osd-contiki/cpu/avr/dev/optriac-sensor.c
Ralf Schlatterbeck 04bbba6c12 Multi-platform support, osd-merkur-{128,256}
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is
now osd-merkur-128. Also check that everything is consistent.
Add both platforms to the regression tests.
Move redundant files in platform dev directory of both platforms to
cpu/avr/dev. Note that this probably needs some rework. Already
discovered some inconsistency in io definitions of both devices in the
avr/io.h includes. Added a workaround in the obvious cases.
The platform makefiles now set correct parameters for bootloader and for
reading mac-address from flash memory.
Factor the flash programming into cpu/avr and platform/osd-merkur* and
rework *all* osd example makefiles to use the new settings. Also update
all the flash.sh and run.sh to use the new settings.
The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:59:40 +02:00

102 lines
3.1 KiB
C

/*
* Copyright (c) , Harald Pichler.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)$Id: servo-sensor.c,v 1.0 2013/02/20 19:34:06 nifi Exp $
*/
/**
* \file
* optriac sensor header file for Atmega128rfa1.
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include "Arduino.h"
#include "dev/optriac-sensor.h"
#define PRINTF(...) printf(__VA_ARGS__)
const struct sensors_sensor optriac_sensor;
static int status(int type);
static int enabled = 0;
static int optriac[2]={0,0};
static int optriacpin[8]={OPTRIAC_PIN_1,OPTRIAC_PIN_2};
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
return optriac[type];
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int c)
{
switch(type) {
case SENSORS_ACTIVE:
if(c) {
if(!status(SENSORS_ACTIVE)) {
pinMode(optriacpin[OPTRIAC_SENSOR_1], OUTPUT);
digitalWrite(optriacpin[OPTRIAC_SENSOR_1], LOW);
pinMode(optriacpin[OPTRIAC_SENSOR_2], OUTPUT);
digitalWrite(optriacpin[OPTRIAC_SENSOR_2], LOW);
enabled = 1;
}
} else {
enabled = 1;
}
break;
case OPTRIAC_SENSOR_1:
case OPTRIAC_SENSOR_2:
if(c==0){
digitalWrite(optriacpin[type], LOW);
optriac[type]=0;
}else{
digitalWrite(optriacpin[type], HIGH);
optriac[type]=1;
};
break;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
switch(type) {
case SENSORS_ACTIVE:
case SENSORS_READY:
return enabled;
}
return 0;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(optriac_sensor, OPTRIAC_SENSOR, value, configure, status);