osd-contiki/cpu/cc2538/dev/ssi.h
Benoît Thébaudeau c76b8235f4 cc2538: spi: Add support for dynamic instances
Previously, only constants could be used to pass SPI instances to the
SPI driver. This change makes it possible to use SPI instances from
variables.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:43 +01:00

192 lines
11 KiB
C

/*
* Copyright (c) 2013, University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* \addtogroup cc2538
* @{
*
* \defgroup cc2538-spi cc2538 Synchronous Serial Interface
*
* Driver for the cc2538 SPI peripheral
*
* Register and bitmask definitions based on the Foundation Firmware from
* Texas Instruments.
* @{
*
* \file
* Header file for the cc2538 Synchronous Serial Interface
*/
#ifndef SSI_H_
#define SSI_H_
/*---------------------------------------------------------------------------*/
/** \name Number of SSI instances supported by this CPU.
* @{
*/
#define SSI_INSTANCE_COUNT 2
/** @} */
/*---------------------------------------------------------------------------*/
/** \name Base register memory locations.
* @{
*/
#define SSI0_BASE 0x40008000 /**< Base address for SSI0 */
#define SSI1_BASE 0x40009000 /**< Base address for SSI1 */
/** Base address of the \c dev instance of the SSI */
#define SSI_BASE(dev) (SSI0_BASE + (dev) * (SSI1_BASE - SSI0_BASE))
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SSI register offsets
* @{
*/
#define SSI_CR0 0x00000000 /**< Control register 0 */
#define SSI_CR1 0x00000004 /**< Control register 1 */
#define SSI_DR 0x00000008 /**< Access the TX and RX FIFO */
#define SSI_SR 0x0000000C /**< Meta information about FIFO */
#define SSI_CPSR 0x00000010 /**< Clock divider */
#define SSI_IM 0x00000014 /**< Interrupt mask */
#define SSI_RIS 0x00000018 /**< Raw interrupt status */
#define SSI_MIS 0x0000001C /**< Masked interrupt status */
#define SSI_ICR 0x00000020 /**< Interrupt clear register */
#define SSI_DMACTL 0x00000024 /**< DMA control register */
#define SSI_CC 0x00000FC8 /**< Clock configuration */
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SSI Bitmasks and shifts
* @{
*/
#define SSI_CR0_SCR_M 0x0000FF00 /**< Serial clock rate mask */
#define SSI_CR0_SCR_S 8 /**< Serial clock rate shift */
#define SSI_CR0_SPH_M 0x00000080 /**< Serial clock phase (H) mask */
#define SSI_CR0_SPH_S 7 /**< Serial clock phase (H) shift */
#define SSI_CR0_SPO_M 0x00000040 /**< Serial clock phase (O) mask */
#define SSI_CR0_SPO_S 6 /**< Serial clock phase (O) shift */
#define SSI_CR0_FRF_M 0x00000030 /**< Frame format select mask */
#define SSI_CR0_FRF_S 4 /**< Frame format select shift */
#define SSI_CR0_DSS_M 0x0000000F /**< Data size select mask */
#define SSI_CR0_DSS_S 0 /**< Data size select shift */
#define SSI_CR1_SOD_M 0x00000008 /**< Slave mode output disable mask */
#define SSI_CR1_SOD_S 3 /**< Slave mode output disable shift */
#define SSI_CR1_MS_M 0x00000004 /**< Master and slave select mask */
#define SSI_CR1_MS_S 2 /**< Master and slave select shift */
#define SSI_CR1_SSE_M 0x00000002 /**< Synchronous serial port enable mask */
#define SSI_CR1_SSE_S 1 /**< Synchronous serial port enable shift */
#define SSI_CR1_LBM_M 0x00000001 /**< Loop-back mode mask */
#define SSI_CR1_LBM_S 0 /**< Loop-back mode shift */
#define SSI_DR_DATA_M 0x0000FFFF /**< FIFO data mask */
#define SSI_DR_DATA_S 0 /**< FIFO data shift */
#define SSI_SR_BSY_M 0x00000010 /**< Busy bit mask */
#define SSI_SR_BSY_S 4 /**< Busy bit shift */
#define SSI_SR_RFF_M 0x00000008 /**< Receive FIFO full mask */
#define SSI_SR_RFF_S 3 /**< Receive FIFO full shift */
#define SSI_SR_RNE_M 0x00000004 /**< Receive FIFO not empty mask */
#define SSI_SR_RNE_S 2 /**< Receive FIFO not empty shift */
#define SSI_SR_TNF_M 0x00000002 /**< Transmit FIFO not full mask */
#define SSI_SR_TNF_S 1 /**< Transmit FIFO not full shift */
#define SSI_SR_TFE_M 0x00000001 /**< Transmit FIFO empty mask */
#define SSI_SR_TFE_S 0 /**< Transmit FIFO empty shift */
#define SSI_CPSR_CPSDVSR_M 0x000000FF /**< Clock prescale divisor mask */
#define SSI_CPSR_CPSDVSR_S 0 /**< Clock prescale divisor shift */
#define SSI_IM_TXIM_M 0x00000008 /**< Transmit FIFO interrupt mask mask */
#define SSI_IM_TXIM_S 3 /**< Transmit FIFO interrupt mask shift */
#define SSI_IM_RXIM_M 0x00000004 /**< Receive FIFO interrupt mask mask */
#define SSI_IM_RXIM_S 2 /**< Receive FIFO interrupt mask shift */
#define SSI_IM_RTIM_M 0x00000002 /**< Receive time-out interrupt mask mask */
#define SSI_IM_RTIM_S 1 /**< Receive time-out interrupt mask shift */
#define SSI_IM_RORIM_M 0x00000001 /**< Receive overrun interrupt mask mask */
#define SSI_IM_RORIM_S 0 /**< Receive overrun interrupt mask shift */
#define SSI_RIS_TXRIS_M 0x00000008 /**< SSITXINTR raw state mask */
#define SSI_RIS_TXRIS_S 3 /**< SSITXINTR raw state shift */
#define SSI_RIS_RXRIS_M 0x00000004 /**< SSIRXINTR raw state mask */
#define SSI_RIS_RXRIS_S 2 /**< SSIRXINTR raw state shift */
#define SSI_RIS_RTRIS_M 0x00000002 /**< SSIRTINTR raw state mask */
#define SSI_RIS_RTRIS_S 1 /**< SSIRTINTR raw state shift */
#define SSI_RIS_RORRIS_M 0x00000001 /**< SSIRORINTR raw state mask */
#define SSI_RIS_RORRIS_S 0 /**< SSIRORINTR raw state shift */
#define SSI_MIS_TXMIS_M 0x00000008 /**< SSITXINTR masked state mask */
#define SSI_MIS_TXMIS_S 3 /**< SSITXINTR masked state shift */
#define SSI_MIS_RXMIS_M 0x00000004 /**< SSIRXINTR masked state mask */
#define SSI_MIS_RXMIS_S 2 /**< SSIRXINTR masked state shift */
#define SSI_MIS_RTMIS_M 0x00000002 /**< SSIRTINTR masked state mask */
#define SSI_MIS_RTMIS_S 1 /**< SSIRTINTR masked state shift */
#define SSI_MIS_RORMIS_M 0x00000001 /**< SSIRORINTR masked state mask */
#define SSI_MIS_RORMIS_S 0 /**< SSIRORINTR masked state shift */
#define SSI_ICR_RTIC_M 0x00000002 /**< Receive time-out interrupt clear mask */
#define SSI_ICR_RTIC_S 1 /**< Receive time-out interrupt clear shift */
#define SSI_ICR_RORIC_M 0x00000001 /**< Receive overrun interrupt clear mask */
#define SSI_ICR_RORIC_S 0 /**< Receive overrun interrupt clear shift */
#define SSI_DMACTL_TXDMAE_M 0x00000002 /**< Transmit DMA enable mask */
#define SSI_DMACTL_TXDMAE_S 1 /**< Transmit DMA enable shift */
#define SSI_DMACTL_RXDMAE_M 0x00000001 /**< Receive DMA enable mask */
#define SSI_DMACTL_RXDMAE_S 0 /**< Receive DMA enable shift */
#define SSI_CC_CS_M 0x00000007 /**< Baud and system clock source mask */
#define SSI_CC_CS_S 0 /**< Baud and system clock source shift */
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SSI Register Values
* @{
*/
#define SSI_CR0_SPH 0x00000080 /**< Serial clock phase (H) */
#define SSI_CR0_SPO 0x00000040 /**< Serial clock phase (O) */
#define SSI_CR0_FRF_MOTOROLA 0x00000000 /**< Motorola frame format */
#define SSI_CR0_FRF_TI 0x00000010 /**< Texas Instruments frame format */
#define SSI_CR0_FRF_MICROWIRE 0x00000020 /**< National Microwire frame format */
#define SSI_CR1_SOD 0x00000008 /**< Slave mode output disable */
#define SSI_CR1_MS 0x00000004 /**< Master and slave select */
#define SSI_CR1_SSE 0x00000002 /**< Synchronous serial port enable */
#define SSI_CR1_LBM 0x00000001 /**< Loop-back mode */
#define SSI_SR_BSY 0x00000010 /**< Busy bit */
#define SSI_SR_RFF 0x00000008 /**< Receive FIFO full */
#define SSI_SR_RNE 0x00000004 /**< Receive FIFO not empty */
#define SSI_SR_TNF 0x00000002 /**< Transmit FIFO not full */
#define SSI_SR_TFE 0x00000001 /**< Transmit FIFO empty */
#define SSI_IM_TXIM 0x00000008 /**< Transmit FIFO interrupt mask */
#define SSI_IM_RXIM 0x00000004 /**< Receive FIFO interrupt mask */
#define SSI_IM_RTIM 0x00000002 /**< Receive time-out interrupt mask */
#define SSI_IM_RORIM 0x00000001 /**< Receive overrun interrupt mask */
#define SSI_RIS_TXRIS 0x00000008 /**< SSITXINTR raw state */
#define SSI_RIS_RXRIS 0x00000004 /**< SSIRXINTR raw state */
#define SSI_RIS_RTRIS 0x00000002 /**< SSIRTINTR raw state */
#define SSI_RIS_RORRIS 0x00000001 /**< SSIRORINTR raw state */
#define SSI_MIS_TXMIS 0x00000008 /**< SSITXINTR masked state */
#define SSI_MIS_RXMIS 0x00000004 /**< SSIRXINTR masked state */
#define SSI_MIS_RTMIS 0x00000002 /**< SSIRTINTR masked state */
#define SSI_MIS_RORMIS 0x00000001 /**< SSIRORINTR masked state */
#define SSI_ICR_RTIC 0x00000002 /**< Receive time-out interrupt clear */
#define SSI_ICR_RORIC 0x00000001 /**< Receive overrun interrupt clear */
#define SSI_DMACTL_TXDMAE 0x00000002 /**< Transmit DMA enable */
#define SSI_DMACTL_RXDMAE 0x00000001 /**< Receive DMA enable */
/** @} */
#endif
/**
* @}
* @}
*/