osd-contiki/examples/ipv6/native-border-router/slip-dev.c

429 lines
11 KiB
C

/*
* Copyright (c) 2001, Adam Dunkels.
* Copyright (c) 2009, 2010 Joakim Eriksson, Niclas Finne, Dogan Yazar.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/* Below define allows importing saved output into Wireshark as "Raw IP" packet type */
#define WIRESHARK_IMPORT_FORMAT 1
#include "contiki.h"
#include "net/uip.h"
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <time.h>
#include <sys/types.h>
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <errno.h>
#include <err.h>
#include "net/netstack.h"
#include "net/packetbuf.h"
#include "cmd.h"
extern int slip_config_verbose;
extern const char *slip_config_ipaddr;
extern int slip_config_flowcontrol;
extern const char *slip_config_siodev;
extern uint16_t slip_config_basedelay;
extern speed_t slip_config_b_rate;
int devopen(const char *dev, int flags);
static FILE *inslip;
/* for statistics */
long slip_sent = 0;
long slip_received = 0;
int slipfd = 0;
void slip_send(int fd, unsigned char c);
//#define PROGRESS(s) fprintf(stderr, s)
#define PROGRESS(s) do { } while(0)
#define SLIP_END 0300
#define SLIP_ESC 0333
#define SLIP_ESC_END 0334
#define SLIP_ESC_ESC 0335
/*---------------------------------------------------------------------------*/
int
is_sensible_string(const unsigned char *s, int len)
{
int i;
for(i = 1; i < len; i++) {
if(s[i] == 0 || s[i] == '\r' || s[i] == '\n' || s[i] == '\t') {
continue;
} else if(s[i] < ' ' || '~' < s[i]) {
return 0;
}
}
return 1;
}
/*---------------------------------------------------------------------------*/
void
slip_packet_input(unsigned char *data, int len)
{
packetbuf_copyfrom(data, len);
if(slip_config_verbose > 0) {
printf("Packet input over SLIP: %d\n", len);
}
NETSTACK_RDC.input();
}
/*---------------------------------------------------------------------------*/
/*
* Read from serial, when we have a packet call slip_packet_input. No output
* buffering, input buffered by stdio.
*/
void
serial_input(FILE *inslip)
{
static union {
unsigned char inbuf[2000];
} uip;
static int inbufptr = 0;
int ret,i;
unsigned char c;
#ifdef linux
ret = fread(&c, 1, 1, inslip);
if(ret == -1 || ret == 0) err(1, "serial_input: read");
goto after_fread;
#endif
read_more:
if(inbufptr >= sizeof(uip.inbuf)) {
fprintf(stderr, "*** dropping large %d byte packet\n", inbufptr);
inbufptr = 0;
}
ret = fread(&c, 1, 1, inslip);
#ifdef linux
after_fread:
#endif
if(ret == -1) {
err(1, "serial_input: read");
}
if(ret == 0) {
clearerr(inslip);
return;
}
slip_received++;
switch(c) {
case SLIP_END:
if(inbufptr > 0) {
if(uip.inbuf[0] == '!') {
cmd_input(uip.inbuf, inbufptr);
} else if(uip.inbuf[0] == '?') {
#define DEBUG_LINE_MARKER '\r'
} else if(uip.inbuf[0] == DEBUG_LINE_MARKER) {
fwrite(uip.inbuf + 1, inbufptr - 1, 1, stdout);
} else if(is_sensible_string(uip.inbuf, inbufptr)) {
if(slip_config_verbose == 1) { /* strings already echoed below for verbose>1 */
fwrite(uip.inbuf, inbufptr, 1, stdout);
}
} else {
if(slip_config_verbose > 2) {
printf("Packet from SLIP of length %d - write TUN\n", inbufptr);
if(slip_config_verbose > 4) {
#if WIRESHARK_IMPORT_FORMAT
printf("0000");
for(i = 0; i < inbufptr; i++) printf(" %02x", uip.inbuf[i]);
#else
printf(" ");
for(i = 0; i < inbufptr; i++) {
printf("%02x", uip.inbuf[i]);
if((i & 3) == 3) printf(" ");
if((i & 15) == 15) printf("\n ");
}
#endif
printf("\n");
}
}
slip_packet_input(uip.inbuf, inbufptr);
}
inbufptr = 0;
}
break;
case SLIP_ESC:
if(fread(&c, 1, 1, inslip) != 1) {
clearerr(inslip);
/* Put ESC back and give up! */
ungetc(SLIP_ESC, inslip);
return;
}
switch(c) {
case SLIP_ESC_END:
c = SLIP_END;
break;
case SLIP_ESC_ESC:
c = SLIP_ESC;
break;
}
/* FALLTHROUGH */
default:
uip.inbuf[inbufptr++] = c;
/* Echo lines as they are received for verbose=2,3,5+ */
/* Echo all printable characters for verbose==4 */
if(slip_config_verbose == 4) {
if(c == 0 || c == '\r' || c == '\n' || c == '\t' || (c >= ' ' && c <= '~')) {
fwrite(&c, 1, 1, stdout);
}
} else if(slip_config_verbose >= 2) {
if(c == '\n' && is_sensible_string(uip.inbuf, inbufptr)) {
fwrite(uip.inbuf, inbufptr, 1, stdout);
inbufptr = 0;
}
}
break;
}
goto read_more;
}
unsigned char slip_buf[2000];
int slip_end, slip_begin;
/*---------------------------------------------------------------------------*/
void
slip_send(int fd, unsigned char c)
{
if(slip_end >= sizeof(slip_buf)) {
err(1, "slip_send overflow");
}
slip_buf[slip_end] = c;
slip_end++;
slip_sent++;
}
/*---------------------------------------------------------------------------*/
int
slip_empty()
{
return slip_end == 0;
}
/*---------------------------------------------------------------------------*/
void
slip_flushbuf(int fd)
{
int n;
if(slip_empty()) {
return;
}
n = write(fd, slip_buf + slip_begin, slip_end - slip_begin);
if(n == -1 && errno != EAGAIN) {
err(1, "slip_flushbuf write failed");
} else if(n == -1) {
PROGRESS("Q"); /* Outqueueis full! */
} else {
slip_begin += n;
if(slip_begin == slip_end) {
slip_begin = slip_end = 0;
}
}
}
/*---------------------------------------------------------------------------*/
static void
write_to_serial(int outfd, const uint8_t *inbuf, int len)
{
const uint8_t *p = inbuf;
int i;
if(slip_config_verbose > 2) {
#ifdef __CYGWIN__
printf("Packet from WPCAP of length %d - write SLIP\n", len);
#else
printf("Packet from TUN of length %d - write SLIP\n", len);
#endif
if(slip_config_verbose > 4) {
#if WIRESHARK_IMPORT_FORMAT
printf("0000");
for(i = 0; i < len; i++) printf(" %02x", p[i]);
#else
printf(" ");
for(i = 0; i < len; i++) {
printf("%02x", p[i]);
if((i & 3) == 3) printf(" ");
if((i & 15) == 15) printf("\n ");
}
#endif
printf("\n");
}
}
/* It would be ``nice'' to send a SLIP_END here but it's not
* really necessary.
*/
/* slip_send(outfd, SLIP_END); */
for(i = 0; i < len; i++) {
switch(p[i]) {
case SLIP_END:
slip_send(outfd, SLIP_ESC);
slip_send(outfd, SLIP_ESC_END);
break;
case SLIP_ESC:
slip_send(outfd, SLIP_ESC);
slip_send(outfd, SLIP_ESC_ESC);
break;
default:
slip_send(outfd, p[i]);
break;
}
}
slip_send(outfd, SLIP_END);
PROGRESS("t");
}
/*---------------------------------------------------------------------------*/
/* writes an 802.15.4 packet to slip-radio */
void
write_to_slip(const uint8_t *buf, int len)
{
/* printf("Packet to SLIP: %d\n", len); */
write_to_serial(slipfd, buf, len);
}
/*---------------------------------------------------------------------------*/
static void
stty_telos(int fd)
{
struct termios tty;
speed_t speed = slip_config_b_rate;
int i;
if(tcflush(fd, TCIOFLUSH) == -1) err(1, "tcflush");
if(tcgetattr(fd, &tty) == -1) err(1, "tcgetattr");
cfmakeraw(&tty);
/* Nonblocking read. */
tty.c_cc[VTIME] = 0;
tty.c_cc[VMIN] = 0;
if(slip_config_flowcontrol) {
tty.c_cflag |= CRTSCTS;
} else {
tty.c_cflag &= ~CRTSCTS;
}
tty.c_cflag &= ~HUPCL;
tty.c_cflag &= ~CLOCAL;
cfsetispeed(&tty, speed);
cfsetospeed(&tty, speed);
if(tcsetattr(fd, TCSAFLUSH, &tty) == -1) err(1, "tcsetattr");
#if 1
/* Nonblocking read and write. */
/* if(fcntl(fd, F_SETFL, O_NONBLOCK) == -1) err(1, "fcntl"); */
tty.c_cflag |= CLOCAL;
if(tcsetattr(fd, TCSAFLUSH, &tty) == -1) err(1, "tcsetattr");
i = TIOCM_DTR;
if(ioctl(fd, TIOCMBIS, &i) == -1) err(1, "ioctl");
#endif
usleep(10*1000); /* Wait for hardware 10ms. */
/* Flush input and output buffers. */
if(tcflush(fd, TCIOFLUSH) == -1) err(1, "tcflush");
}
/*---------------------------------------------------------------------------*/
void
slip_init(void)
{
setvbuf(stdout, NULL, _IOLBF, 0); /* Line buffered output. */
if(slip_config_siodev != NULL) {
slipfd = devopen(slip_config_siodev, O_RDWR | O_NONBLOCK);
if(slipfd == -1) {
err(1, "can't open siodev ``/dev/%s''", slip_config_siodev);
}
} else {
static const char *siodevs[] = {
"ttyUSB0", "cuaU0", "ucom0" /* linux, fbsd6, fbsd5 */
};
int i;
for(i = 0; i < 3; i++) {
slip_config_siodev = siodevs[i];
slipfd = devopen(slip_config_siodev, O_RDWR | O_NONBLOCK);
if(slipfd != -1) {
break;
}
}
if(slipfd == -1) {
err(1, "can't open siodev");
}
}
fprintf(stderr, "********SLIP started on ``/dev/%s''\n", slip_config_siodev);
stty_telos(slipfd);
slip_send(slipfd, SLIP_END);
inslip = fdopen(slipfd, "r");
if(inslip == NULL) err(1, "main: fdopen");
}
/*---------------------------------------------------------------------------*/
int
slip_set_fd(int maxfd, fd_set *rset, fd_set *wset)
{
if(!slip_empty()) { /* Anything to flush? */
FD_SET(slipfd, wset);
}
FD_SET(slipfd, rset); /* Read from slip ASAP! */
if(slipfd > maxfd) maxfd = slipfd;
return maxfd;
}
/*---------------------------------------------------------------------------*/
void
slip_handle_fd(fd_set *rset, fd_set *wset)
{
if(FD_ISSET(slipfd, rset)) {
serial_input(inslip);
}
if(FD_ISSET(slipfd, wset)) {
slip_flushbuf(slipfd);
}
}