osd-contiki/examples/osd/embedd-vm-merkurboard/Makefile
Ralf Schlatterbeck 04bbba6c12 Multi-platform support, osd-merkur-{128,256}
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is
now osd-merkur-128. Also check that everything is consistent.
Add both platforms to the regression tests.
Move redundant files in platform dev directory of both platforms to
cpu/avr/dev. Note that this probably needs some rework. Already
discovered some inconsistency in io definitions of both devices in the
avr/io.h includes. Added a workaround in the obvious cases.
The platform makefiles now set correct parameters for bootloader and for
reading mac-address from flash memory.
Factor the flash programming into cpu/avr and platform/osd-merkur* and
rework *all* osd example makefiles to use the new settings. Also update
all the flash.sh and run.sh to use the new settings.
The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:59:40 +02:00

72 lines
1.7 KiB
Makefile

EXE=embedd-vm-server
all: $(EXE)
# use this target explicitly if requried: er-plugtest-server
# variable for this Makefile
CONTIKI=../../..
# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
PROJECT_SOURCEFILES += embedvm.c
# variable for Makefile.include
ifneq ($(TARGET), minimal-net)
CFLAGS += -DUIP_CONF_IPV6_RPL=1
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
CFLAGS += -DUIP_CONF_IPV6_RPL=0
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
endif
# linker optimizations
SMALL=1
# REST framework, requires WITH_COAP
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
# optional rules to get assembly
#CUSTOM_RULE_C_TO_OBJECTDIR_O = 1
#CUSTOM_RULE_S_TO_OBJECTDIR_O = 1
include $(CONTIKI)/Makefile.include
# optional rules to get assembly
#$(OBJECTDIR)/%.o: asmdir/%.S
# $(CC) $(CFLAGS) -MMD -c $< -o $@
# @$(FINALIZE_DEPENDENCY)
#
#asmdir/%.S: %.c
# $(CC) $(CFLAGS) -MMD -S $< -o $@
# border router rules
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
connect-minimal:
sudo ip address add fdfd::1/64 dev tap0
avr-size: $(EXE).$(TARGET).sz
flash: $(EXE).$(TARGET).u $(EXE).$(TARGET).eu
.PHONY: flash avr-size
.PRECIOUS: $(EXE).$(TARGET).hex $(EXE).$(TARGET).eep