147 lines
4.1 KiB
Plaintext
147 lines
4.1 KiB
Plaintext
/*
|
|
* Sample arduino sketch using contiki features.
|
|
* We turn the LED off
|
|
* We allow read the moisture sensor
|
|
* Unfortunately sleeping for long times in loop() isn't currently
|
|
* possible, something turns off the CPU (including PWM outputs) if a
|
|
* Proto-Thread is taking too long. We need to find out how to sleep in
|
|
* a Contiki-compatible way.
|
|
* Note that for a normal arduino sketch you won't have to include any
|
|
* of the contiki-specific files here, the sketch should just work.
|
|
*/
|
|
|
|
#include <Wire.h>
|
|
#include "Adafruit_HTU21DF.h"
|
|
#include <OneWire.h>
|
|
#include "DallasTemperature.h"
|
|
|
|
extern "C" {
|
|
|
|
#include "arduino-process.h"
|
|
#include "rest-engine.h"
|
|
#include "sketch.h"
|
|
|
|
// Data wire is plugged into port 2 on the Arduino
|
|
#define ONE_WIRE_BUS 3
|
|
#define TEMPERATURE_PRECISION 9
|
|
|
|
// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
|
|
OneWire oneWire(ONE_WIRE_BUS);
|
|
|
|
// Pass our oneWire reference to Dallas Temperature.
|
|
DallasTemperature dsensors(&oneWire);
|
|
|
|
// arrays to hold device addresses
|
|
DeviceAddress outsideThermometer;
|
|
|
|
Adafruit_HTU21DF htu = Adafruit_HTU21DF();
|
|
|
|
extern resource_t res_htu21dtemp, res_htu21dhum, res_dtemp1, res_battery;
|
|
float htu21d_hum;
|
|
float htu21d_temp;
|
|
char htu21d_hum_s[8];
|
|
char htu21d_temp_s[8];
|
|
|
|
float d_temp;
|
|
char d_temp_s[8];
|
|
// sketch.h
|
|
struct dstemp ds1820[7];
|
|
|
|
#define LED_PIN 4
|
|
}
|
|
// main functions to print information about a device
|
|
void printAddress(uint8_t* adress)
|
|
{
|
|
printf("%02X",adress[0]);
|
|
printf("%02X",adress[1]);
|
|
printf("%02X",adress[2]);
|
|
printf("%02X",adress[3]);
|
|
printf("%02X",adress[4]);
|
|
printf("%02X",adress[5]);
|
|
printf("%02X",adress[6]);
|
|
printf("%02X",adress[7]);
|
|
}
|
|
|
|
// function to print the temperature for a device
|
|
void printTemperature(DeviceAddress deviceAddress,int index)
|
|
{
|
|
d_temp = dsensors.getTempC(deviceAddress);
|
|
dtostrf(d_temp , 0, 2, d_temp_s );
|
|
printf("Temp C: ");
|
|
printf("%s",d_temp_s);
|
|
// copy to structure
|
|
ds1820[index].ftemp=d_temp;
|
|
strcpy(ds1820[index].stemp, d_temp_s);
|
|
}
|
|
|
|
void printData(DeviceAddress deviceAddress, int index)
|
|
{
|
|
printf("Device Address: ");
|
|
printAddress(deviceAddress);
|
|
printf(" ");
|
|
printTemperature(deviceAddress,index);
|
|
printf("\n");
|
|
}
|
|
|
|
void setup (void)
|
|
{
|
|
// switch off the led
|
|
pinMode(LED_PIN, OUTPUT);
|
|
digitalWrite(LED_PIN, HIGH);
|
|
// ds1820 sensor
|
|
printf("Dallas Temperature IC Control Library Demo");
|
|
// Start up the library
|
|
dsensors.begin();
|
|
// locate devices on the bus
|
|
printf("Locating devices...\n");
|
|
printf("Found ");
|
|
printf("%d",dsensors.getDeviceCount());
|
|
printf(" devices.\n");
|
|
// report parasite power requirements
|
|
printf("Parasite power is: ");
|
|
if (dsensors.isParasitePowerMode()) printf("ON\n");
|
|
else printf("OFF\n");
|
|
if (!dsensors.getAddress(outsideThermometer, 0)) printf("Unable to find address for Device 0\n");
|
|
// show the addresses we found on the bus
|
|
printf("Device 0 Address: ");
|
|
printAddress(outsideThermometer);
|
|
printf("\n");
|
|
// set the resolution to 9 bit
|
|
dsensors.setResolution(outsideThermometer, 9);
|
|
printf("Device 0 Resolution: ");
|
|
printf("%d",dsensors.getResolution(outsideThermometer));
|
|
printf("\n");
|
|
|
|
// htu21d sensor
|
|
if (!htu.begin()) {
|
|
printf("Couldn't find sensor!");
|
|
}
|
|
// init coap resourcen
|
|
rest_init_engine ();
|
|
#pragma GCC diagnostic ignored "-Wwrite-strings"
|
|
rest_activate_resource (&res_htu21dtemp, "s/temp");
|
|
rest_activate_resource (&res_htu21dhum, "s/hum");
|
|
rest_activate_resource (&res_dtemp1, "s/tempd");
|
|
rest_activate_resource (&res_battery, "s/battery");
|
|
#pragma GCC diagnostic pop
|
|
}
|
|
|
|
// at project-conf.h
|
|
// LOOP_INTERVAL (20 * CLOCK_SECOND)
|
|
void loop (void)
|
|
{
|
|
dsensors.requestTemperatures();
|
|
// print the device information
|
|
printData(outsideThermometer,0);
|
|
|
|
htu21d_temp = htu.readTemperature();
|
|
htu21d_hum = htu.readHumidity();
|
|
|
|
dtostrf(htu21d_temp , 0, 2, htu21d_temp_s );
|
|
dtostrf(htu21d_hum , 0, 2, htu21d_hum_s );
|
|
|
|
// debug only
|
|
printf("Temp: %s",htu21d_temp_s);
|
|
printf("\t\tHum: %s\n",htu21d_hum_s);
|
|
}
|