osd-contiki/platform/mbxxx/dev/mems.c
Maria Laura Stefanizzi 22f39ab4ff MEMS I2C integration.
This patch allows the MEMS driver to use the i2c driver.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
2013-11-27 15:40:07 +01:00

206 lines
6.5 KiB
C

/**
* \addtogroup mbxxx-platform
*
* @{
*/
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : hal_led.c
* Author : MCD Application Team
* Version : V1.0
* Date : September 2009
* Description : Driver for leds management on STM32W108 MBXXX boards
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Includes ------------------------------------------------------------------*/
#include PLATFORM_HEADER
#include "mems.h"
#include "timer.h"
#include "i2c.h"
/* Private define -- ---------------------------------------------------------*/
#define SUCCESS 1
#define FAIL 0
/* Private variables ---------------------------------------------------------*/
static boolean fullscale_state;
/* Functions -----------------------------------------------------------------*/
/*******************************************************************************
* Function Name : MEMS_Write_Reg
* Description : It writes a register on the I2C target
* Input : slave addr is the I2C target device
* reg_addr is the address of the register to be written
* reg_value is the value of the register to be written
* Output : None
* Return : 1 if the register has been successfully written, 0 otherwise.
*******************************************************************************/
uint8_t
MEMS_Write_Reg (uint8_t slave_addr, uint8_t reg_addr, uint8_t reg_value)
{
i2c_start();
/* send the address low byte */
i2c_write(slave_addr);
/* send register address */
i2c_write(reg_addr);
/* send register value */
i2c_write(reg_value);
i2c_stop();
return SUCCESS;
}/* end MEMS_Write_Reg() */
/*******************************************************************************
* Function Name : MEMS_Read_Reg
* Description : It reads a register on the I2C target
* Input : slave addr is the I2C target device
* reg_addr is the address of the register to be read
* pBuffer is the storage destination for the read data
* NoOfBytes is the amount of data to read
* Output : I2C frame
* Return : 1 if the register has been successfully read, 0 otherwise.
*******************************************************************************/
uint8_t
MEMS_Read_Reg (uint8_t slave_addr, uint8_t reg_addr, uint8_t *pBuffer,
uint8_t NoOfBytes)
{
uint8_t i, ack, addr = reg_addr;
if (NoOfBytes > 1)
addr += REPETIR;
i2c_start();
/* send the address low byte */
i2c_write(slave_addr | 0x00);
i2c_write(addr);
i2c_start();
/* send the address low byte */
i2c_write(slave_addr | 0x01);
/* loop receiving the data */
for (i = 0; i < NoOfBytes; i++){
if (i < (NoOfBytes - 1))
/* ack on receipt of data */
ack = 1;
else
/* don't ack if last one */
ack = 0;
/* receive data */
*(pBuffer+i) = i2c_read(ack);
}
i2c_stop();
return SUCCESS;
}/* end MEMS_Read_Reg() */
/*******************************************************************************
* Function Name : MEMS_Init
* Description : It inits mems
* Input : None
* Output : status
* Return : None
*******************************************************************************/
uint8_t
MEMS_Init(void)
{
TIM2_CCER &= 0xFFFFEEEE;
MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, STATUS_REG, 0x00); //no flag
MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, FF_WU_CFG, 0x00); // all off
MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, DD_CFG, 0x00); // all off
MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, 0x00);
MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0x87);
fullscale_state = MEMS_LOW_RANGE;
return 1;
}/* end MEMS_Init */
/*******************************************************************************
* Function Name : I2C_MEMS_On
* Description : It turn on the device.
* Input : None
* Output : None
* Return : 1 if the device has been successfully set to normal mode, 0 otherwise.
*******************************************************************************/
uint8_t
MEMS_On (void)
{
return MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0xC7);
}
/*******************************************************************************
* Function Name : MEMS_Off
* Description : It turn off the device.
* Input : None
* Output : None
* Return : 1 if the device has been successfully set to power-down mode, 0 otherwise.
*******************************************************************************/
uint8_t
MEMS_Off (void)
{
return MEMS_Write_Reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0x87);
}
/*******************************************************************************
* Function Name : I2C_MEMS_SetFullScale
* Description : It sets the full-scale range of the device.
* Input : range HIGH for high scale selection, LOW for low range.
* Output : None
* Return : 1 if the device has been successfully set to full scale mode, 0 otherwise.
*******************************************************************************/
uint8_t
MEMS_SetFullScale (boolean range)
{
uint8_t i2c_buffer;
MEMS_Read_Reg(kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, &i2c_buffer, 1);
if(range==MEMS_HIGH_RANGE){
i2c_buffer |= 0x20;
}
else {
i2c_buffer &= ~0x20;
}
MEMS_Write_Reg(kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, i2c_buffer);
fullscale_state = range;
return 1;
}
/*******************************************************************************
* Function Name : MEMS_GetFullScale
* Description : It get the full-scale range of the device.
* Input : None
* Output : None
* Return : range HIGH for high scale selection, LOW for low range.
*******************************************************************************/
boolean
MEMS_GetFullScale (void)
{
return fullscale_state;
}
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
/** @} */