Sitaram Chamarty c1bd3ca69c umpteenth doc revamp...

because someone else found the doc overwhelming.  However, the suggested
reading order (which so far existed only on the wiki) was probably a
good thing to have at the top of the README, and the disclaimers about
ssh may help keep my sanity a little longer ;-)

2010-08-27 16:54:38 +05:30

20 KiB

Raw Blame History

ssh troubleshooting

In this document:

(common) ssh asks for a password
problems when using package, root, or non-root install methods
problems when using the "from-client" install method
windows issues
details
- files on the server
- files on client
some other tips and tricks

This document should help you troubleshoot ssh-related problems in installing and accessing gitolite.

This is about all the help I can give you in terms of the ssh aspect of using gitolite. If you're installing gitolite, you're a "system admin", like it or not. Ssh is therefore a necessary skill. Please take the time to learn at least enough to get passwordless access working.

I have spent more than my share of time helping people debug their misconfigured servers, simply because they tried to blame gitolite for their troubles. This stops now. I'd rather spend time on actual gitolite features, code, and documentation.

Other resources:

I strongly recommend reading doc/9-gitolite-and-ssh.mkd, which is a very detailed look at how gitolite uses ssh's features on the server side. Most people don't know ssh as well as they think they do; even if you don't have any problems right now, it's worth skimming over.
there's a program called sshkeys-lint that you can run on your client. Run it without arguments to get help on how to run it and what inputs it needs.

(common) ssh asks for a password

NOTE: This section should be useful to anyone trying to get password-less access working. It is not specific to gitolite.

You have generated a keypair on your workstation (ssh-keygen) and copied the public part of it (~/.ssh/id_rsa.pub, by default) to the server.

On the server you have appended this file to ~/.ssh/authorized_keys. Or you ran something, like the gl-setup or gl-easy-install steps during a gitolite install, which should have done that for you.

You now expect to log in without having to type in a password, but when you try, you are being asked for a password.

This is a quick checklist:

make sure you're being asked for a password and not a passphrase. Do not confuse or mistake a prompt saying Enter passphrase for key '/home/sitaram/.ssh/id_rsa': for a password prompt from the remote server!

When you create an ssh keypair using ssh-keygen, you have the option of protecting it with a passphrase. When you subsequently use that keypair to access a remote host, your local ssh client needs to unlock the corresponding private key, and ssh will probably ask for the passphrase you set when you created the keypair.

You have two choices to avoid this prompt every time you try to use the private key. The first is to create keypairs without a passphrase (just hit enter when prompted for one). Be sure to add a passphrase later, once everything is working, using ssh-keygen -p.

The second is to use ssh-agent (or keychain, which in turn uses ssh-agent) or something like that to manage your keys. Other than discussing one more potential trouble-spot with ssh-agent (see below), further discussion of ssh-agent/keychain is out of scope of this document.
make sure the right private key is being offered. Run ssh in very verbose mode and look for the word "Offering", like so:
```
ssh -vvvv user@host pwd 2> >(grep -i offer)
```
If some keys are being offered, but not the key that was supposed to be used, you may be using ssh-agent; see next bullet.

If you don't see any offers being made at all, then you probably don't have any protocol 2 keys in your ~/.ssh (names are id_rsa or id_dsa, with corresponding .pub files).
If ssh-add -l responds with either "The agent has no identities." or "Could not open a connection to your authentication agent.", then you can skip this bullet.

However, if ssh-add -l lists any keys at all, then something weird happens. Due to a quirk in ssh-agent, ssh will now only use one of those keys, even if you explicitly ask for some other key to be used.

In that case, add the key you want using ssh-add ~/.ssh/mykey and try the access again.
ssh is very sensitive to permissions. An extremely conservative setup is given below, but be sure to do this on both the client and the server:
```
cd $HOME
chmod go-rwx .
chmod -R go-rwx .ssh
```
actually, every component of the path to ~/.ssh/authorized_keys all the way upto the root directory must be at least chmod go-w. So be sure to check / and /home also.
while you're doing this, make sure the owner and group info for each of these components are correct. ls -ald ~ ~/.ssh ~/.ssh/authorized_keys will tell you what they are.
if all that fails, log onto the server as root, cd /var/log, and look for a file called auth.log or secure or some such name. Look inside this file for messages matching the approximate time of your last attempt to login, to see if they tell you what is the problem.

problems when using package, root, or non-root install methods

This section applies if you installed using any of the first 3 methods of install.

In these 3 modes, installation is done on the server, by logging in as some other user and doing and su - git. The admin's workstation has only one key that is known to the server's authkeys file, and this key invokes gitolite. Note that this key is not supposed to get you a shell; it is supposed to invoke gitolite.

As a result, it's a lot easier to debug. Just run ssh git@server info. If this get you the gitolite version and access info, everything is fine. If it asks you for a password, see the very first section of this document for help.

If it gets you the GNU info command output, you have shell access. This probably means you had passwordless shell access to the server before you were added as a gitolite user, and you sent that same key to your gitolite admin to include in the admin repo. This won't work -- the same key appears twice in the authkeys file now, and since the ssh server will always use the first match, the second occurrence (which invokes gitolite) is ignored.

You'll have to (create and) use a different keypair for gitolite access.

problems when using the "from-client" install method

This section applies if you installed using the from-client method.

This method of install is unique in that the admin will have 2 distinct keys to access the server. The default key (~/.ssh/id_rsa) is used to get a shell prompt and to run commands; for example, gl-easy-install uses this key to do all its server-side work.

In addition, there is a named key created just to invoke gitolite instead of starting a shell. The name is whatever you gave as the third argument to the gl-easy-install command (for example, ~/.ssh/sitaram.pub in my case).

Finally, a host gitolite para is added to ~/.ssh/config:

host gitolite
     user git
     hostname server
     identityfile ~/.ssh/sitaram

so that you can use gitolite:reponame as the URL to make ssh use the named key.

All this applies only to the admin. Normal users will only have one key and do not need any of this.

(sidebar) why two keys on client for the admin

There are two types of access the admin will make to the server: a normal login, to get a shell prompt, and gitolite access (clone/fetch/push etc). The first access needs an authkeys line without any "command=" restrictions, while the second requires a line with such a restriction.

And we can't use the same key for both because there is no way to disambiguate them; the ssh server will always (always) pick the first one in sequence when the key is offered by the ssh client.

So the next question is usually "I have other ways to get a shell on that account (like su - git from some other account), so why do I need a key for shell access at all?"

The answer to this is that the "easy install" script, being written for the most general case, needs shell access via ssh to do its stuff. If you have access otherwise, you really should use one of the other 3 install methods to install gitolite. Please see the install doc for details.

bypassing gitolite without intending to

These problems happen to the person who has utterly failed to read/heed the message that shows up at the end of running the gl-easy-install command. Both these problems are caused by using the wrong key, thus bypassing gitolite completely:

you get fatal: 'reponame' does not appear to be a git repository, and yet you are sure 'reponame' exists, you haven't mis-spelled it, etc.
you are able to clone repositories but are unable to push changes back (the error complains about the GL_RC environment variable not being set, and the hooks/update failing in some way).

Let us recap the message that appears on a successful run of the "easy-install" program; it looks something like this (with suitable values substituted for <user>, <server>, and <port>):

IMPORTANT NOTE -- PLEASE READ!!!
    *Your* URL for cloning any repo on this server will be
        gitolite:reponame.git

    *Other* users you set up will have to use
        <user>@<server>:reponame.git
    However, if your server uses a non-standard ssh port, they should use
        ssh://<user>@<server>:<port>/reponame.git

    If this is your first time installing gitolite, please also:
        tail -31 src/gl-easy-install
    for next steps.

The first error above happens if you use git@server:reponame instead of gitolite:reponame. All your repos are actually in a subdirectory pointed to by $REPO_BASE in the rc file (default: repositories). Gitolite internally prefixes this before calling the actual git command you invoked, but since you're bypassing gitolite completely, this prefixing does not happen, and so the repo is not found.

The second error happens if you use git@server:repositories/reponame.git (assuming default $REPO_BASE setting) -- that is, you used the full unix path. Since the "prefixing" mentioned above is not required, the shell finds the repo and clones ok. But when you push, gitolite's update hook kicks in, and fails to run because you some of the environment variables it is expecting are not present.

basic ssh troubleshooting for the admin

Otherwise, run these checks:

ssh git@server should get you a command line without asking for a password.

If it asks you for a password, then your id_rsa keypair changed after you ran the easy install, or someone fiddled with the ~/.ssh/authorized_keys file on the server.

If it prints the gitolite version and access info (see doc/report-output.mkd), you managed to overwrite the id_rsa keypair with the sitaram keypair, or something equally weird.
ssh gitolite info should print some gitolite version and access info. If you get the output of the GNU info command instead, you probably reused your id_rsa keypair as your sitaram keypair, or overwrote the sitaram keypair with the id_rsa keypair.

There are many ways to fix this, depending on where and what the damage is. The most generic way (and therefore time-taking) is to re-install gitolite from scratch:

make a backup of your gitolite-admin repo clone somewhere (basically your keydir/*.pub and your conf/gitolite.conf). If necessary get these files from the server's ~/.gitolite directory.
log on to the server somehow (using some other account, using a password, su-ing in, etc) and delete ~/.ssh/authorized_keys. Rename or move aside ~/.gitolite so that also looks like it is missing.
back on your workstation, make sure you have 2 keypairs (id_rsa and sitaram, along with corresponding .pub files). Create them if needed. Also make sure they are different and not a copy of each other :-)
install gitolite normally:
- run ssh-copy-id -i ~/.ssh/id_rsa git@server to get passwordless access to the server. (Mac users may have to do this step manually)
- make sure ssh git@server pwd prints the $HOME of git@server without asking for a password. Do not proceed till this works.
- run easy install again, (in my case: cd gitolite-source; src/gl-easy-install -q git server sitaram)
go to your gitolite-admin repo clone, and copy conf/gitolite.conf and keydir/*.pub from your backup to this directory
copy (be sure to overwrite!) ~/.ssh/sitaram.pub also to keydir
now git add keydir; git commit; git push -f

That's a long sequence but it should work.

windows issues

On windows, I have only used msysgit, and the openssh that comes with it. Over time, I have grown to distrust putty/plink due to the number of people who seem to have trouble when those beasts are involved (I myself have never used them for any kind of git access). If you have unusual ssh problems that just don't seem to have any explanation, try removing all traces of putty/plink, including environment variables, etc., and then try again.

If you can offer an authoritative account of the complications involved, and how to resolve them and get things working, I'd be happy to credit you and include it, either directly here if it is short enough or just an external link, or in contrib/ if it's a longer piece of text.

details

Here's how it all hangs together.

files on the server

the authkeys file; this contains one line containing the pubkey of each user who is permitted to login without a password.

Pubkey lines that give shell access look like this:
```
ssh-rsa AAAAB3NzaC[snip]uPjrUiAUew== /home/sitaram/.ssh/id_rsa
```
On a typical server there will be only one or two of these lines.

Note that the last bit (/home/sitaram/.ssh/id_rsa) is purely a comment field and can be anything. Also, the actual lines are much longer, about 400 characters; I snipped 'em in the middle, as you can see.

In contrast, pubkey lines that give access to git repos hosted by gitolite look like this:
```
command="[some path]src/gl-auth-command sitaram",[some restrictions] ssh-rsa AAAAB3NzaC[snip]s18OnB42oQ== sitaram@sita-lt
```
You will have many more of these lines -- one for every pubkey file in keydir/ of your gitolite-admin repo, with the corresponding username in place of "sitaram" in the example above.

The "command=" at the beginning ensures that when someone with the corresponding private key logs in, they don't get a shell. Instead, the gl-auth-command program is run, and (in this example) is given the argument sitaram. This is how gitolite is invoked, (and is told the user logging in is "sitaram").

files on client

default keypair; used to get shell access to servers. You would have copied this pubkey to the gitolite server in order to log in without a password. (On Linux systems you may have used ssh-copy-id to do that). You would have done this before you ran the easy install script, because otherwise easy install won't run!
```
~/.ssh/id_rsa
~/.ssh/id_rsa.pub
```
gitolite keypair; the "sitaram" in this is the 3rd argument to the src/gl-easy-install command you ran; the easy install script does the rest
```
~/.ssh/sitaram
~/.ssh/sitaram.pub
```
config file; this file has an entry for gitolite access if you install usine the "from-client" method. (See above for example "host gitolite" para in the ssh config file).

This is needed because this is the only way to force git to use a non-default keypair (unlike command line ssh, which can be given the -i ~/.ssh/sitaram flag to do so).

some other tips and tricks

giving shell access to gitolite users

We've managed (thanks to an idea from Jesse Keating) to make it possible for a single key to allow both gitolite access and shell access.

This is done by copying the pubkey (to which you want to give shell access) to the server and running either

cd $HOME/.gitolite  # assuming default $GL_ADMINDIR in ~/.gitolite.rc
src/gl-tool shell-add ~/foo.pub

gl-tool shell-add ~/foo.pub

The first method is to be used if you used the user-install mode, while the second method is for the system-install followed by user-setup mode (see doc/0-INSTALL.mkd, section on "install methods", for more on this)

IMPORTANT UPGRADE NOTE: previous implementations of this feature were crap. There was no easy/elegant way to ensure that someone who had repo admin access would not manage to get himself shell access.

Giving someone shell access requires that you should have shell access in the first place, so the simplest way is to enable it from the server side only.

losing your admin key

If you lost the admin key, and need to re-establish ownership of the gitolite-admin repository with a fresh key, take a look at the src/gl-dont-panic program. You will need shell access to the server of course. Run it without arguments to get instructions.

simulating ssh-copy-id

don't have ssh-copy-id? This is broadly what that command does, if you want to replicate it manually. The input is your pubkey, typically ~/.ssh/id_rsa.pub from your client/workstation.

it copies it to the server as some file
it appends that file to ~/.ssh/authorized_keys on the server (creating it if it doesn't already exist)
it then makes sure that all these files/directories have go-w perms set (assuming user is "git"):
```
/home/git/.ssh/authorized_keys
/home/git/.ssh
/home/git
```

[Actually, sshd requires that even directories above ~ (/, /home, typically) also must be go-w, but that needs root. And typically they're already set that way anyway. (Or if they're not, you've got bigger problems than gitolite install not working!)]

20 KiB Raw Blame History