414 lines
14 KiB
C
414 lines
14 KiB
C
/*
|
|
* Original file:
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Port to Contiki:
|
|
* Copyright (c) 2013, ADVANSEE - http://www.advansee.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \addtogroup cc2538-ccm
|
|
* @{
|
|
*
|
|
* \file
|
|
* Implementation of the cc2538 AES-CCM driver
|
|
*/
|
|
#include "contiki.h"
|
|
#include "sys/cc.h"
|
|
#include "dev/rom-util.h"
|
|
#include "dev/nvic.h"
|
|
#include "dev/ccm.h"
|
|
#include "reg.h"
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ccm_auth_encrypt_start(uint8_t len_len, uint8_t key_area, const void *nonce,
|
|
const void *adata, uint16_t adata_len, void *pdata,
|
|
uint16_t pdata_len, uint8_t mic_len,
|
|
struct process *process)
|
|
{
|
|
uint32_t iv[4];
|
|
|
|
if(REG(AES_CTRL_ALG_SEL) != 0x00000000) {
|
|
return CRYPTO_RESOURCE_IN_USE;
|
|
}
|
|
|
|
/* Workaround for AES registers not retained after PM2 */
|
|
REG(AES_CTRL_INT_CFG) = AES_CTRL_INT_CFG_LEVEL;
|
|
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_DMA_IN_DONE |
|
|
AES_CTRL_INT_EN_RESULT_AV;
|
|
|
|
REG(AES_CTRL_ALG_SEL) = AES_CTRL_ALG_SEL_AES;
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
|
|
AES_CTRL_INT_CLR_RESULT_AV;
|
|
|
|
REG(AES_KEY_STORE_READ_AREA) = key_area;
|
|
|
|
/* Wait until key is loaded to the AES module */
|
|
while(REG(AES_KEY_STORE_READ_AREA) & AES_KEY_STORE_READ_AREA_BUSY);
|
|
|
|
/* Check for Key Store read error */
|
|
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
|
|
/* Clear the Keystore Read error bit */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
|
|
/* Disable the master control / DMA clock */
|
|
REG(AES_CTRL_ALG_SEL) = 0x00000000;
|
|
return AES_KEYSTORE_READ_ERROR;
|
|
}
|
|
|
|
/* Prepare the encryption initialization vector
|
|
* Flags: L' = L - 1 */
|
|
((uint8_t *)iv)[0] = len_len - 1;
|
|
/* Nonce */
|
|
rom_util_memcpy(&((uint8_t *)iv)[1], nonce, 15 - len_len);
|
|
/* Initialize counter to 0 */
|
|
rom_util_memset(&((uint8_t *)iv)[16 - len_len], 0, len_len);
|
|
|
|
/* Write initialization vector */
|
|
REG(AES_AES_IV_0) = iv[0];
|
|
REG(AES_AES_IV_1) = iv[1];
|
|
REG(AES_AES_IV_2) = iv[2];
|
|
REG(AES_AES_IV_3) = iv[3];
|
|
|
|
/* Program AES-CCM encryption */
|
|
REG(AES_AES_CTRL) = AES_AES_CTRL_SAVE_CONTEXT | /* Save context */
|
|
(((MAX(mic_len, 2) - 2) >> 1) << AES_AES_CTRL_CCM_M_S) | /* M */
|
|
((len_len - 1) << AES_AES_CTRL_CCM_L_S) | /* L */
|
|
AES_AES_CTRL_CCM | /* CCM */
|
|
AES_AES_CTRL_CTR_WIDTH_128 | /* CTR width 128 */
|
|
AES_AES_CTRL_CTR | /* CTR */
|
|
AES_AES_CTRL_DIRECTION_ENCRYPT; /* Encryption */
|
|
|
|
/* Write the length of the crypto block (lo) */
|
|
REG(AES_AES_C_LENGTH_0) = pdata_len;
|
|
/* Write the length of the crypto block (hi) */
|
|
REG(AES_AES_C_LENGTH_1) = 0;
|
|
|
|
/* Write the length of the AAD data block (may be non-block size-aligned) */
|
|
REG(AES_AES_AUTH_LENGTH) = adata_len;
|
|
|
|
if(adata_len != 0) {
|
|
/* Configure DMAC to fetch the AAD data
|
|
* Enable DMA channel 0 */
|
|
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
|
|
/* Base address of the AAD input data in ext. memory */
|
|
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)adata;
|
|
/* AAD data length in bytes */
|
|
REG(AES_DMAC_CH0_DMALENGTH) = adata_len;
|
|
|
|
/* Wait for completion of the AAD data transfer, DMA_IN_DONE */
|
|
while(!(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_IN_DONE));
|
|
|
|
/* Check for the absence of error */
|
|
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
|
|
/* Clear the DMA error */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR;
|
|
/* Disable the master control / DMA clock */
|
|
REG(AES_CTRL_ALG_SEL) = 0x00000000;
|
|
return CRYPTO_DMA_BUS_ERROR;
|
|
}
|
|
}
|
|
|
|
/* Clear interrupt status */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
|
|
AES_CTRL_INT_CLR_RESULT_AV;
|
|
|
|
if(process != NULL) {
|
|
crypto_register_process_notification(process);
|
|
nvic_interrupt_unpend(NVIC_INT_AES);
|
|
nvic_interrupt_enable(NVIC_INT_AES);
|
|
}
|
|
|
|
/* Enable result available bit in interrupt enable */
|
|
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_RESULT_AV;
|
|
|
|
if(pdata_len != 0) {
|
|
/* Configure DMAC
|
|
* Enable DMA channel 0 */
|
|
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
|
|
/* Base address of the payload data in ext. memory */
|
|
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)pdata;
|
|
/* Payload data length in bytes */
|
|
REG(AES_DMAC_CH0_DMALENGTH) = pdata_len;
|
|
|
|
/* Enable DMA channel 1 */
|
|
REG(AES_DMAC_CH1_CTRL) = AES_DMAC_CH_CTRL_EN;
|
|
/* Base address of the output data buffer */
|
|
REG(AES_DMAC_CH1_EXTADDR) = (uint32_t)pdata;
|
|
/* Output data length in bytes */
|
|
REG(AES_DMAC_CH1_DMALENGTH) = pdata_len;
|
|
}
|
|
|
|
return CRYPTO_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ccm_auth_encrypt_check_status(void)
|
|
{
|
|
return !!(REG(AES_CTRL_INT_STAT) &
|
|
(AES_CTRL_INT_STAT_DMA_BUS_ERR | AES_CTRL_INT_STAT_KEY_ST_WR_ERR |
|
|
AES_CTRL_INT_STAT_KEY_ST_RD_ERR | AES_CTRL_INT_STAT_RESULT_AV));
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ccm_auth_encrypt_get_result(void *mic, uint8_t mic_len)
|
|
{
|
|
uint32_t aes_ctrl_int_stat;
|
|
uint32_t tag[4];
|
|
|
|
aes_ctrl_int_stat = REG(AES_CTRL_INT_STAT);
|
|
/* Clear the error bits */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR |
|
|
AES_CTRL_INT_CLR_KEY_ST_WR_ERR |
|
|
AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
|
|
|
|
nvic_interrupt_disable(NVIC_INT_AES);
|
|
crypto_register_process_notification(NULL);
|
|
|
|
/* Disable the master control / DMA clock */
|
|
REG(AES_CTRL_ALG_SEL) = 0x00000000;
|
|
|
|
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
|
|
return CRYPTO_DMA_BUS_ERROR;
|
|
}
|
|
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_WR_ERR) {
|
|
return AES_KEYSTORE_WRITE_ERROR;
|
|
}
|
|
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
|
|
return AES_KEYSTORE_READ_ERROR;
|
|
}
|
|
|
|
/* Read tag
|
|
* Wait for the context ready bit */
|
|
while(!(REG(AES_AES_CTRL) & AES_AES_CTRL_SAVED_CONTEXT_READY));
|
|
|
|
/* Read the tag registers */
|
|
tag[0] = REG(AES_AES_TAG_OUT_0);
|
|
tag[1] = REG(AES_AES_TAG_OUT_1);
|
|
tag[2] = REG(AES_AES_TAG_OUT_2);
|
|
tag[3] = REG(AES_AES_TAG_OUT_3);
|
|
|
|
/* Clear the interrupt status */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
|
|
AES_CTRL_INT_CLR_RESULT_AV;
|
|
|
|
/* Copy tag to MIC */
|
|
rom_util_memcpy(mic, tag, mic_len);
|
|
|
|
return CRYPTO_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ccm_auth_decrypt_start(uint8_t len_len, uint8_t key_area, const void *nonce,
|
|
const void *adata, uint16_t adata_len, void *cdata,
|
|
uint16_t cdata_len, uint8_t mic_len,
|
|
struct process *process)
|
|
{
|
|
uint16_t pdata_len = cdata_len - mic_len;
|
|
uint32_t iv[4];
|
|
|
|
if(REG(AES_CTRL_ALG_SEL) != 0x00000000) {
|
|
return CRYPTO_RESOURCE_IN_USE;
|
|
}
|
|
|
|
/* Workaround for AES registers not retained after PM2 */
|
|
REG(AES_CTRL_INT_CFG) = AES_CTRL_INT_CFG_LEVEL;
|
|
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_DMA_IN_DONE |
|
|
AES_CTRL_INT_EN_RESULT_AV;
|
|
|
|
REG(AES_CTRL_ALG_SEL) = AES_CTRL_ALG_SEL_AES;
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
|
|
AES_CTRL_INT_CLR_RESULT_AV;
|
|
|
|
REG(AES_KEY_STORE_READ_AREA) = key_area;
|
|
|
|
/* Wait until key is loaded to the AES module */
|
|
while(REG(AES_KEY_STORE_READ_AREA) & AES_KEY_STORE_READ_AREA_BUSY);
|
|
|
|
/* Check for Key Store read error */
|
|
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
|
|
/* Clear the Keystore Read error bit */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
|
|
/* Disable the master control / DMA clock */
|
|
REG(AES_CTRL_ALG_SEL) = 0x00000000;
|
|
return AES_KEYSTORE_READ_ERROR;
|
|
}
|
|
|
|
/* Prepare the decryption initialization vector
|
|
* Flags: L' = L - 1 */
|
|
((uint8_t *)iv)[0] = len_len - 1;
|
|
/* Nonce */
|
|
rom_util_memcpy(&((uint8_t *)iv)[1], nonce, 15 - len_len);
|
|
/* Initialize counter to 0 */
|
|
rom_util_memset(&((uint8_t *)iv)[16 - len_len], 0, len_len);
|
|
|
|
/* Write initialization vector */
|
|
REG(AES_AES_IV_0) = iv[0];
|
|
REG(AES_AES_IV_1) = iv[1];
|
|
REG(AES_AES_IV_2) = iv[2];
|
|
REG(AES_AES_IV_3) = iv[3];
|
|
|
|
/* Program AES-CCM decryption */
|
|
REG(AES_AES_CTRL) = AES_AES_CTRL_SAVE_CONTEXT | /* Save context */
|
|
(((MAX(mic_len, 2) - 2) >> 1) << AES_AES_CTRL_CCM_M_S) | /* M */
|
|
((len_len - 1) << AES_AES_CTRL_CCM_L_S) | /* L */
|
|
AES_AES_CTRL_CCM | /* CCM */
|
|
AES_AES_CTRL_CTR_WIDTH_128 | /* CTR width 128 */
|
|
AES_AES_CTRL_CTR; /* CTR */
|
|
|
|
/* Write the length of the crypto block (lo) */
|
|
REG(AES_AES_C_LENGTH_0) = pdata_len;
|
|
/* Write the length of the crypto block (hi) */
|
|
REG(AES_AES_C_LENGTH_1) = 0;
|
|
|
|
/* Write the length of the AAD data block (may be non-block size-aligned) */
|
|
REG(AES_AES_AUTH_LENGTH) = adata_len;
|
|
|
|
if(adata_len != 0) {
|
|
/* Configure DMAC to fetch the AAD data
|
|
* Enable DMA channel 0 */
|
|
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
|
|
/* Base address of the AAD input data in ext. memory */
|
|
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)adata;
|
|
/* AAD data length in bytes */
|
|
REG(AES_DMAC_CH0_DMALENGTH) = adata_len;
|
|
|
|
/* Wait for completion of the AAD data transfer, DMA_IN_DONE */
|
|
while(!(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_IN_DONE));
|
|
|
|
/* Check for the absence of error */
|
|
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
|
|
/* Clear the DMA error */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR;
|
|
/* Disable the master control / DMA clock */
|
|
REG(AES_CTRL_ALG_SEL) = 0x00000000;
|
|
return CRYPTO_DMA_BUS_ERROR;
|
|
}
|
|
}
|
|
|
|
/* Clear interrupt status */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
|
|
AES_CTRL_INT_CLR_RESULT_AV;
|
|
|
|
if(process != NULL) {
|
|
crypto_register_process_notification(process);
|
|
nvic_interrupt_unpend(NVIC_INT_AES);
|
|
nvic_interrupt_enable(NVIC_INT_AES);
|
|
}
|
|
|
|
/* Enable result available bit in interrupt enable */
|
|
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_RESULT_AV;
|
|
|
|
if(pdata_len != 0) {
|
|
/* Configure DMAC
|
|
* Enable DMA channel 0 */
|
|
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
|
|
/* Base address of the payload data in ext. memory */
|
|
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)cdata;
|
|
/* Payload data length in bytes */
|
|
REG(AES_DMAC_CH0_DMALENGTH) = pdata_len;
|
|
|
|
/* Enable DMA channel 1 */
|
|
REG(AES_DMAC_CH1_CTRL) = AES_DMAC_CH_CTRL_EN;
|
|
/* Base address of the output data buffer */
|
|
REG(AES_DMAC_CH1_EXTADDR) = (uint32_t)cdata;
|
|
/* Output data length in bytes */
|
|
REG(AES_DMAC_CH1_DMALENGTH) = pdata_len;
|
|
}
|
|
|
|
return CRYPTO_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ccm_auth_decrypt_check_status(void)
|
|
{
|
|
/* Check if result is available or some error has occured */
|
|
return ccm_auth_encrypt_check_status();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ccm_auth_decrypt_get_result(const void *cdata, uint16_t cdata_len,
|
|
void *mic, uint8_t mic_len)
|
|
{
|
|
uint32_t aes_ctrl_int_stat;
|
|
uint16_t pdata_len = cdata_len - mic_len;
|
|
uint32_t tag[4];
|
|
|
|
aes_ctrl_int_stat = REG(AES_CTRL_INT_STAT);
|
|
/* Clear the error bits */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR |
|
|
AES_CTRL_INT_CLR_KEY_ST_WR_ERR |
|
|
AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
|
|
|
|
nvic_interrupt_disable(NVIC_INT_AES);
|
|
crypto_register_process_notification(NULL);
|
|
|
|
/* Disable the master control / DMA clock */
|
|
REG(AES_CTRL_ALG_SEL) = 0x00000000;
|
|
|
|
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
|
|
return CRYPTO_DMA_BUS_ERROR;
|
|
}
|
|
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_WR_ERR) {
|
|
return AES_KEYSTORE_WRITE_ERROR;
|
|
}
|
|
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
|
|
return AES_KEYSTORE_READ_ERROR;
|
|
}
|
|
|
|
/* Read tag
|
|
* Wait for the context ready bit */
|
|
while(!(REG(AES_AES_CTRL) & AES_AES_CTRL_SAVED_CONTEXT_READY));
|
|
|
|
/* Read the tag registers */
|
|
tag[0] = REG(AES_AES_TAG_OUT_0);
|
|
tag[1] = REG(AES_AES_TAG_OUT_1);
|
|
tag[2] = REG(AES_AES_TAG_OUT_2);
|
|
tag[3] = REG(AES_AES_TAG_OUT_3);
|
|
|
|
/* Clear the interrupt status */
|
|
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
|
|
AES_CTRL_INT_CLR_RESULT_AV;
|
|
|
|
/* Check MIC */
|
|
if(rom_util_memcmp(tag, &((const uint8_t *)cdata)[pdata_len], mic_len)) {
|
|
return CCM_AUTHENTICATION_FAILED;
|
|
}
|
|
|
|
/* Copy tag to MIC */
|
|
rom_util_memcpy(mic, tag, mic_len);
|
|
|
|
return CRYPTO_SUCCESS;
|
|
}
|
|
|
|
/** @} */
|