deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/examples/z1/ipv6/z1-websense
History
Adam Dunkels 0b805e4763 Moved the cc2420 driver into a separate dev/cc2420 module
2014-01-26 23:20:27 +01:00
..
example-sky-websense.csc Renamed Java packages to match our contiki-os.org domain. Note that this commit does not affect external dependencies 2013-11-20 16:43:27 +01:00
Makefile Stop setting WITH_UIP6=1 in example Makefiles 2013-11-20 14:52:32 +00:00
Makefile.target
project-conf.h A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
README.md
websense-remote.c
wget.c Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
wget.h A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
z1-websense.c Moved the cc2420 driver into a separate dev/cc2420 module 2014-01-26 23:20:27 +01:00

README.md

Z1 websense

This example features a simple webserver running on top of the IPv6 contiki stack on Zolertia Z1 motes to provide sensor values, and with a RPL border router to bridge the sensor network to Internet.

To test the example in COOJA under Linux

  1. Start COOJA and load the simulation "example-z1-websense.csc"

    make TARGET=cooja example-z1-websense.csc

  2. Connect to the COOJA simulation using tunslip6:

    make connect-router-cooja

  3. You should now be able to browse to the nodes using your web browser: Router: http://[aaaa::0212:7401:0001:0101]/ Node 2: http://[aaaa::0212:7402:0002:0202]/

To run the example on real nodes under Linux

  1. Program the nodes with the websense application

    make TARGET=z1 z1-websense.upload

  2. Disconnect the nodes and program one node with the RPL border router

    cd ../rpl-border-router && make TARGET=z1 border-router.upload

  3. Connect to the border router using tunslip6:

    make connect-router

  4. Reboot the router and note the router IP address

  5. You should now be able to browse to your router node using your web browser: http://[]/. On this page you should see a list of all accessible nodes with their IP adresses.