431 lines
11 KiB
C
431 lines
11 KiB
C
/* This file has been prepared for Doxygen automatic documentation generation.*/
|
|
/*! \file usb_drv.c************************************************************
|
|
*
|
|
* \brief
|
|
* This file contains the USB driver routines.
|
|
*
|
|
* \addtogroup usbstick
|
|
*
|
|
* \author
|
|
* Atmel Corporation: http://www.atmel.com \n
|
|
* Support email: avr@atmel.com
|
|
*
|
|
******************************************************************************/
|
|
/* Copyright (c) 2008 ATMEL Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
* Neither the name of the copyright holders nor the names of
|
|
contributors may be used to endorse or promote products derived
|
|
from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/**
|
|
\addtogroup usbdriver
|
|
@{
|
|
*/
|
|
|
|
//_____ I N C L U D E S ____________________________________________________
|
|
|
|
#include "config.h"
|
|
#include "conf_usb.h"
|
|
#include "usb_drv.h"
|
|
#include <util/delay.h>
|
|
|
|
//_____ M A C R O S ________________________________________________________
|
|
|
|
//_____ D E C L A R A T I O N ______________________________________________
|
|
|
|
#if (USB_DEVICE_FEATURE==DISABLED && USB_HOST_FEATURE==DISABLED)
|
|
#error at least one of USB_DEVICE_FEATURE or USB_HOST_FEATURE should be unabled
|
|
#endif
|
|
|
|
#if (USB_DEVICE_FEATURE == ENABLED)
|
|
|
|
#define USB_ENDPOINT_WAIT_TIMEOUT 250
|
|
|
|
U8 usb_endpoint_wait_for_write_enabled() {
|
|
#if USB_ENDPOINT_WAIT_TIMEOUT
|
|
U16 timeout=USB_ENDPOINT_WAIT_TIMEOUT;
|
|
while(timeout) {
|
|
if(Is_usb_sof()) {
|
|
Usb_ack_sof();
|
|
timeout--;
|
|
}
|
|
#else
|
|
while(1) {
|
|
#endif
|
|
if(Is_usb_write_enabled())
|
|
return 0;
|
|
if((!Is_usb_enabled()) || Is_usb_detached())
|
|
return 1;
|
|
if(!Is_usb_endpoint_enabled())
|
|
return 2;
|
|
if(Is_usb_endpoint_stall_requested())
|
|
return 3;
|
|
}
|
|
return 10;
|
|
}
|
|
|
|
U8 usb_endpoint_wait_for_read_control_enabled() {
|
|
#if USB_ENDPOINT_WAIT_TIMEOUT
|
|
U16 timeout=USB_ENDPOINT_WAIT_TIMEOUT;
|
|
while(timeout) {
|
|
if(Is_usb_sof()) {
|
|
Usb_ack_sof();
|
|
timeout--;
|
|
}
|
|
#else
|
|
while(1) {
|
|
#endif
|
|
if(Is_usb_read_control_enabled())
|
|
return 0;
|
|
if((!Is_usb_enabled()) || Is_usb_detached())
|
|
return 1;
|
|
if(!Is_usb_endpoint_enabled())
|
|
return 2;
|
|
if(Is_usb_endpoint_stall_requested())
|
|
return 3;
|
|
}
|
|
return 10;
|
|
}
|
|
|
|
|
|
U8 usb_endpoint_wait_for_IN_ready() {
|
|
#if USB_ENDPOINT_WAIT_TIMEOUT
|
|
U16 timeout=USB_ENDPOINT_WAIT_TIMEOUT;
|
|
while(timeout) {
|
|
if(Is_usb_sof()) {
|
|
Usb_ack_sof();
|
|
timeout--;
|
|
}
|
|
#else
|
|
while(1) {
|
|
#endif
|
|
if(Is_usb_in_ready())
|
|
return 0;
|
|
if((!Is_usb_enabled()) || Is_usb_detached())
|
|
return 1;
|
|
if(!Is_usb_endpoint_enabled())
|
|
return 2;
|
|
if(Is_usb_endpoint_stall_requested())
|
|
return 3;
|
|
}
|
|
return 10;
|
|
}
|
|
|
|
|
|
U8 usb_endpoint_wait_for_receive_out() {
|
|
#if USB_ENDPOINT_WAIT_TIMEOUT
|
|
U16 timeout=USB_ENDPOINT_WAIT_TIMEOUT;
|
|
while(timeout) {
|
|
if(Is_usb_sof()) {
|
|
Usb_ack_sof();
|
|
timeout--;
|
|
}
|
|
#else
|
|
while(1) {
|
|
#endif
|
|
if(Is_usb_receive_out())
|
|
return 0;
|
|
if((!Is_usb_enabled()) || Is_usb_detached())
|
|
return 1;
|
|
if(!Is_usb_endpoint_enabled())
|
|
return 2;
|
|
if(Is_usb_endpoint_stall_requested())
|
|
return 3;
|
|
}
|
|
return 10;
|
|
}
|
|
|
|
//! usb_configure_endpoint.
|
|
//!
|
|
//! This function configures an endpoint with the selected type.
|
|
//!
|
|
//! @param config0
|
|
//! @param config1
|
|
//!
|
|
//! @return Is_endpoint_configured().
|
|
//!
|
|
U8 usb_config_ep(U8 config0, U8 config1)
|
|
{
|
|
Usb_enable_endpoint();
|
|
UECFG0X = config0;
|
|
UECFG1X = (UECFG1X & (1<<ALLOC)) | config1;
|
|
Usb_allocate_memory();
|
|
return (Is_endpoint_configured());
|
|
}
|
|
|
|
//! usb_select_endpoint_interrupt.
|
|
//!
|
|
//! This function select the endpoint where an event occurs and returns the
|
|
//! number of this endpoint. If no event occurs on the endpoints, this
|
|
//! function returns 0.
|
|
//!
|
|
//! @return 0 endpoint number.
|
|
//!
|
|
U8 usb_select_enpoint_interrupt(void)
|
|
{
|
|
U8 interrupt_flags;
|
|
U8 ep_num;
|
|
|
|
ep_num = 0;
|
|
interrupt_flags = Usb_interrupt_flags();
|
|
|
|
while(ep_num < MAX_EP_NB)
|
|
{
|
|
if (interrupt_flags & 1)
|
|
{
|
|
return (ep_num);
|
|
}
|
|
else
|
|
{
|
|
ep_num++;
|
|
interrupt_flags = interrupt_flags >> 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
//! usb_send_packet.
|
|
//!
|
|
//! This function moves the data pointed by tbuf to the selected endpoint fifo
|
|
//! and sends it through the USB.
|
|
//!
|
|
//!
|
|
//! @param ep_num number of the addressed endpoint
|
|
//! @param tbuf address of the first data to send
|
|
//! @param data_length number of bytes to send
|
|
//!
|
|
//! @return remaining_length address of the next U8 to send.
|
|
//!
|
|
//! Example:
|
|
//! usb_send_packet(3,&first_data,0x20); // send packet on the endpoint #3
|
|
//! while(!(Usb_tx_complete)); // wait packet ACK'ed by the Host
|
|
//! Usb_clear_tx_complete(); // acknowledge the transmit
|
|
//!
|
|
//! Note:
|
|
//! tbuf is incremented of 'data_length'.
|
|
//!
|
|
U8 usb_send_packet(U8 ep_num, U8* tbuf, U8 data_length)
|
|
{
|
|
U8 remaining_length;
|
|
|
|
remaining_length = data_length;
|
|
Usb_select_endpoint(ep_num);
|
|
while(Is_usb_write_enabled() && (0 != remaining_length))
|
|
{
|
|
Usb_write_byte(*tbuf);
|
|
remaining_length--;
|
|
tbuf++;
|
|
}
|
|
return remaining_length;
|
|
}
|
|
|
|
//! usb_read_packet.
|
|
//!
|
|
//! This function moves the data stored in the selected endpoint fifo to
|
|
//! the address specified by *rbuf.
|
|
//!
|
|
//!
|
|
//! @param ep_num number of the addressed endpoint
|
|
//! @param rbuf aaddress of the first data to write with the USB data
|
|
//! @param data_length number of bytes to read
|
|
//!
|
|
//! @return remaining_length address of the next U8 to send.
|
|
//!
|
|
//! Example:
|
|
//! while(!(Usb_rx_complete)); // wait new packet received
|
|
//! usb_read_packet(4,&first_data,usb_get_nb_byte); // read packet from ep 4
|
|
//! Usb_clear_rx(); // acknowledge the transmit
|
|
//!
|
|
//! Note:
|
|
//! rbuf is incremented of 'data_length'.
|
|
//!
|
|
U8 usb_read_packet(U8 ep_num, U8* rbuf, U8 data_length)
|
|
{
|
|
U8 remaining_length;
|
|
|
|
remaining_length = data_length;
|
|
Usb_select_endpoint(ep_num);
|
|
|
|
while(Is_usb_read_enabled() && (0 != remaining_length))
|
|
{
|
|
*rbuf = Usb_read_byte();
|
|
remaining_length--;
|
|
rbuf++;
|
|
}
|
|
return remaining_length;
|
|
}
|
|
|
|
//! usb_halt_endpoint.
|
|
//!
|
|
//! This function sends a STALL handshake for the next Host request. A STALL
|
|
//! handshake will be send for each next request untill a SETUP or a Clear Halt
|
|
//! Feature occurs for this endpoint.
|
|
//!
|
|
//! @param ep_num number of the addressed endpoint
|
|
//!
|
|
void usb_halt_endpoint (U8 ep_num)
|
|
{
|
|
Usb_select_endpoint(ep_num);
|
|
Usb_enable_stall_handshake();
|
|
}
|
|
|
|
//! usb_init_device.
|
|
//!
|
|
//! This function initializes the USB device controller and
|
|
//! configures the Default Control Endpoint.
|
|
//!
|
|
//! @retval FALSE if not Is_usb_id_device() returns FALSE
|
|
//! @return usb_configure_endpoint() status
|
|
//!
|
|
U8 usb_init_device (void)
|
|
{
|
|
U8 rv = FALSE;
|
|
|
|
Usb_select_device();
|
|
if(Is_usb_id_device())
|
|
{
|
|
Usb_select_endpoint(EP_CONTROL);
|
|
if(!Is_usb_endpoint_enabled())
|
|
{
|
|
#if (USB_LOW_SPEED_DEVICE==DISABLE)
|
|
rv = usb_configure_endpoint(EP_CONTROL, \
|
|
TYPE_CONTROL, \
|
|
DIRECTION_OUT, \
|
|
SIZE_64, \
|
|
ONE_BANK, \
|
|
NYET_DISABLED);
|
|
#else
|
|
rv = usb_configure_endpoint(EP_CONTROL, \
|
|
TYPE_CONTROL, \
|
|
DIRECTION_OUT, \
|
|
SIZE_8, \
|
|
ONE_BANK, \
|
|
NYET_DISABLED);
|
|
#endif
|
|
|
|
}
|
|
}
|
|
return rv;
|
|
}
|
|
|
|
#endif
|
|
|
|
//! ---------------------------------------------------------
|
|
//! ------------------ HOST ---------------------------------
|
|
//! ---------------------------------------------------------
|
|
|
|
#if (USB_HOST_FEATURE == ENABLED)
|
|
|
|
//! usb_configure_pipe.
|
|
//!
|
|
//! This function configures a pipe with the selected type.
|
|
//!
|
|
//! @param config0
|
|
//! @param config1
|
|
//!
|
|
//! @return Is_endpoint_configured().
|
|
U8 host_config_pipe(U8 config0, U8 config1)
|
|
{
|
|
Host_enable_pipe();
|
|
UPCFG0X = config0;
|
|
UPCFG1X = config1;
|
|
Host_allocate_memory();
|
|
return (Is_pipe_configured());
|
|
}
|
|
|
|
//! host_determine_pipe_size.
|
|
//!
|
|
//! This function returns the size configuration register value according
|
|
//! to the endpint size detected inthe device enumeration process.
|
|
//!
|
|
//! @retval SIZE_8 pipe size register value.
|
|
//! @retval SIZE_16 pipe size register value.
|
|
//! @retval SIZE_32 pipe size register value.
|
|
//! @retval SIZE_64 pipe size register value.
|
|
//! @retval SIZE_128 pipe size register value.
|
|
//! @retval SIZE_256 pipe size register value.
|
|
//! @retval SIZE_512 pipe size register value.
|
|
//! @retval SIZE_1024 pipe size register value.
|
|
//!
|
|
U8 host_determine_pipe_size(U16 size)
|
|
{
|
|
if(size <= 8 ) {return (SIZE_8 );}
|
|
else if(size <= 16 ) {return (SIZE_16 );}
|
|
else if(size <= 32 ) {return (SIZE_32 );}
|
|
else if(size <= 64 ) {return (SIZE_64 );}
|
|
else if(size <= 128) {return (SIZE_128 );}
|
|
else if(size <= 256) {return (SIZE_256 );}
|
|
else if(size <= 512) {return (SIZE_512 );}
|
|
else {return (SIZE_1024);}
|
|
|
|
}
|
|
|
|
//! host_disable_all_pipe.
|
|
//!
|
|
//! This function disable all pipes for the host controller
|
|
//! Usefull to execute upon device disconnection.
|
|
//!
|
|
void host_disable_all_pipe(void)
|
|
{
|
|
U8 i;
|
|
for (i=0;i<7;i++)
|
|
{
|
|
Host_reset_pipe(i);
|
|
Host_select_pipe(i);
|
|
Host_unallocate_memory();
|
|
Host_disable_pipe();
|
|
}
|
|
}
|
|
|
|
//! @brief Returns the pipe number that generates a USB communication interrupt
|
|
//!
|
|
//! This function sould be called only when an interrupt has been detected. Otherwize
|
|
//! the return value is incorect
|
|
//!
|
|
//! @retval MAX_EP_NB + 1 - pipe_number
|
|
//!
|
|
U8 usb_get_nb_pipe_interrupt(void)
|
|
{
|
|
U8 interrupt_flags;
|
|
U8 i;
|
|
|
|
interrupt_flags = Host_get_pipe_interrupt();
|
|
for(i=0;i< MAX_EP_NB;i++)
|
|
{
|
|
if (interrupt_flags & (1<<i))
|
|
{
|
|
return (i);
|
|
}
|
|
}
|
|
// This return should never occurs ....
|
|
return MAX_EP_NB+1;
|
|
}
|
|
|
|
|
|
#endif // USB_HOST_FEATURE == ENABLED
|
|
|
|
/** @} */
|