osd-contiki/platform/avr-rss2/Makefile.avr-rss2
2016-02-22 20:46:07 +01:00

62 lines
1.6 KiB
Makefile

CONTIKI_TARGET_DIRS = . apps net loader dev
CONTIKI_CORE=contiki-main
CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o
CONTIKI_TARGET_SOURCEFILES += contiki-main.c params.c battery-sensor.c i2c.c
CONTIKI_TARGET_SOURCEFILES += sensors.c button-sensor.c slip_uart0.c slip.c leds.c temp_mcu-sensor.c light-sensor.c adc.c cfs-eeprom.c eeprom.c pulse-sensor.c
CONTIKI_TARGET_SOURCEFILES += temp-sensor.c
CONTIKI_TARGET_SOURCEFILES += enc28j60_avr.c
CONTIKI_TARGET_SOURCEFILES += co2_sa_kxx-sensor.c
CONTIKIAVR=$(CONTIKI)/cpu/avr
CONTIKIBOARD=.
ifdef $(MCU)
MCU=$(MCU)
else
MCU=atmega256rfr2
endif
ifeq ($(MCU),atmega128rfa1)
CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAUTO_CRC_PADDING=2
BOOTLOADER_START = 0x1E000
endif
ifeq ($(MCU),atmega128rfr2)
CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAUTO_CRC_PADDING=2
BOOTLOADER_START = 0x1E000
endif
ifeq ($(MCU),atmega256rfr2)
CONTIKI_PLAT_DEFS = -DF_CPU=16000000UL -DAUTO_CRC_PADDING=2
BOOTLOADER_START = 0x3E000
endif
AVRDUDE_PROGRAMMER=jtag2
# For usb devices, you may either use PORT=usb, or (e.g. if you have more than one
# programmer connected) you can use the following trick to find out the serial number:
#
# The example is for an JTAGICE mkII used to program an ATmega128:
# avrdude -v -P usb:xxxx -c jtag2 -p atmega128
AVRDUDE_PORT=usb:00B000000D79
# Additional avrdude options
# Verify off
AVRDUDE_OPTIONS=-V
AVRDUDE_MCU=m256rfr2
include $(CONTIKIAVR)/Makefile.avr
include $(CONTIKIAVR)/radio/Makefile.radio
#MODULES += core/net/mac core/net core/net/mac/sicslowmac core/net/mac/contikimac core/net/llsec core/net/rime
MODULES += core/net/mac core/net core/net/mac/sicslowmac core/net/mac/contikimac core/net/llsec