04bbba6c12
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework *all* osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed.
125 lines
4.4 KiB
C
125 lines
4.4 KiB
C
/*
|
|
DHT-11 Library
|
|
(c) Created by Charalampos Andrianakis on 18/12/11.
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
of this software and associated documentation files (the "Software"), to deal
|
|
in the Software without restriction, including without limitation the rights
|
|
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
copies of the Software, and to permit persons to whom the Software is
|
|
furnished to do so, subject to the following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included in
|
|
all copies or substantial portions of the Software.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
THE SOFTWARE.
|
|
*/
|
|
|
|
#include <avr/io.h>
|
|
#include "contiki.h"
|
|
#include "dht11.h"
|
|
#include "led.h" // debug
|
|
|
|
#define udelay(u) clock_delay_usec(u)
|
|
#define mdelay(u) clock_delay_msec(u)
|
|
|
|
// todo: set DHT22 or DHT11 in project file
|
|
// define for DHT11 else for DHT22, RHT03
|
|
// #define DHT11 1
|
|
|
|
uint8_t DHT_Read_Data(uint16_t *temperature, uint16_t *humidity){
|
|
|
|
//data[5] is 8byte table where data come from DHT are stored
|
|
//laststate holds laststate value
|
|
//counter is used to count microSeconds
|
|
uint8_t data[5], laststate = 0, counter = 0, j = 0, i = 0;
|
|
|
|
//Clear array
|
|
data[0] = data[1] = data[2] = data[3] = data[4] = 0;
|
|
|
|
uint8_t volatile sreg;
|
|
sreg = SREG; /* Save status register before disabling interrupts. */
|
|
cli(); /* Disable interrupts. */
|
|
|
|
//Set pin Output
|
|
//Pin High
|
|
DHT_DRIVE();
|
|
mdelay(100); //Wait for 100mS
|
|
|
|
//Send Request Signal
|
|
//Pin Low
|
|
OUTP_0(); //20ms Low
|
|
mdelay(20);
|
|
//Pin High
|
|
OUTP_1();
|
|
udelay(40); //40us High
|
|
|
|
//Set pin Input to read Bus
|
|
//Set pin Input
|
|
DHT_RELEASE();
|
|
laststate=DHT_INP(); //Read Pin value
|
|
|
|
//Repeat for each Transistions
|
|
for (i=0; i<MAXTIMINGS; i++) {
|
|
//While state is the same count microseconds
|
|
//led1_on();
|
|
//led1_off();
|
|
|
|
while (laststate==DHT_INP()) {
|
|
udelay(1);
|
|
counter++;
|
|
if (counter>254) break;
|
|
}
|
|
|
|
if (counter>254) break;
|
|
|
|
//laststate==_BV(DHT_PIN) checks if laststate was High
|
|
//ignore the first 2 transitions which are the DHT Response
|
|
//if (laststate==_BV(DHT_PIN) && (i > 2)) {
|
|
if ((i&0x01) && (i > 2)) {
|
|
//Save bits in segments of bytes
|
|
//Shift data[] value 1 position left
|
|
//Example. 01010100 if we shift it left one time it will be
|
|
//10101000
|
|
|
|
data[j/8]<<=1;
|
|
if (counter >= 15) { //If it was high for more than 40uS
|
|
//led1_on();
|
|
data[j/8]|=1; //it means it is bit '1' so make a logic
|
|
//led1_off();
|
|
} //OR with the value (save it)
|
|
j++; //making an OR by 1 to this value 10101000
|
|
} //we will have the resault 10101001
|
|
//1 in 8-bit binary is 00000001
|
|
//j/8 changes table record every 8 bits which means a byte has been saved
|
|
//so change to next record. 0/8=0 1/8=0 ... 7/8=0 8/8=1 ... 15/8=1 16/8=2
|
|
laststate=DHT_INP(); //save current state
|
|
counter=0; //reset counter
|
|
|
|
}
|
|
SREG = sreg; /* Enable interrupts. */
|
|
//printf("HUM %d %d %d %d %d %d",data[0],data[1],data[2],data[3],data[4],(uint8_t)(data[0] + data[1] + data[2] + data[3]) );
|
|
//Check if data received are correct by checking the CheckSum
|
|
if ((uint8_t)(data[0] + data[1] + data[2] + data[3]) == data[4]) {
|
|
#ifdef DHT11
|
|
*humidity = data[0]*100;
|
|
*temperature = data[2]*100;
|
|
#else
|
|
*humidity = ((uint16_t)data[0]<<8 | data[1])*10;
|
|
*temperature = ((uint16_t)data[2]<<8 | data[3])*10;
|
|
#endif
|
|
return 0;
|
|
}else{
|
|
*humidity = 2;
|
|
*temperature = 2;
|
|
// uart_puts("\r\nCheck Sum Error");
|
|
}
|
|
|
|
return 0xff; // Check Sum Error
|
|
}
|