It works fine when you're installing off of a tar file because the
Makefile also generates a VERSION file, but when doing from a clone you
still need to generate it.
(plus minor fix to easy install, in the same area of code)
the commits leading up to v1.5 caused the data format to change (we
added a rule sequence number).
This in turn caused a problem for people who may have installed using
the "system install / user setup" mode of install (which includes people
who used RPM/DEB to install it) -- they would now have to *manually* run
"gl-setup" once after the rpm/deb upgrade.
This commit *tries* to mitigate this problem by recording a data format
version number in the compiled output file. On any access to that file,
if the version number is not found or is found to be not equal to the
current version, gl-setup is run again.
The reason I say "*tries*" is that the exact command used to do this is
a bit of a hack for now. However, if it works for Fedora and Debian,
I'm going to leave it at that :)
There were 2 problems with rule sequencing.
Eli had a use case where everyone is equal, but some are more equal than
the others ;-) He wanted a way to say "everyone can create repos under
their own names, but only some people should be able to rewind their
branches".
Something like this would be ideal (follow the rules in sequence for
u1/u2/u3/u4, and you will see that the "deny" rule kicks in to prevent
u1/u2 from being able to rewind, although they can certainly delete
their branches):
@private-owners = u1 u2
@experienced-private-owners = u3 u4
repo CREATOR/.*
C = @private-owners @experienced-private-owners
RWD = CREATOR
RW = WRITERS
R = READERS
- = @private-owners
RW+D = CREATOR
In normal gitolite this doesn't work because the CREATOR rules (which
get translated to "u1" at runtime) end up over-writing the "deny" rule
when u1 or u2 are the creators. This over-writing happens directly at
the "do compiled.pm" step.
With big-config, this does not happen (because @private-owners does not
get expanded to u1 and u2), but the problem remains: the order of
picking up elements of repo_plus and user_plus is such that, again, the
RW+D wins (it appears before the "-" rule).
We fix all that by
- making CREATOR complete to more than just the creator's name (for
"u1", it now becomes "u1 - wild", which is actually illegal to use
for real so there's no possibility of a name clash!)
- maintaining a rule sequence number that is used to sort the rules
eventually applied (this also resulted in the refex+perm hash
becoming a list)
[Please NOTE: this is all about *user* groups, not *repo* groups]
SUMMARY: gl-auth-commmand can now take an optional list of usergroup
names after the first argument (which is the username).
See doc/big-config.mkd in the next commit or so
Since it is possible to do all sorts of shenanigans with wildcards and
repo groups, we
- allow only a fragment called "foo" to set permissions for a group
called "@foo", in addition to a repo called "foo"
- forbid defining any groups within a fragment conf. All "@foo = bar
baz" must be done in the main config file now.
If this proves too limiting for anyone I'll worry about it then.
If you have many thousands of repos and users, neatly organised into
groups, etc., the normal gitolite fails. (It actually runs out of
memory very fast while doing the "compile" when you push the config, due
to the number of combinations of repo/user being stored in the hash!)
This commit series will stop doing that if you set $GL_BIG_CONFIG = 1 in
the rc file.
Some notes:
- deny rules will still work but somewhat differently -- now they must
be placed all together in one place to work like before. Ask me for
details if you need to know before I get done with the docs
- I've tested most of the important features, but not every single
nuance
- the update hook may be a tad less efficient now; we can try and
tweak it later if needed but it shouldn't really hurt anything
significantly even now
- docs have not been written yet
(as if we didn't already have enough programs with the word "install" in
their names!)
Anyway, this does what an RPM or a DEB would do -- basically implement
the instructions in Appendix C of doc/0.
You can use this to do a system-wide install if your distro isn't as
smart, forward-looking, and uptodate as Fedora ;-)
Clone the repo somewhere, cd to it, and run, for example:
sudo src/gl-system-install /usr/local/bin /var/gitolite/conf /var/gitolite/hooks
or something like that. See doc/0 for details. Run without arguments
for help.
Ouch! How mortifying :) I'd always thought this was one of the Brit/US
differences, but to find out that it really *isn't* a word... hmph!
Anyway, in the interest of not breaking existing wild repos, the
ownership file is still called "gl-creater". Everything else has been
changed.
(...thanks to Sverre)
The "fork" adc cannot simply do a "git clone..."; hooks and gl-creater
won't get set up. We need a way to initiate the *creation* of a repo
from a shell command, and then fetch the refs over.
For a long time, we used to trick gitolite into creating a repo for us
by simply using "git ls-remote host:reponame" ;-) Now we have an actual
command, so we can say "ssh git@server git-init \'reponame\'"
Yes; those single quotes are required. Deal with it.
This commit series allows an admin to designate a set of commands that
users can run. For example, he can allow users to delete a repo that
they have created:
ssh git@server rmrepo foo/me/bar
or fork (to use github's terminology) a repo they have "R" access to,
into a new one they have "C" access to:
ssh git@server fork foo/someone-else/bar foo/me/bar
Please see documentation for details
----
(this commit)
- (rc) new variable $GL_ADC_PATH; without this none of this is enabled
- (pm) new helper routine "cli_repo_rights" to get rights/ownership
from outside
- (auth) call $GL_ADC_PATH/$cmd if it exists
This commit series refactors all the rights querying logic.
- old repo_rights sub renamed to wild_repo_rights
- new repo_rights sub to be a single entry point for most rights
queries
- callable from gl-auth-command and expand_wild
- callable from *outside* too, as long as $ENV{GL_USER} is set
- the format of the returned permissions contains C, R, and W as
applicable, with sigils reflecting the 3 possible ways in which you
can get R or W perms (2 ways for C):
@R means @all users have the same access
#R means you're a "super user" (think root's shell prompt) so
you can see all repos
R is the normal, explicit, access
Always passing "-p 22" to ssh (or "-P 22" to scp) if no custom port is given on
the command line causes trouble when not using a host name but an SSH session
name (as defined in .ssh/config) which defines a non-standard port, because the
port given on the command line overrides that port.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Having to specify "D" separately from RW or RW+ was cumbersome, and
although I don't actually use this feature, I can see the point.
One way to think of this is:
- RW and RW+ were the only existing branch level rights
- it doesnt make sense to have D rights without W (hence RW) rights
- so we simply suffix a D to these if required.
Thus you can have RW, RW+, RWD, RW+D.
I hope the (hopefully few) of you who have started to use this feature
will convert your configs when you next upgrade to "pu".
I now regret pushing the previous syntax to master too quickly -- lots
of people use master only, and on the next promotion of pu the syntax
will change. To reduce this exposure, this change will be promoted to
master very soon.
Previous implementations of "give shell access to some gitolite users"
feature were crap. There was no easy/elegant way to ensure that someone
who had repo admin access would not manage to get himself shell access.
Giving someone shell access requires that you should have shell access
in the first place, so the simplest way is to enable it from the server
side only.
So now that we decided to do that, we may as well prepare for other,
future, commands by starting a server-side utility program with
sub-commands (the only current one being "shell-add")
normally, RW+ means permission to rewind or delete.
Now, if you use "D" permission anywhere in a repo config, that means
"delete" and RW+ then means only "rewind", no delete.
All this is about a user trying to look if a repo exists or not, when he
does not have any access to that repo. Ideally, "repo does not exist"
should be indistinguishable from "you dont have perms to that repo".
(1) if $GL_WILDREPOS is not set, you either get a permissions error, or
a "$repo not found in compiled config" death. Fixed.
(2) if $GL_WILDREPOS is set, you either get either a permissions error,
or a "$repo has no matches" death. Fixed.
(3) The following combination leaks info about repo existence:
- actual repo doesn't exist
- spying user don't have C perms
- repo patt doesn't contain CREATER
- RW+ = CREATER is specified (as is normal)
In such case, the "convenience copy" of the ACL that parse_acl
makes, coupled with substituting CREATER for the invoking user means
$repos{$actual_repo} has RW+ for the spying user. This means the
access denied doesn't happen, and control passes to git, which
promptly expresses it unhappiness and angst over being given a repo
that 'does not appear to be a git repository'
This doesn't happen if all those conditions are not met:
- if repo exists, CREATER is set to the real creater, so RW+ =
CREATER does not gain spying user anything
- if spying user has C perms it just gets created, because he has
rights. This is also info leak but we can't prevent it; tighten
the config (maybe by including CREATER in repo pattern) if this
is not wanted
- if repo patt contains CREATER it will never match someone else's
repo anyway!
a configuration like this:
repo CREATER/.*
C = CREATER
RW+ = WRITERS
was buggy; CREATER was implicitly part of WRITERS so he got RW
permissions implicitly, so the push went through
what this means is that until now, everyone who used easy-install
(without needing to set $GIT_PATH in the rc file) had a client-side PATH
that was perfectly valid on the server side also!
- no need to put it at the end of the config file now, yeaaay!
- @all for @all is meaningless and not supported. People asking will
be told to get a life or use git-daemon.
- NAME/ limits for @all repos is ignored for efficiency reasons.
Data dumper was failing (returning an empty string!) on an input config
file of about 350 lines or so (output 2400 lines or so).
Removing the sort sub fixed the problem.
To recap why that sub was put in (see deleted lines in this commit for
details), what we really want is that $creater must appear *last* in the
resulting dump.
So we trick it. "man ascii" tells you that ~ is the highest valued
ASCII character (yes, I know, not utf-8 safe etc... I'll deal with that
if and when needed or punt!). So we just put that in front of $creater
and remove it later...
You *don't* want to do this for $readers and $writers -- then they will
once again sort *after* $creater, which would be a bad thing. Also,
it's probably better this way, because now the order of the hash keys
will be: $readers, $writers, any actual users listed, and then $creater.
This means the effective access rights will be:
1. if you are the creater you get CREATER's rights
2. else if your userid is listed *explicitly* in the config, you get
those rights
3. else if you've been setperm'd as a writer, you get WRITERS rights
4. else if you've been setperm'd as a reader, you get READERS rights
This is different from what used to happen till now; READERS and WRITERS
used to trump explicitly given rights. I'd been meaning to fix that
somehow, but never got around to it, until this DDD (damn Data Dumper!)
forced my hand :)
The new style personal branches work by interpreting the special
sequence /USER/ (including the slashes) in a refname. Docs should be in
the next commit...
the changes to cp/scp are because without "-p" they dont carry perms
across to existing files. So if you forgot to chmod +x your custom
hook and ran easy install, then after that you have to go to the server
side to fix the perms...
I've been unwilling to create the authkeys file if it does not already
exist, because it represents a significant change in accessibility for
that account.
However, in the "distro package" scenario, one wants to make it as easy
as possible for the end-user (who is actually an admin for the gitolite
being hosted on his account, let's not forget) to use.
And it seems that in some cases that might mean he does not (yet) have a
~/.ssh even...
when repos are copied over from elsewhere, one had to run easy install
once again to make the new (OS-copied) repo contain the proper update
hook.
We eliminate this step now, using a new, empty, "hook" as a sentinel and
having "compile" check/fix all repos' hooks.
Since you have to add the repos to conf anyway, this makes it as
seamless as possible. The correct sequence now is
- (server) copy the repo at the OS level
- (admin clone) add it to conf/gitolite.conf, commit, push
Currently the pattern of expand command is line anchored. This is
different than in e.g. grep, and causes extra work to add '.*' prefix
and/or suffix in many use cases.
The new semantics now mean you might get more matches than you would
have gotten earlier. However, the expand command is still totally
undocumented, so I think it is acceptable to change the functionality.
;)
This patch removes the anchoring. So for earlier behavior the specified
pattern needs be in form of '^<pattern>$'. The default pattern is also
changed from '.*' to '^', so there might be even a small speed
improvement. =)
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
stupid me; committed the easy install patch on master *and* pushed,
instead of on pu...
Since I dont want to rewind master, we end up with this completely
unnecessary merge.
let expand_list be just that "expand a list", and leave checking to be
done outside.
otherwise, commit 690604d79 has the side effect of restricting refs to
$REPOPATT_PATT, and so for instance barfing on the perfectly valid
RW+ refs/(?!heads/master) = alice bob
(thanks to Teemu for catching this)
[TODO: allow a callback for a password checking function, such as
"passwd_policy_check". Question is where the function would go.
~/.gitolite.rc is the only possible place among the current set of files
but I'd rather leave that as a list of simple name=value lines for all
sorts of reasons. So maybe something like ~/.gitolite.pm (analogous to
the "gitolite.pm" in the sources I supply), which would get "require'd"
if found, and would contain all user-defined functions like this one...
needs some thinking about]
this came up in some other discussion with bremner. As usual I said no
I won't do it because I don't see any real need.
...then I realised it's just one line :)
(about this commit)
The install doc now describes both the ways of installing gitolite.
It also has a handy appendix for package maintainers describing what
they need to do.
(about the "dps" -- distro packaging support -- commit series)
This commit is the last in the chain meant to make gitolite more
friendly for package maintainers.
Frankly, I never really thought gitolite would get big enough or
important enough for someone to package it, and I always did just
the bare minimum I needed to get it working, first for myself, then
anyone who hopped onto #git and asked. As a result, it had some
quirks in terms of what is expected where and so on...
Luckily, it didn't take a lot of changes to fix it, and this series
of commits should help make it very easy to package gitolite for
system-wide use.
The old install method will now use conf/VERSION instead of src/VERSION everywhere.
The new one, if you use the builtin make file to "make branch.tar" will also create just such a file
gl-install copies
- the initial rc file to ~/.gitolite.rc if it doesn't exist
- src and hooks to GL_ADMINDIR
Make it aware of a package-based setup sequence, where the above two
change somewhat; see code diff.
This should be the last bit of change needed to prepare gitolite setup
so that a distro package maintainer does not have to fiddle too much
with code inside.
(What remains is docs, and a setup script for server-side use, to
replace the latter part of easy install)
if you have read access to the admin repo, you can say
ssh git@server info user1 [...]
Original idea and code by Karteek E. The motivation is to quickly and
easily check what perms a user has. Technically nothing that you can't
glean from the config file itself but it serves as a double check or a
mild debugging aid perhaps.
However note that the branch level rules are much more complex and they
do not, as yet, have any such "helpful" aids. Life is like that
sometimes.
Gitolite allows you to set git repo options using the "config" keyword;
see conf/example.conf for details and syntax.
However, if you are in an installation where the repo admin does not
(and should not) have shell access to the server, then allowing him to
set arbitrary repo config options *may* be a security risk -- some
config settings may allow executing arbitrary commands.
This patch fixes it, introducing a new RC variable to control the
behaviour. See conf/example.gitolite.rc for details
Although I have washed my hands off the security aspect if you use
external commands, that doesn't mean I won't make them as tight as I can
;-) Right now, this is just a place holder -- if people use it and
complain that the pattern is too restrictive, I'll change it.
The wildrepos branch has been merged into master, and deleted. It will no
longer exist as a separate branch. Instead, a new variable
called $GL_WILDREPOS has been added which acts as a switch; when
off (which is the default), many wildrepos features are disabled.
(the "C" permissions, and the getperms (etc.) commands mainly).
Important: if you are using wildrepos, please set "$GL_WILDREPOS = 1;" in
the RC file when you upgrade to this version (or just before you do the
upgrade).
Allow users to set and display description (for gitweb) for their
own wildcard repositories using ssh commands:
setdesc <repo>
getdesc <repo>
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
brought on by realising that you lost $shell_allowed when refactoring
(previous commit) but perl hadn't caught it because -- damn -- you
didn't have "use strict" in gitolite.pm
lots of conflicts, esp in gl-auth-command, due to refactoring the
"special commands" stuff on master
Conflicts:
doc/3-faq-tips-etc.mkd
src/gitolite.pm
src/gl-auth-command
src/gl-compile-conf
great idea by Robin Smidsrød: since users are already capable of
authenticating themselves to gitolite via ssh keys, use that to let them
set or change their own HTTP passwords (ie, run the "htpasswd" command
with the correct parameters on behalf of the "git" user on the server)
code, rc para, and documentation. In fact everything except... ahem...
testing ;-)
and while we're about it, we also reorganised the way these helper
commands (including the venerable "info" are called)
Gitolite uses projects.list to set the owners for gitweb's use.
Unfortunately, this does not work for gitweb setups that set
$projectroot to a directory, thus generating the list of
repositories on the fly.
This patch changes that: gitolite now writes the gitweb.owner
configuration variable for each repository (and properly cleans up after
itself if the owner is removed).
The patch causes gitolite not to write the owner to projects.list
anymore, as this would be redundant.
The owner also needs no longer be escaped, so this patch removes the
poor man's 's/ /+/g' escaping previously in place.
Note that I am not a Perl coder. Thus there are probably better ways to
implement this, but at least it works.
Cc: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: martin f. krafft <madduck@madduck.net>
This is actually a pretty big deal, and I am seriously starting wonder
if calling this "gito*lite*" is justified anymore.
Anyway, in for a penny, in for a pound...
This patch implements a generic way to allow access control for external
commands, as long as they are invoked via ssh and present a server-side
command that contains enough information to make an access control
decision.
The first (and only, so far) such command implemented is rsync.
Please read the changes in this commit (at least the ones in conf/ and
doc/) carefully.
Mpenz asked what would happen if the config looked like
repo foo/abc
R sitaram
repo foo/.*
RW sitaram
If you asked for an expand of '.*', it would pick up permissions from
the second set (i.e., "RW") and print them against "foo/abc".
This is misleading, since those are not the permissions that will
actually be *used*. Gitolite always uses the more specific form if it
is given, which means your actual permissions are just "R".
This patch is to prevent that misleading reporting in this corner case.
- see *all* wildcard repos you have access to (this uses line-anchored
regexes as described in doc/4). Examples:
ssh git@server expand '.*'
ssh git@server expand 'assignment.*'
- show perms like the info command does
Please see comments against 02cee1d for more details and caveats.
The "msysgit doesnt have 'comm'" commit (from 2 days ago), had 2 bugs:
- (smaller) the "+++" which was part of the diff header was triggering
a spurious rc file "new variables" warning, but there were no actual
variables to update
- (bigger) worse, the grep command, when there were no matches,
coupled with the "set -e" to kill the program right there (ouch!)
The way pubkey files are handled by gitolite, this could be used by a
repo admin to get shell access. It's always been there as an
undocumented emergency mechanism for an admin who lost his shell keys or
overwrote them due to not understanding ssh well enough (and it has been
so used at least once).
But not any more...
Like the @SHELL case, this reflects a shift away from treating people
with repo admin rights as eqvt to people who have shell on the server,
and systematically making the former lesser privileged than the latter.
While in most cases (including my $DAYJOB) these two may be the same
person, I am told that's not a valid assumption for others, and there've
been requests to close this potential loophole.
Stop conflating the privilege to push changes to the admin repo with the
privilege to get a shell on the server.
Please read doc/6 carefully before upgrading to this version. Also
please ensure that the gitolite key is *not* your only means to get a
command line on the server
Currently, a line like
RW foo = user1
allows user1 to push any ref that contains the string refs/heads/foo.
This includes refs like
refs/heads/foo
refs/heads/foobar
refs/heads/foo/bar
which is fine; that is what is intended. (You can always use foo$
instead of foo if you want to prevent the latter two).
Similarly,
RW refs/foo = user1
allows
refs/foo
refs/foobar
refs/foo/bar
Now, I don't see this as a "security risk" but the fact is that this
allows someone to clutter your repo with junk like
refs/bar/refs/heads/foo
refs/heads/bar/refs/heads/foo
(or, with the second config line example,
refs/bar/refs/foo
refs/heads/bar/refs/foo
)
My personal advice is if you find someone doing that intentionally, you
should probably take him out and shoot him [*], but since now *two*
people have complained about this, here goes...
----
[*] you don't have to take him out if you don't want to
gitolite specific ssh commands ("getperms", "setperms", "info" etc.)
should exit with non-error code in case of success.
Also "get/setperms" should print to STDOUT instead of STDERR.
This change is specially needed for the gitolite-tools
(http://github.com/tmatilai/gitolite-tools) to work.
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
Support config file including using:
include "filename"
If filename is not an absolute path, it is looked from the
$GL_ADMINDIR/conf/ directory.
For security reasons include is not allowed for fragments.
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
This is a backward incompatible change. If you are using delegation and
you upgrade to this version, please do the following:
* change your gitolite.conf file to use the new syntax (see
doc/5-delegation.mkd in this commit)
* for each branch "foo" in the gitolite-admin repo, do this:
# (on "master" branch)
git checkout foo -- conf/fragments/foo.conf
* git add all those new fragments and commit to master
* delete all the branches on your clone and the server
# again, for each branch foo
git branch -D foo
git push origin :foo
(this commit will probably get reverted after a suitable period has
elapsed and no one is likely to still be using the old syntax).
Forgetting to change it to NAME/ after is a security issue -- you end up
permitting stuff you don't want to!
This commit allows the old syntax but prints a warning
Gitolite allows you to restrict changes by file/dir name. The syntax
for this used "PATH/" as a prefix to denote such file/dir patterns.
This has now been changed to "NAME/" because PATH is potentially
confusing.
While this is technically a backward-incompatible change, the feature
itself was hitherto undocumented, and only a few people were using it,
so I guess it's not that bad...
Also added documentation now.
This reverts commit 6576e82e33.
On oddball configs, where the shell key is reused as the gitolite key by
smart( people|-alecks), the ls-remote stops the program dead, preventing
the "git add" and "git commit" that seed the admin repo.
This makes extra work in terms of fixing it after the fact; removing it
makes the install go further, and all you need to do is (1) delete the
first line from ~/.ssh/authorized_keys on the server and (2) back on the
client do a "git clone gitolite:gitolite-admin".
OK so it needs to be removed. Explaining that was the easy part! The
hard part is explaining why removing it is harmless.
Look at the commit tree around that commit, and see that the commit
before that (b78a720) was partially reverted in e7e6085. b78a720
removed the new_repo call from compile, forcing it to happen only on
auth, which forced this workaround for seeding the admin repo.
Since e7e6085 reverted that part of b78a720, giving back new_repo
functions to compile, this line of code wasn't doing any good. QED and
all that :)
for those not yet able to upgrade (or until I merge this into the branch
you care about), if you have a repo called, say "bk2git", just refer to
it as "bk2git.git" in the clone command!
[Thanks to Mark Frazer for finding this...]
"repo @all" can be used to set permissions or configurations for all
already defined repos. (A repository is defined if it has permission
rules associated, empty "repo" stanza or "@group=..." line is not enough.)
For example to allow a backup user to clone all repos:
# All other configuration
[...]
repo @all
R = backup
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
we've removed the facility of auto-viving "W" access repos when they are
not wildcards. A wildcard pattern like foo/CREATER was
indistinguishable from a non-wildcard repo, and resolving it was
becoming kludgier and kludgier. (See the revert in the commit before
this one for details).
As a side effect of not being able to distinguish wildcard repos from
real repos easily, the expand command now works for a normal repo too
(because we have to make it work for "foo/CREATER")
This reverts commit 33fc0a7e9f.
Was causing too much trouble with access reporting (basic and expanded)
because of the extra ^ at the start...
The paranoia referred to in that commit was this sequence:
- admin creates a named (non wildcard) repo using config file push
- somehow that gets deleted (OS error, corruption, ...)
- admin just asks anyone with a current repo to push it to auto-revive
it (because we allow people with "W" access to non-wildcard repos to
auto-viv repos)
- if you're treating this the same as a wildcard creation, you end up
making this guy the "creater" of that repo, which means he can add
users etc...
We resolve that paranois by disallowing autoviv of "W" access repos at
all... Only "C" access repos can be autovived by a user (this will be
in the next commit)
".../gl-auth-command username" is the normal command that authkeys
forces, and this prevents that key from being used to get a shell.
We now allow the user to get a shell if the forced command has a "-s"
before the "username", like ".../gl-auth-command -s sitaram".
(Now that a plain "ssh gitolite" gets you a shell, there's a new "info"
command that such privileged keys can use to get basic access info).
Thanks to Jesse Keating for the idea! I can't believe this never
occurred to me before, but I guess I was so enamoured of my "innovation"
in converting what used to be an error into some useful info I didn't
think a bit more :/
Looks like I'd forgotten this when I did the autoviv code. Repos
created via gl-compile (when you add a new repo to the config file and
push) worked fine, but repos created via gl-auth (when you autoviv a
repo, wild or not) did not.
This *should* be merged into wildrepos soon after testing; wildrepos
will have a lot more autoviv-ing than master.
The admin repo's post-update hook needs to know where $GL_ADMINDIR is,
and we had a weird way of doing that which depended on gl-install
actually munging the hook code.
We also always assumed the binaries are in GL_ADMINDIR/src.
We now use an env var to pass both these values. This removes the weird
dependency on gl-install that the post-update hook had, as well as make
running other programs easier due to the new $GL_BINDIR env var.
...like "git clone host:foo/", even if it matches "repo foo/.*"
NOTE: I expect a few more of these special cases to be found as time
goes on and people find new ways to abuse the regex system, whether it
is done intentionally or not. Anything not fixable by changing the
config file will be fixed in the code asap.
This one, for instance, seems fixable by using "foo/.+" instead of
"foo/.*". But it actually isn't; the user can do "git clone host:foo//"
and bypass that :(
Still I suspect most situations will get an entry in the "then don't do
that" file :)
----
patient: "doc, it hurts when I do this"
doc: "then don't do that"
Teemu's testing brought up a situtation I had not anticipated:
"repo foo/CREATER" looks like a non-regex, and its creation then (a)
goes by "W" permissions instead of "C" permissions, and (b) the
creater's name does not get recorded (no gl-creater file).
SIDE NOTE: one way is to reduce the paranoia, and just put the
creater name in anyway. Treat a repo created from gl-auth as a
wildcard-matched autovivified repo, because the *other* kind would
have actually got created by gl-compile anyway.
However, I can think of *one* very far-out situation where this
could backfire on an unwary admin, and I'm paranoid :-)
So we need to force it to look like a regex. Moving the line-anchoring
from `parse_acl` to gl-compile sounded fine, until I realised that the
"$" isn't easy. Backslashitis, bigtime, plus the single/double quote
tricks we're playing with the dumped hash adds its own complexities.
Best of both worlds, promote the "^" to gl-compile, keep the "$" where
it is...!
Git repository configurations can be set/unset by declaring "config"
lines in "repo" stanzas in gitolite.conf. For example:
repo gitolite
config hooks.mailinglist = gitolite-commits@example.tld
config hooks.emailprefix = "[gitolite] "
config foo.bar = ""
config foo.baz =
The firs two set (override) the values. Double quotes must be used to
preserve preceding spaces. Third one sets an empty value and the last
removes all keys.
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
we had usurped the email style syntax to separate multiple keys
belonging to the same person, like sitaram@desktop.pub and
sitaram@laptop.pub. If you have so many users that you need the full
email address to disambiguate some of them (or you want to do it for
just plain convenience), you couldn't.
This patch fixes that in a backward compatible way. See
doc/3-faq-tips-etc.mkd for details.
This feature has *no* warranty, and so no documentation. Not more than
this transcript anyway.
config file:
@prof = u1
@TAs = u2 u3
@students = u4 u5 u6
repo assignments/CREATER/a[0-9][0-9]
C = @students
RW+ = CREATER
RW = WRITERS @TAs
R = READERS @prof
session:
as user "u4":
# check your permissions
$ ssh git@server
PTY allocation request failed on channel 0
hello u4, the gitolite version here is v0.95-31-gbcb14ca
you have the following permissions:
C assignments/CREATER/a[0-9][0-9]
@ @ testing
Connection to localhost closed.
# autovivify repos for assignment 12 and 24
$ git clone git@server:assignments/u4/a12 a12
Initialized empty Git repository in /home/sitaram/t/a12/.git/
Initialized empty Git repository in /home/gitolite/repositories/assignments/u4/a12.git/
warning: You appear to have cloned an empty repository.
$ git clone git@server:assignments/u4/a24 a24
Initialized empty Git repository in /home/sitaram/t/a24/.git/
Initialized empty Git repository in /home/gitolite/repositories/assignments/u4/a24.git/
warning: You appear to have cloned an empty repository.
# check what repos you autovivified
$ ssh git@server expand assignments/u4/a[0-9][0-9]
(u4) assignments/u4/a12
(u4) assignments/u4/a24
as user "u5":
# check your basic permissions
$ ssh git@server
PTY allocation request failed on channel 0
hello u5, the gitolite version here is v0.95-31-gbcb14ca
you have the following permissions:
C assignments/CREATER/a[0-9][0-9]
@ @ testing
Connection to localhost closed.
# see if you have access to any of u4's repos
$ ssh git@server expand assignments/u4/a[0-9][0-9]
# (no output produced)
as user "u4":
# allow "u5" read access to assignment 12
# note you type in "R u5", hit enter, then hit Ctrl-D. Gitolite
# then produces a confirmation message starting "New perms are:"
$ ssh git@server setperms assignments/u4/a12
R u5
New perms are:
R u5
as user "u5":
# again see if you have access to any u4 repos
$ ssh git@server expand assignments/u4/a[0-9][0-9]
(u4) assignments/u4/a12
as user "u4":
# check what permissions you gave to assignment 12
$ ssh git@server getperms assignments/u4/a12
R u5
# add RW access to "u6" to assignment 12
# again, type 'em in, then hit Ctrl-D; and note each time you run
# this you're starting from scratch -- you can't "add to" the
# permissions. Deal with it...
$ ssh git@server setperms assignments/u4/a12
R u5
RW u6
New perms are:
R u5
RW u6
as user "u6":
# check what u4 stuff you have access to
$ ssh git@server expand assignments/u4/a[0-9][0-9]
(u4) assignments/u4/a12
