deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/cpu/cc26xx-cc13xx/rf-core/rf-core.c
Jonas Olsson 01e36532c2 Add support for the CC13xx CPU 
This commit:

* Moves all cpu files from cpu/cc26xx to cpu/cc26xx-cc13xx
* Bumps the CC26xxware submodule to the latest TI release
* Adds CC13xxware as a submodule
* Adds support for sub-ghz mode / IEEE 802.15.4g
* Splits the driver into multiple files for clarity. We now have the following structure:
  * A common module that handles access to the RF core, interrupts etc
  * A module that takes care of BLE functionality
  * A netstack radio driver for IEEE mode (2.4GHz)
  * A netstack radio driver for PROP mode (sub-ghz - multiple bands)

This commit also adds tick suppression functionality, applicable to all chips of the CC26xx and CC13xx families. Instead waking up on every clock tick simply to increment our software counter, we now only wake up just in time to service the next scheduled etimer. ContikiMAC-triggered wakeups are unaffected.

Laslty, this commit also applies a number of minor changes:
* Addition of missing includes
* Removal of stub functions
* Removal of a woraround for a CC26xxware bug that has now been fixed
2015-08-23 19:54:42 +01:00

519 lines
16 KiB
C
Raw Blame History

/*
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup rf-core
* @{
*
* \file
* Implementation of the CC13xx/CC26xx RF core driver
*/
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
#include "dev/watchdog.h"
#include "sys/process.h"
#include "sys/energest.h"
#include "net/netstack.h"
#include "net/packetbuf.h"
#include "net/rime/rimestats.h"
#include "rf-core/rf-core.h"
#include "ti-lib.h"
/*---------------------------------------------------------------------------*/
/* RF core and RF HAL API */
#include "hw_rfc_dbell.h"
#include "hw_rfc_pwr.h"
/*---------------------------------------------------------------------------*/
/* RF Core Mailbox API */
#include "rf-core/api/mailbox.h"
#include "rf-core/api/common_cmd.h"
#include "rf-core/api/ble_cmd.h"
#include "rf-core/api/ieee_cmd.h"
#include "rf-core/api/data_entry.h"
#include "rf-core/api/ble_mailbox.h"
#include "rf-core/api/ieee_mailbox.h"
#include "rf-core/api/prop_mailbox.h"
#include "rf-core/api/prop_cmd.h"
/*---------------------------------------------------------------------------*/
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
/*---------------------------------------------------------------------------*/
#define DEBUG 0
#if DEBUG
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
#ifdef __GNUC__
#define CC_ALIGN_ATTR(n) __attribute__ ((aligned(n)))
#else
#define CC_ALIGN_ATTR(n)
#endif
/*---------------------------------------------------------------------------*/
#ifdef RF_CORE_CONF_DEBUG_CRC
#define RF_CORE_DEBUG_CRC RF_CORE_CONF_DEBUG_CRC
#else
#define RF_CORE_DEBUG_CRC DEBUG
#endif
/*---------------------------------------------------------------------------*/
/* RF interrupts */
#define RX_FRAME_IRQ IRQ_RX_ENTRY_DONE
#define ERROR_IRQ IRQ_INTERNAL_ERROR
#define RX_NOK_IRQ IRQ_RX_NOK
/* Those IRQs are enabled all the time */
#if RF_CORE_DEBUG_CRC
#define ENABLED_IRQS (RX_FRAME_IRQ | ERROR_IRQ | RX_NOK_IRQ)
#else
#define ENABLED_IRQS (RX_FRAME_IRQ | ERROR_IRQ)
#endif
#define cc26xx_rf_cpe0_isr RFCCPE0IntHandler
#define cc26xx_rf_cpe1_isr RFCCPE1IntHandler
/*---------------------------------------------------------------------------*/
/* Remember the last Radio Op issued to the radio */
static rfc_radioOp_t *last_radio_op = NULL;
/*---------------------------------------------------------------------------*/
/* A struct holding pointers to the primary mode's abort() and restore() */
static const rf_core_primary_mode_t *primary_mode = NULL;
/*---------------------------------------------------------------------------*/
PROCESS(rf_core_process, "CC13xx / CC26xx RF driver");
/*---------------------------------------------------------------------------*/
#define RF_CORE_CLOCKS_MASK (RFC_PWR_PWMCLKEN_RFC_M | RFC_PWR_PWMCLKEN_CPE_M \
| RFC_PWR_PWMCLKEN_CPERAM_M)
/*---------------------------------------------------------------------------*/
uint8_t
rf_core_is_accessible()
{
if(ti_lib_prcm_rf_ready() &&
ti_lib_prcm_power_domain_status(PRCM_DOMAIN_RFCORE) ==
PRCM_DOMAIN_POWER_ON) {
return RF_CORE_ACCESSIBLE;
}
return RF_CORE_NOT_ACCESSIBLE;
}
/*---------------------------------------------------------------------------*/
uint_fast8_t
rf_core_send_cmd(uint32_t cmd, uint32_t *status)
{
uint32_t timeout_count = 0;
bool interrupts_disabled;
bool is_radio_op = false;
/* If cmd is 4-byte aligned, then it's a radio OP. Clear the status field */
if((cmd & 0x03) == 0) {
is_radio_op = true;
((rfc_radioOp_t *)cmd)->status = RF_CORE_RADIO_OP_STATUS_IDLE;
}
/*
* Make sure ContikiMAC doesn't turn us off from within an interrupt while
* we are accessing RF Core registers
*/
interrupts_disabled = ti_lib_int_master_disable();
if(!rf_core_is_accessible()) {
PRINTF("rf_core_send_cmd: RF was off\n");
if(!interrupts_disabled) {
ti_lib_int_master_enable();
}
return RF_CORE_CMD_ERROR;
}
if(is_radio_op) {
uint16_t command_no = ((rfc_radioOp_t *)cmd)->commandNo;
if((command_no & RF_CORE_COMMAND_PROTOCOL_MASK) != RF_CORE_COMMAND_PROTOCOL_COMMON &&
(command_no & RF_CORE_COMMAND_TYPE_MASK) == RF_CORE_COMMAND_TYPE_RADIO_OP) {
last_radio_op = (rfc_radioOp_t *)cmd;
}
}
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_CMDR) = cmd;
do {
*status = HWREG(RFC_DBELL_BASE + RFC_DBELL_O_CMDSTA);
if(++timeout_count > 50000) {
PRINTF("rf_core_send_cmd: 0x%08lx Timeout\n", cmd);
if(!interrupts_disabled) {
ti_lib_int_master_enable();
}
return RF_CORE_CMD_ERROR;
}
} while(*status == RF_CORE_CMDSTA_PENDING);
if(!interrupts_disabled) {
ti_lib_int_master_enable();
}
/*
* If we reach here the command is no longer pending. It is either completed
* successfully or with error
*/
return (*status & RF_CORE_CMDSTA_RESULT_MASK) == RF_CORE_CMDSTA_DONE;
}
/*---------------------------------------------------------------------------*/
uint_fast8_t
rf_core_wait_cmd_done(void *cmd)
{
volatile rfc_radioOp_t *command = (rfc_radioOp_t *)cmd;
uint32_t timeout_cnt = 0;
/*
* 0xn4nn=DONE, 0x0400=DONE_OK while all other "DONE" values means done
* but with some kind of error (ref. "Common radio operation status codes")
*/
do {
if(++timeout_cnt > 500000) {
return RF_CORE_CMD_ERROR;
}
} while((command->status & RF_CORE_RADIO_OP_MASKED_STATUS)
!= RF_CORE_RADIO_OP_MASKED_STATUS_DONE);
return (command->status & RF_CORE_RADIO_OP_MASKED_STATUS)
== RF_CORE_RADIO_OP_STATUS_DONE_OK;
}
/*---------------------------------------------------------------------------*/
int
rf_core_power_up()
{
uint32_t cmd_status;
bool interrupts_disabled = ti_lib_int_master_disable();
ti_lib_int_pend_clear(INT_RF_CPE0);
ti_lib_int_pend_clear(INT_RF_CPE1);
ti_lib_int_disable(INT_RF_CPE0);
ti_lib_int_disable(INT_RF_CPE1);
/* Enable RF Core power domain */
ti_lib_prcm_power_domain_on(PRCM_DOMAIN_RFCORE);
while(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_RFCORE)
!= PRCM_DOMAIN_POWER_ON);
ti_lib_prcm_domain_enable(PRCM_DOMAIN_RFCORE);
ti_lib_prcm_load_set();
while(!ti_lib_prcm_load_get());
while(!rf_core_is_accessible()) {
PRINTF("rf_core_power_up: Not ready\n");
}
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = 0x0;
ti_lib_int_enable(INT_RF_CPE0);
ti_lib_int_enable(INT_RF_CPE1);
if(!interrupts_disabled) {
ti_lib_int_master_enable();
}
/* Let CPE boot */
HWREG(RFC_PWR_NONBUF_BASE + RFC_PWR_O_PWMCLKEN) = RF_CORE_CLOCKS_MASK;
/* Send ping (to verify RFCore is ready and alive) */
if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_PING), &cmd_status) != RF_CORE_CMD_OK) {
PRINTF("rf_core_power_up: CMD_PING fail, CMDSTA=0x%08lx\n", cmd_status);
return RF_CORE_CMD_ERROR;
}
return RF_CORE_CMD_OK;
}
/*---------------------------------------------------------------------------*/
void
rf_core_power_down()
{
bool interrupts_disabled = ti_lib_int_master_disable();
ti_lib_int_disable(INT_RF_CPE0);
ti_lib_int_disable(INT_RF_CPE1);
if(rf_core_is_accessible()) {
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = 0x0;
}
/* Shut down the RFCORE clock domain in the MCU VD */
ti_lib_prcm_domain_disable(PRCM_DOMAIN_RFCORE);
ti_lib_prcm_load_set();
while(!ti_lib_prcm_load_get());
/* Turn off RFCORE PD */
ti_lib_prcm_power_domain_off(PRCM_DOMAIN_RFCORE);
while(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_RFCORE)
!= PRCM_DOMAIN_POWER_OFF);
ti_lib_int_pend_clear(INT_RF_CPE0);
ti_lib_int_pend_clear(INT_RF_CPE1);
ti_lib_int_enable(INT_RF_CPE0);
ti_lib_int_enable(INT_RF_CPE1);
if(!interrupts_disabled) {
ti_lib_int_master_enable();
}
}
/*---------------------------------------------------------------------------*/
uint8_t
rf_core_set_modesel()
{
uint8_t rv = RF_CORE_CMD_ERROR;
if(ti_lib_chipinfo_chip_family_is_cc26xx()) {
if(ti_lib_chipinfo_supports_ble() == true &&
ti_lib_chipinfo_supports_ieee_802_15_4() == true) {
/* CC2650 */
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE5;
rv = RF_CORE_CMD_OK;
} else if(ti_lib_chipinfo_supports_ble() == false &&
ti_lib_chipinfo_supports_ieee_802_15_4() == true) {
/* CC2630 */
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE2;
rv = RF_CORE_CMD_OK;
}
} else if(ti_lib_chipinfo_chip_family_is_cc13xx()) {
if(ti_lib_chipinfo_supports_ble() == false &&
ti_lib_chipinfo_supports_ieee_802_15_4() == false) {
/* CC1310 */
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE3;
rv = RF_CORE_CMD_OK;
}
}
return rv;
}
/*---------------------------------------------------------------------------*/
uint8_t
rf_core_start_rat()
{
uint32_t cmd_status;
/* Start radio timer (RAT) */
if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_START_RAT), &cmd_status)
!= RF_CORE_CMD_OK) {
PRINTF("rf_core_apply_patches: START_RAT fail, CMDSTA=0x%08lx\n",
cmd_status);
return RF_CORE_CMD_ERROR;
}
return RF_CORE_CMD_OK;
}
/*---------------------------------------------------------------------------*/
uint8_t
rf_core_boot()
{
if(rf_core_power_up() != RF_CORE_CMD_OK) {
PRINTF("rf_core_boot: rf_core_power_up() failed\n");
rf_core_power_down();
return RF_CORE_CMD_ERROR;
}
if(rf_core_start_rat() != RF_CORE_CMD_OK) {
PRINTF("rf_core_boot: rf_core_start_rat() failed\n");
rf_core_power_down();
return RF_CORE_CMD_ERROR;
}
return RF_CORE_CMD_OK;
}
/*---------------------------------------------------------------------------*/
void
rf_core_setup_interrupts()
{
bool interrupts_disabled;
/* We are already turned on by the caller, so this should not happen */
if(!rf_core_is_accessible()) {
PRINTF("setup_interrupts: No access\n");
return;
}
/* Disable interrupts */
interrupts_disabled = ti_lib_int_master_disable();
/* Set all interrupt channels to CPE0 channel, error to CPE1 */
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEISL) = ERROR_IRQ;
/* Acknowledge configured interrupts */
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = ENABLED_IRQS;
/* Clear interrupt flags, active low clear(?) */
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
ti_lib_int_pend_clear(INT_RF_CPE0);
ti_lib_int_pend_clear(INT_RF_CPE1);
ti_lib_int_enable(INT_RF_CPE0);
ti_lib_int_enable(INT_RF_CPE1);
if(!interrupts_disabled) {
ti_lib_int_master_enable();
}
}
/*---------------------------------------------------------------------------*/
void
rf_core_cmd_done_en()
{
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = ENABLED_IRQS;
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = ENABLED_IRQS +
IRQ_LAST_COMMAND_DONE;
}
/*---------------------------------------------------------------------------*/
void
rf_core_cmd_done_dis()
{
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = ENABLED_IRQS;
}
/*---------------------------------------------------------------------------*/
rfc_radioOp_t *
rf_core_get_last_radio_op()
{
return last_radio_op;
}
/*---------------------------------------------------------------------------*/
void
rf_core_init_radio_op(rfc_radioOp_t *op, uint16_t len, uint16_t command)
{
memset(op, 0, len);
op->commandNo = command;
op->condition.rule = COND_NEVER;
}
/*---------------------------------------------------------------------------*/
void
rf_core_primary_mode_register(const rf_core_primary_mode_t *mode)
{
primary_mode = mode;
}
/*---------------------------------------------------------------------------*/
void
rf_core_primary_mode_abort()
{
if(primary_mode) {
if(primary_mode->abort) {
primary_mode->abort();
}
}
}
/*---------------------------------------------------------------------------*/
uint8_t
rf_core_primary_mode_restore()
{
if(primary_mode) {
if(primary_mode->restore) {
return primary_mode->restore();
}
}
return RF_CORE_CMD_ERROR;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(rf_core_process, ev, data)
{
int len;
PROCESS_BEGIN();
while(1) {
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
do {
watchdog_periodic();
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
} while(len > 0);
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
static void
rx_nok_isr(void)
{
RIMESTATS_ADD(badcrc);
PRINTF("RF: Bad CRC\n");
}
/*---------------------------------------------------------------------------*/
void
cc26xx_rf_cpe1_isr(void)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
PRINTF("RF Error\n");
if(!rf_core_is_accessible()) {
if(rf_core_power_up() != RF_CORE_CMD_OK) {
return;
}
}
/* Clear interrupt flags */
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
void
cc26xx_rf_cpe0_isr(void)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if(!rf_core_is_accessible()) {
printf("RF ISR called but RF not ready... PANIC!!\n");
if(rf_core_power_up() != RF_CORE_CMD_OK) {
PRINTF("rf_core_power_up() failed\n");
return;
}
}
ti_lib_int_master_disable();
if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & RX_FRAME_IRQ) {
process_poll(&rf_core_process);
}
if(RF_CORE_DEBUG_CRC) {
if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & RX_NOK_IRQ) {
rx_nok_isr();
}
}
/* Clear interrupt flags */
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
ti_lib_int_master_enable();
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
/** @} */
Reference in a new issue View git blame Copy permalink