osd-contiki/tools/stm32w/uip6_bridge
2012-10-26 15:54:49 +02:00
..
dev Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
bridge-conf.h Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
fakeuip.c Converted u8_t to uint8_t and u16_t to uint16_t in the docs and tools directories. 2012-02-21 08:33:25 -05:00
Makefile Added tools for STM32W. 2010-10-25 10:42:40 +00:00
README Added tools for STM32W. 2010-10-25 10:42:40 +00:00
sicslow_ethernet.c Added tools for STM32W. 2010-10-25 10:42:40 +00:00
sicslow_ethernet.h Added tools for STM32W. 2010-10-25 10:42:40 +00:00
uip6-bridge-tap.c Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t. 2012-04-09 15:49:53 -04:00

See siscslow_ethernet.c for information about translation between
802.15.4 and 802.3 addresses.
Devices must have a proper EUI-64 address for this bridge to work.
If the EUI-64 address of the devices cannot be changed and they are
incompatible with the translation mechanism, you have to change the
translation rules (they are defined in mac_createSicslowpanLongAddr()
and mac_createEthernetAddr()).

Usage example:

run tapslip6 (source file are located in tools folder).

./tapslip6 -p 2001:db8:bbbb:abce::/64

where 2001:db8:bbbb:abce:: is the network address and 64 is the the
prefix length. The remaining 64 bits will be derived from the EUI-64 (two
middle bytes will be removed).

You can also simply create an edge router in one of the network nodes:
you have to enable routing and set the appropriate forwarding rules, as 
shown in contiki-init-net.c. Then you have to add the corresponding
rule on your machine, for example:
route -A inet6 add 2001:db8:bbbb:abcd::/64 gw 2001:db8:bbbb:abce:
	280:e102::8a.
	
where 2001:db8:bbbb:abce:280:e102::6c is the address of the edge
node and 2001:db8:bbbb:abcd::/64 is the lowpan address.