04bbba6c12
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework *all* osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed.
240 lines
6.7 KiB
C
240 lines
6.7 KiB
C
/*
|
|
* Copyright (c) 2015 Bernhard Trinnes
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of the copyright holders nor the names of
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \file
|
|
*
|
|
* \brief
|
|
* Smart Grid Ready Module - guhRF
|
|
*
|
|
* \author
|
|
* Bernhard Trinnes bernhard.trinnes@guh.guru
|
|
guh Gmbh
|
|
*
|
|
*/
|
|
|
|
#include "sg-ready.h"
|
|
#include <util/delay.h>
|
|
|
|
|
|
#if DEBUG
|
|
#include <stdio.h>
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...)
|
|
#endif
|
|
|
|
|
|
|
|
/**
|
|
* \addtogroup relay
|
|
* \{
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief init RELAY PINS - direction & pull-ups
|
|
*/
|
|
void
|
|
sg_relay_init(uint8_t state)
|
|
{
|
|
/*2 latching dual coal relay
|
|
RELAY 1 Coil 1 PB4 - ON
|
|
Coil 2 PB5 - OFF
|
|
Feedback PD5
|
|
RELAY 2 Coil 1 PB6 - ON
|
|
Coil 2 PB7 - OFF
|
|
Feedback PD7
|
|
|
|
*/
|
|
|
|
PRINTF("SET DDRB\n");
|
|
DDRB |= (RELAY1_ON | RELAY1_OFF | RELAY2_ON | RELAY2_OFF);
|
|
PRINTF("SET PORTB\n");
|
|
PORTB &= ~(RELAY1_ON | RELAY1_OFF | RELAY2_ON | RELAY2_OFF);
|
|
|
|
PRINTF("SET DDRD\n");
|
|
DDRD &= ~(RELAY1_FB | RELAY2_FB);
|
|
PRINTF("SET PORTD\n");
|
|
PORTD |= (RELAY1_FB | RELAY2_FB);
|
|
|
|
PRINTF("SET STATE\n");
|
|
sg_set_state(state); // set default state - heat pump normal operation
|
|
}
|
|
|
|
/**
|
|
* \brief
|
|
*/
|
|
|
|
void
|
|
sg_set_state(uint8_t state)
|
|
{
|
|
/* State 1 - Relays 1:0
|
|
State 2 - Relays 0:0
|
|
State 3 - Relays 0:1
|
|
State 4 - Relays 1:1
|
|
uint8_t i = 0;
|
|
*/
|
|
uint8_t current_state;
|
|
|
|
PRINTF("GET STATE\n");
|
|
current_state = sg_get_state();
|
|
|
|
PRINTF("SET DIFFERENCE: %u %u\n", current_state, state);
|
|
sg_switch_difference(current_state, state);
|
|
|
|
|
|
|
|
/* while ( i<=3 || (current_state != state)){
|
|
i++;
|
|
sg_switch_difference(current_state, state);
|
|
current_state = sg_get_state();
|
|
}
|
|
*/
|
|
}
|
|
/**
|
|
* \brief
|
|
*/
|
|
|
|
|
|
uint8_t
|
|
sg_get_state()
|
|
{
|
|
uint8_t state;
|
|
/* Pull up -> Pin high = Relay Open */
|
|
if ((~PIND & RELAY1_FB) && (~PIND & RELAY2_FB)){
|
|
state = 4;
|
|
}else if (~PIND & RELAY1_FB){
|
|
state = 1;
|
|
} else if (~PIND & RELAY2_FB){
|
|
state = 3;
|
|
} else {
|
|
state = 2;
|
|
}
|
|
return state;
|
|
}
|
|
/**
|
|
* \brief
|
|
*/
|
|
|
|
void
|
|
sg_switch_difference(uint8_t old_state, uint8_t new_state)
|
|
{
|
|
switch(old_state) {
|
|
case 1:
|
|
switch(new_state) {
|
|
case 2:
|
|
PORTB |= RELAY1_OFF;
|
|
PORTB &= ~(RELAY1_ON | RELAY2_ON | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_OFF);
|
|
break;
|
|
case 3:
|
|
PORTB |= (RELAY1_OFF | RELAY2_ON );
|
|
PORTB &= ~(RELAY1_ON | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_OFF | RELAY2_ON);
|
|
break;
|
|
case 4:
|
|
PORTB |= RELAY2_ON;
|
|
PORTB &= ~(RELAY1_ON | RELAY1_OFF | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY2_ON);
|
|
break;
|
|
}
|
|
break;
|
|
case 2:
|
|
switch(new_state) {
|
|
case 1:
|
|
PORTB |= RELAY1_ON;
|
|
PORTB &= ~(RELAY1_OFF | RELAY2_ON | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_ON);
|
|
break;
|
|
case 3:
|
|
PORTB |= (RELAY2_ON);
|
|
PORTB &= ~(RELAY1_ON | RELAY1_OFF | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY2_ON);
|
|
break;
|
|
case 4:
|
|
PORTB |= (RELAY1_ON | RELAY2_ON);
|
|
PORTB &= ~(RELAY1_OFF | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_ON | RELAY2_ON);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
case 3:
|
|
switch(new_state) {
|
|
case 1:
|
|
PORTB |= (RELAY1_ON | RELAY2_OFF);
|
|
PORTB &= ~(RELAY1_OFF | RELAY2_ON);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_ON | RELAY2_OFF);
|
|
break;
|
|
case 2:
|
|
PORTB |= RELAY2_OFF;
|
|
PORTB &= ~(RELAY1_ON | RELAY1_OFF | RELAY2_ON);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY2_OFF);
|
|
break;
|
|
case 4:
|
|
PORTB |= RELAY1_ON;
|
|
PORTB &= ~(RELAY1_OFF | RELAY2_ON | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_ON);
|
|
break;
|
|
}
|
|
break;
|
|
case 4:
|
|
switch(new_state) {
|
|
case 1:
|
|
PORTB |= RELAY2_OFF;
|
|
PORTB &= ~(RELAY1_ON | RELAY1_OFF | RELAY2_ON);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY2_OFF);
|
|
break;
|
|
case 2:
|
|
PORTB |= (RELAY1_OFF | RELAY2_OFF);
|
|
PORTB &= ~(RELAY1_ON | RELAY2_ON );
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_OFF | RELAY2_OFF);
|
|
break;
|
|
case 3:
|
|
PORTB |= RELAY1_OFF;
|
|
PORTB &= ~(RELAY1_ON | RELAY2_ON | RELAY2_OFF);
|
|
_delay_us(LATCH_TIME);
|
|
PORTB &= ~(RELAY1_OFF);
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|