osd-contiki/platform/avr-ravenusb/contiki-conf.h
2010-03-02 16:25:47 +00:00

179 lines
5.5 KiB
C

/*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$$
*/
/**
* \file
* Configuration for sample STK 501 Contiki kernel
*
* \author
* Simon Barner <barner@in.tum.de
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#include <stdint.h>
typedef int32_t s32_t;
/*
* MCU and clock rate
*/
#define MCU_MHZ 8
#define PLATFORM PLATFORM_AVR
#define RAVEN_REVISION RAVENUSB_C
/* Cock ticks per second */
#define CLOCK_CONF_SECOND 125
/* Maximum time interval (used for timers) */
#define INFINITE_TIME 0xffff
/* COM port to be used for SLIP connection */
#define SLIP_PORT RS232_PORT_0
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
#define MMEM_CONF_SIZE 256
/* Use the following address for code received via the codeprop
* facility
*/
#define EEPROMFS_ADDR_CODEPROP 0x8000
/* Use Atmel 'Route Under MAC', currently just in sniffer mode! */
//#define UIP_CONF_USE_RUM 1
#define CCIF
#define CLIF
#define RIMEADDR_CONF_SIZE 8
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#define UIP_CONF_LL_802154 1
#define UIP_CONF_LLH_LEN 14
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 4
#define UIP_CONF_IP_FORWARD 0
#define UIP_CONF_FWCACHE_SIZE 0
#define UIP_CONF_IPV6 1
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_QUEUE_PKT 0
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_TCP 1
#define UIP_CONF_TCP_SPLIT 1
#define UIP_CONF_STATISTICS 1
#ifdef RF230BB
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //for barebones driver, sicslowpan calls radio->read function
#if 1 /* Network setup */
/* No radio cycling */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC sicslowmac_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO rf230_driver
#define RF230_CONF_AUTOACK 1
#define RF230_CONF_AUTORETRIES 2
#define QUEUEBUF_CONF_NUM 1
#define QUEUEBUF_CONF_REF_NUM 1
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 5
#elif 0
/* Contiki-mac radio cycling */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC contikimac_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO rf230_driver
#define RF230_CONF_AUTOACK 0
#define RF230_CONF_AUTORETRIES 0
#elif 0
/* cx-mac radio cycling */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC cxmac_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO rf230_driver
#define RF230_CONF_AUTOACK 0
#define RF230_CONF_AUTORETRIES 0
#define MAC_CONF_CHANNEL_CHECK_RATE 8
#define SICSLOWPAN_CONF_FRAG 1
#define QUEUEBUF_CONF_NUM 4
#define QUEUEBUF_CONF_REF_NUM 2
#define SICSLOWPAN_CONF_MAXAGE 5
//following gives 50% duty cycle, undef for default 5%
#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 16)
#else
#error Network configuration not specified!
#endif /* Network setup */
#endif /* RF230BB */
/* Route-Under-MAC uses 16-bit short addresses */
#if UIP_CONF_USE_RUM
#undef UIP_CONF_LL_802154
#define UIP_DATA_RUM_OFFSET 5
#endif
typedef unsigned short clock_time_t;
typedef unsigned char u8_t;
typedef unsigned short u16_t;
typedef unsigned long u32_t;
typedef unsigned short uip_stats_t;
typedef unsigned long off_t;
void clock_delay(unsigned int us2);
void clock_wait(int ms10);
void clock_set_seconds(unsigned long s);
unsigned long clock_seconds(void);
#endif /* __CONTIKI_CONF_H__ */