osd-contiki/platform/remote/dev/phidget-sensor.h
Antonio Lignan 330e450ba4 Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094).
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
2015-05-29 22:04:43 +02:00

85 lines
3.5 KiB
C

/*
* Copyright (c) 2015, Zolertia - http://www.zolertia.com
* Copyright (c) 2015, University of Bristol - http://www.bristol.ac.uk
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup remote-sensors
* @{
*
* \defgroup remote-phidget-sensor Re-Mote Generic Phidget Sensor
*
* Driver for the Re-Mote phidget ADC sensor
*
* This driver supports phidgets connected to both the ADC2 and AND3 channels.
* This is controlled by the type argument of the value() function. Possible
* choices are:
* - PHIDGET_SENSORS_ADC2 (channel 2)
* - PHIDGET_SENSORS_ADC3 (channel 3)
*
* The decimation rate can be set by passing
* REMOTE_SENSORS_CONFIGURE_TYPE_DECIMATION_RATE as the type argument to the
* configure() function and then specifying the rate through the value
* argument. Valid values are:
* - SOC_ADC_ADCCON_DIV_64 (64 bit rate)
* - SOC_ADC_ADCCON_DIV_128 (128 bit rate)
* - SOC_ADC_ADCCON_DIV_256 (256 bit rate)
* - SOC_ADC_ADCCON_DIV_512 (512 bit rate)
* @{
*
* \file
* Header file for the Re-Mote Generic Driver for Phidget/ADC sensors
*/
/*---------------------------------------------------------------------------*/
#ifndef PHIDGET_SENSOR_H_
#define PHIDGET_SENSOR_H_
/*---------------------------------------------------------------------------*/
#include "lib/sensors.h"
#include "dev/soc-adc.h"
/*---------------------------------------------------------------------------*/
/**
* \name Generic phidget sensor
* @{
*/
#define PHIDGET_SENSOR "Phidget ADC"
#define PHIDGET_SENSORS_ADC2 2 /**< 3V3 ADC phidget-like connector ADC2 */
#define PHIDGET_SENSORS_ADC3 3 /**< 3V3 ADC phidget-like connector ADC3 */
/** @} */
/*---------------------------------------------------------------------------*/
extern const struct sensors_sensor phidget_sensor;
/*---------------------------------------------------------------------------*/
#endif /* PHIDGET_SENSOR_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/