normally, RW+ means permission to rewind or delete.
Now, if you use "D" permission anywhere in a repo config, that means
"delete" and RW+ then means only "rewind", no delete.
All this is about a user trying to look if a repo exists or not, when he
does not have any access to that repo. Ideally, "repo does not exist"
should be indistinguishable from "you dont have perms to that repo".
(1) if $GL_WILDREPOS is not set, you either get a permissions error, or
a "$repo not found in compiled config" death. Fixed.
(2) if $GL_WILDREPOS is set, you either get either a permissions error,
or a "$repo has no matches" death. Fixed.
(3) The following combination leaks info about repo existence:
- actual repo doesn't exist
- spying user don't have C perms
- repo patt doesn't contain CREATER
- RW+ = CREATER is specified (as is normal)
In such case, the "convenience copy" of the ACL that parse_acl
makes, coupled with substituting CREATER for the invoking user means
$repos{$actual_repo} has RW+ for the spying user. This means the
access denied doesn't happen, and control passes to git, which
promptly expresses it unhappiness and angst over being given a repo
that 'does not appear to be a git repository'
This doesn't happen if all those conditions are not met:
- if repo exists, CREATER is set to the real creater, so RW+ =
CREATER does not gain spying user anything
- if spying user has C perms it just gets created, because he has
rights. This is also info leak but we can't prevent it; tighten
the config (maybe by including CREATER in repo pattern) if this
is not wanted
- if repo patt contains CREATER it will never match someone else's
repo anyway!
a configuration like this:
repo CREATER/.*
C = CREATER
RW+ = WRITERS
was buggy; CREATER was implicitly part of WRITERS so he got RW
permissions implicitly, so the push went through
what this means is that until now, everyone who used easy-install
(without needing to set $GIT_PATH in the rc file) had a client-side PATH
that was perfectly valid on the server side also!
- no need to put it at the end of the config file now, yeaaay!
- @all for @all is meaningless and not supported. People asking will
be told to get a life or use git-daemon.
- NAME/ limits for @all repos is ignored for efficiency reasons.
Data dumper was failing (returning an empty string!) on an input config
file of about 350 lines or so (output 2400 lines or so).
Removing the sort sub fixed the problem.
To recap why that sub was put in (see deleted lines in this commit for
details), what we really want is that $creater must appear *last* in the
resulting dump.
So we trick it. "man ascii" tells you that ~ is the highest valued
ASCII character (yes, I know, not utf-8 safe etc... I'll deal with that
if and when needed or punt!). So we just put that in front of $creater
and remove it later...
You *don't* want to do this for $readers and $writers -- then they will
once again sort *after* $creater, which would be a bad thing. Also,
it's probably better this way, because now the order of the hash keys
will be: $readers, $writers, any actual users listed, and then $creater.
This means the effective access rights will be:
1. if you are the creater you get CREATER's rights
2. else if your userid is listed *explicitly* in the config, you get
those rights
3. else if you've been setperm'd as a writer, you get WRITERS rights
4. else if you've been setperm'd as a reader, you get READERS rights
This is different from what used to happen till now; READERS and WRITERS
used to trump explicitly given rights. I'd been meaning to fix that
somehow, but never got around to it, until this DDD (damn Data Dumper!)
forced my hand :)
The new style personal branches work by interpreting the special
sequence /USER/ (including the slashes) in a refname. Docs should be in
the next commit...
the changes to cp/scp are because without "-p" they dont carry perms
across to existing files. So if you forgot to chmod +x your custom
hook and ran easy install, then after that you have to go to the server
side to fix the perms...
I've been unwilling to create the authkeys file if it does not already
exist, because it represents a significant change in accessibility for
that account.
However, in the "distro package" scenario, one wants to make it as easy
as possible for the end-user (who is actually an admin for the gitolite
being hosted on his account, let's not forget) to use.
And it seems that in some cases that might mean he does not (yet) have a
~/.ssh even...
when repos are copied over from elsewhere, one had to run easy install
once again to make the new (OS-copied) repo contain the proper update
hook.
We eliminate this step now, using a new, empty, "hook" as a sentinel and
having "compile" check/fix all repos' hooks.
Since you have to add the repos to conf anyway, this makes it as
seamless as possible. The correct sequence now is
- (server) copy the repo at the OS level
- (admin clone) add it to conf/gitolite.conf, commit, push
Currently the pattern of expand command is line anchored. This is
different than in e.g. grep, and causes extra work to add '.*' prefix
and/or suffix in many use cases.
The new semantics now mean you might get more matches than you would
have gotten earlier. However, the expand command is still totally
undocumented, so I think it is acceptable to change the functionality.
;)
This patch removes the anchoring. So for earlier behavior the specified
pattern needs be in form of '^<pattern>$'. The default pattern is also
changed from '.*' to '^', so there might be even a small speed
improvement. =)
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
stupid me; committed the easy install patch on master *and* pushed,
instead of on pu...
Since I dont want to rewind master, we end up with this completely
unnecessary merge.
let expand_list be just that "expand a list", and leave checking to be
done outside.
otherwise, commit 690604d79 has the side effect of restricting refs to
$REPOPATT_PATT, and so for instance barfing on the perfectly valid
RW+ refs/(?!heads/master) = alice bob
(thanks to Teemu for catching this)
[TODO: allow a callback for a password checking function, such as
"passwd_policy_check". Question is where the function would go.
~/.gitolite.rc is the only possible place among the current set of files
but I'd rather leave that as a list of simple name=value lines for all
sorts of reasons. So maybe something like ~/.gitolite.pm (analogous to
the "gitolite.pm" in the sources I supply), which would get "require'd"
if found, and would contain all user-defined functions like this one...
needs some thinking about]
this came up in some other discussion with bremner. As usual I said no
I won't do it because I don't see any real need.
...then I realised it's just one line :)
(about this commit)
The install doc now describes both the ways of installing gitolite.
It also has a handy appendix for package maintainers describing what
they need to do.
(about the "dps" -- distro packaging support -- commit series)
This commit is the last in the chain meant to make gitolite more
friendly for package maintainers.
Frankly, I never really thought gitolite would get big enough or
important enough for someone to package it, and I always did just
the bare minimum I needed to get it working, first for myself, then
anyone who hopped onto #git and asked. As a result, it had some
quirks in terms of what is expected where and so on...
Luckily, it didn't take a lot of changes to fix it, and this series
of commits should help make it very easy to package gitolite for
system-wide use.
The old install method will now use conf/VERSION instead of src/VERSION everywhere.
The new one, if you use the builtin make file to "make branch.tar" will also create just such a file
gl-install copies
- the initial rc file to ~/.gitolite.rc if it doesn't exist
- src and hooks to GL_ADMINDIR
Make it aware of a package-based setup sequence, where the above two
change somewhat; see code diff.
This should be the last bit of change needed to prepare gitolite setup
so that a distro package maintainer does not have to fiddle too much
with code inside.
(What remains is docs, and a setup script for server-side use, to
replace the latter part of easy install)
if you have read access to the admin repo, you can say
ssh git@server info user1 [...]
Original idea and code by Karteek E. The motivation is to quickly and
easily check what perms a user has. Technically nothing that you can't
glean from the config file itself but it serves as a double check or a
mild debugging aid perhaps.
However note that the branch level rules are much more complex and they
do not, as yet, have any such "helpful" aids. Life is like that
sometimes.
Gitolite allows you to set git repo options using the "config" keyword;
see conf/example.conf for details and syntax.
However, if you are in an installation where the repo admin does not
(and should not) have shell access to the server, then allowing him to
set arbitrary repo config options *may* be a security risk -- some
config settings may allow executing arbitrary commands.
This patch fixes it, introducing a new RC variable to control the
behaviour. See conf/example.gitolite.rc for details
Although I have washed my hands off the security aspect if you use
external commands, that doesn't mean I won't make them as tight as I can
;-) Right now, this is just a place holder -- if people use it and
complain that the pattern is too restrictive, I'll change it.
The wildrepos branch has been merged into master, and deleted. It will no
longer exist as a separate branch. Instead, a new variable
called $GL_WILDREPOS has been added which acts as a switch; when
off (which is the default), many wildrepos features are disabled.
(the "C" permissions, and the getperms (etc.) commands mainly).
Important: if you are using wildrepos, please set "$GL_WILDREPOS = 1;" in
the RC file when you upgrade to this version (or just before you do the
upgrade).
Allow users to set and display description (for gitweb) for their
own wildcard repositories using ssh commands:
setdesc <repo>
getdesc <repo>
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
brought on by realising that you lost $shell_allowed when refactoring
(previous commit) but perl hadn't caught it because -- damn -- you
didn't have "use strict" in gitolite.pm
lots of conflicts, esp in gl-auth-command, due to refactoring the
"special commands" stuff on master
Conflicts:
doc/3-faq-tips-etc.mkd
src/gitolite.pm
src/gl-auth-command
src/gl-compile-conf
