shell access look like this:
```
ssh-rsa AAAAB3NzaC[snip]uPjrUiAUew== /home/sitaram/.ssh/id_rsa
```
On a typical server there will be only one or two of these lines.

Note that the last bit (/home/sitaram/.ssh/id_rsa) is purely a comment field and can be anything. Also, the actual lines are much longer, about 400 characters; I snipped 'em in the middle, as you can see.

In contrast, pubkey lines that give access to git repos hosted by gitolite look like this:
```
command="[some path]src/gl-auth-command sitaram",[some restrictions] ssh-rsa AAAAB3NzaC[snip]s18OnB42oQ== sitaram@sita-lt
```
You will have many more of these lines -- one for every pubkey file in keydir/ of your gitolite-admin repo, with the corresponding username in place of "sitaram" in the example above.

The "command=" at the beginning ensures that when someone with the corresponding private key logs in, they don't get a shell. Instead, the gl-auth-command program is run, and (in this example) is given the argument sitaram. This is how gitolite is invoked, (and is told the user logging in is "sitaram").

files on client

default keypair; used to get shell access to servers. You would have copied this pubkey to the gitolite server in order to log in without a password. (On Linux systems you may have used ssh-copy-id to do that). You would have done this before you ran the easy install script, because otherwise easy install won't run!
```
~/.ssh/id_rsa
~/.ssh/id_rsa.pub
```
gitolite keypair; the "sitaram" in this is the 3rd argument to the src/gl-easy-install command you ran; the easy install script does the rest
```
~/.ssh/sitaram
~/.ssh/sitaram.pub
```
config file; this file has an entry for gitolite access:
```
~/.ssh/config
```
To understand why we need that, let's step back a bit. Normally, you might expect to access gitolite repos like this:
```
ssh://git@server/reponame.git
```
But this won't work, because this ends up using the default keypair (normally), which gives you a command line. Which means it won't invoke the gl-auth-command program at all, and so none of gitolite's access control will work.

You need to force ssh to use the other keypair when performing a git operation. With normal ssh, that would be
```
ssh -i ~/.ssh/sitaram git@server
```
but git does not support putting an alternate keypair in the URL.

Luckily, ssh has a very convenient way of capturing all the connection information (username, hostname, port number (if it's not the default 22), and keypair to be used) in one "paragraph" of ~/.ssh/config. This is what the para looks like for us (the easy install script puts it there the first time):
```
host gitolite
     user git
     hostname server
     identityfile ~/.ssh/sitaram
```
(The "gitolite" can be anything you want of course; it's like a group name for all the stuff below it). This ensures that typing
```
ssh gitolite
```
is equivalent to
```
ssh -i ~/.ssh/sitaram git@server
```
and therefore this:
```
git clone gitolite:reponame.git
```
now works as expected, invoking the special keypair instead of the default one.

why two keys on client

[This section is only applicable to installs done using the "from-client" method; see doc/0-INSTALL.mkd for details].

Why do I (the admin) need two different keypairs?

There are two types of access the admin will make to the server: a normal login, to get a shell prompt, and gitolite access (clone/fetch/push etc). The first access needs an authkeys line without any "command=" restrictions, while the second requires a line with such a restriction.

And we can't use the same key for both because there is no way to disambiguate them; the ssh server will always (always) pick the first one in sequence when the key is offered by the ssh client.

So the next question is usually "I have other ways to get a shell on that account (like su - git from some other account), so why do I need a key for shell access at all?"

The answer to this is that the "easy install" script, being written for the most general case, needs shell access via ssh to do its stuff. If you have access otherwise, you really should use one of the other 3 install methods to install gitolite. Please see the install doc for details.

some other tips and tricks

giving shell access to gitolite users

We've managed (thanks to an idea from Jesse Keating) to make it possible for a single key to allow both gitolite access and shell access.

This is done by copying the pubkey (to which you want to give shell access) to the server and running either

cd $HOME/.gitolite  # assuming default $GL_ADMINDIR in ~/.gitolite.rc
src/gl-tool shell-add ~/foo.pub

gl-tool shell-add ~/foo.pub

The first method is to be used if you used the user-install mode, while the second method is for the system-install followed by user-setup mode (see doc/0-INSTALL.mkd, section on "install methods", for more on this)

IMPORTANT UPGRADE NOTE: previous implementations of this feature were crap. There was no easy/elegant way to ensure that someone who had repo admin access would not manage to get himself shell access.

Giving someone shell access requires that you should have shell access in the first place, so the simplest way is to enable it from the server side only.

losing your admin key

If you lost the admin key, and need to re-establish ownership of the gitolite-admin repository with a fresh key, take a look at the src/gl-dont-panic program. You will need shell access to the server of course. Run it without arguments to get instructions.

simulating ssh-copy-id

don't have ssh-copy-id? This is broadly what that command does, if you want to replicate it manually. The input is your pubkey, typically ~/.ssh/id_rsa.pub from your client/workstation.

it copies it to the server as some file
it appends that file to ~/.ssh/authorized_keys on the server (creating it if it doesn't already exist)
it then makes sure that all these files/directories have go-w perms set (assuming user is "git"):
```
/home/git/.ssh/authorized_keys
/home/git/.ssh
/home/git
```

[Actually, sshd requires that even directories above ~ (/, /home, typically) also must be go-w, but that needs root. And typically they're already set that way anyway. (Or if they're not, you've got bigger problems than gitolite install not working!)]

20 KiB Raw Blame History