osd-contiki/cpu/cc2538/cc2538.lds
Benoît Thébaudeau ee3ee049e4 cc2538: Set the entry point to the CCA
No entry point was defined, so it defaulted to the beginning of the
.text output section where the vector table is located by default in
Contiki. Actually, the vector table may be located elsewhere, and the
ROM-based boot loader first reads the CCA to find the vector table.

Consequently, this commit sets the entry point to the CCA, which fixes
both the entry point and the initial symbol reference, so this commit
also removes the now-unneeded "__used__" and "KEEP" keywords from the
CCA.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:34 +01:00

117 lines
3.6 KiB
Plaintext

/*
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* cc2538 linker configuration file. This is not the actual file used at link
* stage. Rather, it is used as input for the auto-generation of the actual
* ld script, which is called cc2538.ld and will be in the project directory
*/
MEMORY
{
FLASH_FW (rx) : ORIGIN = CC2538_DEV_FLASH_ADDR,
LENGTH = CC2538_DEV_FLASH_SIZE - FLASH_CCA_SIZE
FLASH_CCA (RX) : ORIGIN = FLASH_CCA_ADDR, LENGTH = FLASH_CCA_SIZE
/*
* If PM2 is enabled, then the PM2 SRAM limitations apply, i.e. the
* regular-leakage SRAM is a non-retention SRAM and the low-leakage SRAM is
* a full-retention SRAM.
* Else, the data in the regular-leakage SRAM is always retained, so there
* are virtually a non-retention SRAM with a size of 0 bytes and a
* full-retention SRAM spanning the whole SRAM, which is more convenient to
* use.
*/
#if LPM_CONF_ENABLE && LPM_CONF_MAX_PM >= 2
NRSRAM (RWX) : ORIGIN = CC2538_DEV_RLSRAM_ADDR,
LENGTH = CC2538_DEV_RLSRAM_SIZE
FRSRAM (RWX) : ORIGIN = CC2538_DEV_LLSRAM_ADDR,
LENGTH = CC2538_DEV_LLSRAM_SIZE
#else
NRSRAM (RWX) : ORIGIN = CC2538_DEV_RLSRAM_ADDR, LENGTH = 0
FRSRAM (RWX) : ORIGIN = CC2538_DEV_SRAM_ADDR, LENGTH = CC2538_DEV_SRAM_SIZE
#endif
}
ENTRY(flash_cca_lock_page)
SECTIONS
{
.text :
{
_text = .;
*(.vectors)
*(.text*)
*(.rodata*)
_etext = .;
} > FLASH_FW= 0
.socdata (NOLOAD) :
{
*(.udma_channel_control_table)
} > FRSRAM
.data : ALIGN(4)
{
_data = .;
*(.data*)
_edata = .;
} > FRSRAM AT > FLASH_FW
_ldata = LOADADDR(.data);
.ARM.exidx :
{
*(.ARM.exidx*)
} > FLASH_FW
.bss :
{
_bss = .;
*(.bss*)
*(COMMON)
_ebss = .;
} > FRSRAM
.stack (NOLOAD) :
{
*(.stack)
} > FRSRAM
.nrdata (NOLOAD) :
{
_nrdata = .;
*(.nrdata*)
_enrdata = .;
} > NRSRAM
.flashcca :
{
*(.flashcca)
} > FLASH_CCA
}