osd-contiki/platform/econotag/contiki-conf.h
Mariano Alvira fb8bbf37cf Use the RTC only as the main timer.
This is a major change to how the main tick interrupt is handled on
the mc1322x platforms. Instead of using two timer resources, TMR0 and
RTC, this patch unifies all the timers to use the RTC. This is enabled by
implementing etimers as scheduled rtimers. The main advantage (aside
from freeing TMR0 for general use) is have the Contiki timebase come
from the same source that will be used for sleeping and wakeup.
2013-02-03 15:15:05 -05:00

243 lines
7.4 KiB
C

/*
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
* to the MC1322x project (http://mc1322x.devl.org) and Contiki.
*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$$
*/
/**
* \file
* Configuration for Econotag
*
* \author
* Original by:
* Simon Barner <barner@in.tum.de>
* This version by:
* Mariano Alvira <mar@devl.org>
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#include <stdint.h>
/* mc1322x files */
#include "contiki-mc1322x-conf.h"
/* Econotag I tune parameters */
#define ECONOTAG_CTUNE_4PF 1
/* Coarse tune: add 0-15 pf (CTUNE is 4 bits) */
#define ECONOTAG_CTUNE 11
/* Fine tune: add FTUNE * 156fF (FTUNE is 5bits) */
#define ECONOTAG_FTUNE 7
/* M12 tune parameters */
#define M12_CTUNE_4PF 1
#define M12_CTUNE 3
#define M12_FTUNE 3
/* the econotag platform will correctly detect an Econotag I (no M12) vs. Econotag II (w/M12) */
/* and trim the main crystal accordingly */
/* this detection will be incorrect if you populate the 32.768kHz crystal on the Econotag I */
/* In that case, you should FORCE_ECONOTAG_I below */
#define FORCE_ECONOTAG_I 0
/* if you define a serial number then it will be used to comput the mac address */
/* otherwise, a random mac address in the Redwire development IAB will be used */
/* #define M12_CONF_SERIAL 0x000000 */
/* Clock ticks per second */
#define CLOCK_CONF_SECOND 100
#define CCIF
#define CLIF
#define CONSOLE_UART UART1
#define CONSOLE_BAUD 115200
#define dbg_putchar(x) uart1_putc(x)
#define USE_FORMATTED_STDIO 1
#define MACA_DEBUG 0
#define CONTIKI_MACA_RAW_MODE 0
#define BLOCKING_TX 1
#define MACA_AUTOACK 1
#define NULLRDC_CONF_802154_AUTOACK_HW 1
#define USE_WDT 0
#ifndef WDT_TIMEOUT
#define WDT_TIMEOUT 5000 /* watchdog timeout in ms */
#endif
/* end of mc1322x specific config. */
/* start of conitki config. */
#define PLATFORM_HAS_LEDS 1
#define PLATFORM_HAS_BUTTON 1
#define RIMEADDR_CONF_SIZE 8
#if WITH_UIP6
/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO contiki_maca_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
#define CXMAC_CONF_ANNOUNCEMENTS 0
#define XMAC_CONF_ANNOUNCEMENTS 0
#else /* WITH_UIP6 */
/* Network setup for non-IPv6 (rime). */
#define NETSTACK_CONF_NETWORK rime_driver
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_CONF_RDC sicslowmac_driver
#define NETSTACK_CONF_RADIO contiki_maca_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
#define COLLECT_CONF_ANNOUNCEMENTS 1
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
#define CXMAC_CONF_ANNOUNCEMENTS 0
#define XMAC_CONF_ANNOUNCEMENTS 0
#define CONTIKIMAC_CONF_ANNOUNCEMENTS 0
#define CONTIKIMAC_CONF_COMPOWER 0
#define XMAC_CONF_COMPOWER 0
#define CXMAC_CONF_COMPOWER 0
#define COLLECT_NEIGHBOR_CONF_MAX_NEIGHBORS 32
#endif /* WITH_UIP6 */
#define QUEUEBUF_CONF_NUM 16
#define PACKETBUF_CONF_ATTRS_INLINE 1
#ifndef RF_CHANNEL
#define RF_CHANNEL 26
#endif /* RF_CHANNEL */
#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT 0
#define IEEE802154_CONF_PANID 0xABCD
#define PROFILE_CONF_ON 0
#define ENERGEST_CONF_ON 0
#define AODV_COMPLIANCE
#define AODV_NUM_RT_ENTRIES 32
#define WITH_ASCII 1
#define PROCESS_CONF_NUMEVENTS 8
#define PROCESS_CONF_STATS 1
#ifdef WITH_UIP6
#define RIMEADDR_CONF_SIZE 8
#define UIP_CONF_LL_802154 1
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_ROUTER 1
#define UIP_CONF_IPV6_RPL 1
#define UIP_CONF_DS6_NBR_NBU 30
#define UIP_CONF_DS6_ROUTE_NBU 30
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_ND6_REACHABLE_TIME 600000
#define UIP_CONF_ND6_RETRANS_TIMER 10000
#define UIP_CONF_IPV6 1
#define UIP_CONF_IPV6_QUEUE_PKT 0
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#define UIP_CONF_IP_FORWARD 0
#define UIP_CONF_BUFFER_SIZE 1300
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 8
#define SICSLOWPAN_CONF_COMPRESSION_IPV6 0
#define SICSLOWPAN_CONF_COMPRESSION_HC1 1
#define SICSLOWPAN_CONF_COMPRESSION_HC01 2
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 8
#endif /* SICSLOWPAN_CONF_FRAG */
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#else /* WITH_UIP6 */
#define UIP_CONF_IP_FORWARD 1
#define UIP_CONF_BUFFER_SIZE 1300
#endif /* WITH_UIP6 */
#define UIP_CONF_ICMP_DEST_UNREACH 1
#define UIP_CONF_DHCP_LIGHT
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_RECEIVE_WINDOW 48
#define UIP_CONF_TCP_MSS 48
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 8
#define UIP_CONF_UDP_CONNS 12
#define UIP_CONF_FWCACHE_SIZE 30
#define UIP_CONF_BROADCAST 1
#define UIP_ARCH_IPCHKSUM 1
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_PINGADDRCONF 0
#define UIP_CONF_LOGGING 0
#define UIP_CONF_TCP_SPLIT 0
/* include the project config */
/* PROJECT_CONF_H might be defined in the project Makefile */
#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */
#endif /* __CONTIKI_CONF_H__ */