138 lines
4 KiB
Plaintext
138 lines
4 KiB
Plaintext
/*
|
|
* Sample arduino sketch using contiki features.
|
|
* We turn the LED off
|
|
* We allow read the moisture sensor
|
|
* Unfortunately sleeping for long times in loop() isn't currently
|
|
* possible, something turns off the CPU (including PWM outputs) if a
|
|
* Proto-Thread is taking too long. We need to find out how to sleep in
|
|
* a Contiki-compatible way.
|
|
* Note that for a normal arduino sketch you won't have to include any
|
|
* of the contiki-specific files here, the sketch should just work.
|
|
*/
|
|
|
|
#include <Wire.h>
|
|
#include "DHT.h"
|
|
|
|
extern "C" {
|
|
#include "arduino-process.h"
|
|
#include "rest-engine.h"
|
|
#include "net/netstack.h"
|
|
|
|
extern resource_t res_dhtatemp, res_dhtahum, res_battery;
|
|
extern resource_t res_dhtbtemp, res_dhtbhum;
|
|
extern resource_t res_dhtctemp, res_dhtchum;
|
|
|
|
#define LED_PIN 4
|
|
|
|
// Uncomment whatever type you're using!
|
|
//#define DHTTYPE DHT11 // DHT 11
|
|
#define DHTTYPE DHT22 // DHT 22 (AM2302), AM2321
|
|
//#define DHTTYPE DHT21 // DHT 21 (AM2301)
|
|
|
|
// Connect pin 1 (on the left) of the sensor to +3.3V
|
|
// Connect pin 2 of the sensor to whatever your DHTPIN is
|
|
// Connect pin 4 (on the right) of the sensor to GROUND
|
|
// Connect a 10K resistor from pin 2 (data) to pin 1 (power) o
|
|
#define DHTPINA 7 // what digital pin we're connected to
|
|
DHT dhta(DHTPINA, DHTTYPE);
|
|
|
|
#define DHTPINB 8 // what digital pin we're connected to
|
|
DHT dhtb(DHTPINB, DHTTYPE);
|
|
|
|
#define DHTPINC 9 // what digital pin we're connected to
|
|
DHT dhtc(DHTPINC, DHTTYPE);
|
|
|
|
float dhta_hum;
|
|
float dhta_temp;
|
|
char dhta_hum_s[8];
|
|
char dhta_temp_s[8];
|
|
|
|
float dhtb_hum;
|
|
float dhtb_temp;
|
|
char dhtb_hum_s[8];
|
|
char dhtb_temp_s[8];
|
|
|
|
float dhtc_hum;
|
|
float dhtc_temp;
|
|
char dhtc_hum_s[8];
|
|
char dhtc_temp_s[8];
|
|
|
|
}
|
|
|
|
void setup (void)
|
|
{
|
|
// NETSTACK_MAC.off(1); // reciever always on
|
|
printf("DHT Sensor\n");
|
|
// switch off the led
|
|
pinMode(LED_PIN, OUTPUT);
|
|
digitalWrite(LED_PIN, HIGH);
|
|
// DHT sensor
|
|
dhta.begin();
|
|
dhtb.begin();
|
|
dhtc.begin();
|
|
// init coap resourcen
|
|
rest_init_engine ();
|
|
#pragma GCC diagnostic ignored "-Wwrite-strings"
|
|
rest_activate_resource (&res_dhtatemp, "s/tempa");
|
|
rest_activate_resource (&res_dhtahum, "s/huma");
|
|
rest_activate_resource (&res_dhtbtemp, "s/tempb");
|
|
rest_activate_resource (&res_dhtbhum, "s/humb");
|
|
rest_activate_resource (&res_dhtctemp, "s/tempc");
|
|
rest_activate_resource (&res_dhtchum, "s/humc");
|
|
rest_activate_resource (&res_battery, "s/battery");
|
|
#pragma GCC diagnostic pop
|
|
mcu_sleep_set(128); // Power consumtion 278uA; average over 20 minutes
|
|
}
|
|
|
|
// at project-conf.h
|
|
// LOOP_INTERVAL (30 * CLOCK_SECOND)
|
|
void loop (void)
|
|
{
|
|
int errdht=0;
|
|
// Reading temperature or humidity takes about 250 milliseconds!
|
|
// Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
|
|
dhta_hum = dhta.readHumidity();
|
|
dhtb_hum = dhtb.readHumidity();
|
|
dhtc_hum = dhtc.readHumidity();
|
|
// Read temperature as Celsius (the default)
|
|
dhta_temp = dhta.readTemperature();
|
|
dhtb_temp = dhtb.readTemperature();
|
|
dhtc_temp = dhtc.readTemperature();
|
|
|
|
// Check if any reads failed and exit early (to try again).
|
|
if (isnan(dhta_hum) || isnan(dhta_temp)) {
|
|
printf("Failed to read from DHTa sensor!\n");
|
|
errdht=1;
|
|
}
|
|
if (isnan(dhtb_hum) || isnan(dhtb_temp)) {
|
|
printf("Failed to read from DHTb sensor!\n");
|
|
errdht=1;
|
|
}
|
|
if (isnan(dhtc_hum) || isnan(dhtc_temp)) {
|
|
printf("Failed to read from DHTc sensor!\n");
|
|
errdht=1;
|
|
}
|
|
if (errdht){
|
|
return;
|
|
}
|
|
|
|
dtostrf(dhta_temp , 0, 2, dhta_temp_s );
|
|
dtostrf(dhta_hum , 0, 2, dhta_hum_s );
|
|
|
|
dtostrf(dhtb_temp , 0, 2, dhtb_temp_s );
|
|
dtostrf(dhtb_hum , 0, 2, dhtb_hum_s );
|
|
|
|
dtostrf(dhtc_temp , 0, 2, dhtc_temp_s );
|
|
dtostrf(dhtc_hum , 0, 2, dhtc_hum_s );
|
|
|
|
// debug only
|
|
printf("Tempa: '%s'",dhta_temp_s);
|
|
printf("\t\tHuma: '%s'\n",dhta_hum_s);
|
|
|
|
printf("Tempb: '%s'",dhtb_temp_s);
|
|
printf("\t\tHumb: '%s'\n",dhtb_hum_s);
|
|
|
|
printf("Tempc: '%s'",dhtc_temp_s);
|
|
printf("\t\tHumc: '%s'\n",dhtc_hum_s);
|
|
}
|