deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/cpu/cc253x/Makefile.cc253x
George Oikonomou 29090a3dda The cc253x Makefile specifies SoC flavor 
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256

- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
2012-04-20 16:03:38 +01:00

209 lines
6.5 KiB
Text
Raw Blame History

### Compiler definitions
CC = sdcc
LD = sdcc
AS = sdcc
AR = sdcclib
OBJCOPY = objcopy
STRIP = strip
### Hex file conversions
PACKIHX = packihx
SREC_CAT = srec_cat
SREC_FLAGS = -disable_sequence_warnings
BANK_ALLOC = $(CONTIKI_CPU)/bank-alloc.py
SEGMENT_RULES = $(OBJECTDIR)/segment.rules
CFLAGS += --model-$(MEMORY_MODEL) --stack-auto --std-c99
CFLAGS += -DCC2530_LAST_FLASH_BANK=$(HIGH_FLASH_BANK)
LDFLAGS += --model-$(MEMORY_MODEL) --stack-auto --out-fmt-ihx
LDFLAGS += --xram-loc 0x0000 --xram-size 0x1F00
LDFLAGS += --code-loc $(START_ADDR) --code-size $(CODE_SIZE)
ASFLAGS += -plosgff
AROPTS = -a
### Our object files are .rel, so we can't use the default finalize dependency
### generation. Override here.
define FINALIZE_SDCC_DEPENDENCY
cp $(@:.rel=.d) $(@:.rel=.$$$$); \
sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
-e '/^$$/ d' -e 's/$$/ :/' < $(@:.rel=.$$$$) >> $(@:.rel=.d); \
rm -f $(@:.rel=.$$$$)
endef
### SoC flavor (F256, F128, F64, F32) as the ID of the last flash bank (0...7)
### We assume F256, project Makefile can override
###
### ToDo:
### Fix --code-size accordingly
### Fix the bank allocator to play for all flavors
ifndef HIGH_FLASH_BANK
HIGH_FLASH_BANK=7
endif
### Banking Guesswork:
### Generic examples do not specify banking.
### We automatically turn it on if its unspecified and if we are building with
### UIP_CONF_IPV6
ifndef HAVE_BANKING
ifeq ($(UIP_CONF_IPV6),1)
HAVE_BANKING=1
else
HAVE_BANKING=0
endif
endif
### Does the project want us to offset the firmware?
### define start address and max code size accordingly
ifeq ($(OFFSET_FIRMWARE),1)
START_ADDR = 0x01000
HOME_START = 00001000
ifeq ($(HAVE_BANKING),1)
CODE_SIZE = 0x3F000
else
CODE_SIZE = 0x0F000
endif
else
START_ADDR = 0x00000
HOME_START = 00000000
ifeq ($(HAVE_BANKING),1)
CODE_SIZE = 0x40000
else
CODE_SIZE = 0x10000
endif
endif
### Are we building with BANKing supoprt?
ifeq ($(HAVE_BANKING),1)
## Yes
MEMORY_MODEL=huge
LDFLAGS += -Wl-r
LD_PRE_FLAGS += -Wl-bBANK1=0x018000
CFLAGS += -DHAVE_SDCC_BANKING
#use this in $(call c_seg,$<) to get segment for a source file.
c_seg = --codeseg $(shell python $(BANK_ALLOC) $1 $(SEGMENT_RULES) $2)
else
## No banking
MEMORY_MODEL=large
c_seg =
endif
### CPU-dependent cleanup files
CLEAN += *.lnk *.lk *.sym *.lib *.ihx *.rel *.mem *.rst *.asm *.hex
CLEAN += *.omf *.cdb *.banks *.flags *.banked-hex
CLEAN += symbols.c symbols.h
### CPU-dependent directories
CONTIKI_CPU_DIRS = . dev
### CPU-dependent source files
CONTIKI_SOURCEFILES += soc.c clock.c
CONTIKI_SOURCEFILES += uart0.c uart1.c uart-intr.c
CONTIKI_SOURCEFILES += dma.c dma_intr.c
CONTIKI_SOURCEFILES += cc2530-rf.c
CONTIKI_SOURCEFILES += watchdog.c rtimer-arch.c
CONTIKI_ASMFILES +=
CONTIKI_ASMOBJECTFILES = $(addprefix $(OBJECTDIR)/,$(CONTIKI_ASMFILES:.S=.rel))
CONTIKI_CASMOBJECTFILES = $(addprefix $(OBJECTDIR)/, \
$(CONTIKI_CASMFILES:.cS=.rel))
CONTIKI_PLATFORM_DIRS = $(PLATFORM_APPDIRS) \
$(addprefix $(CONTIKI)/platform/$(TARGET)/, $(CONTIKI_TARGET_DIRS))
CONTIKI_CPU_DIRS_LIST = $(addprefix $(CONTIKI_CPU)/, \
$(CONTIKI_CPU_DIRS))
oname = $(patsubst %.c,%.rel,$(patsubst %.S,%.rel,$(1)))
CONTIKI_OBJECTFILES = $(addprefix $(OBJECTDIR)/, \
$(call oname, $(CONTIKI_SOURCEFILES)))
PROJECT_OBJECTFILES = $(addprefix $(OBJECTDIR)/, \
$(call oname, $(PROJECT_SOURCEFILES)))
### Compilation rules
SEGMENT_RULE_FILES = $(foreach dir, . $(CONTIKI_PLATFORM_DIRS) \
$(CONTIKI_CPU_DIRS_LIST), $(wildcard $(dir)/segment.rules) )
$(SEGMENT_RULES): $(SEGMENT_RULE_FILES)
cat $(SEGMENT_RULE_FILES) | \
sed -e 's/#.*$$//' -e 's/^\s*//' -e '/^$$/d' > $@
CUSTOM_RULE_LINK=1
CUSTOM_RULE_C_TO_OBJECTDIR_O=1
CUSTOM_RULE_ALLOBJS_TO_TARGETLIB=1
$(OBJECTDIR)/%.rel: %.c $(SEGMENT_RULES)
$(CC) $(call c_seg,$<,$@) $(CFLAGS) -c $< -o $@ -Wp,-MMD,$(@:.rel=.d),-MQ,$@
@$(FINALIZE_SDCC_DEPENDENCY)
$(OBJECTDIR)/%.rel: %.cS
cp $< $(OBJECTDIR)/$*.c
$(CC) $(CFLAGS) -E $(OBJECTDIR)/$*.c > $(OBJECTDIR)/tmp
perl -pe "s/^#(.*)/;$$1/" $(OBJECTDIR)/tmp > $(OBJECTDIR)/$*.S
$(AS) $(ASFLAGS) -o $@ $(OBJECTDIR)/$*.S
rm -f $(OBJECTDIR)/tmp
contiki-$(TARGET).lib: $(CONTIKI_OBJECTFILES) $(PROJECT_OBJECTFILES) \
$(CONTIKI_ASMOBJECTFILES) $(CONTIKI_CASMOBJECTFILES)
rm -f $@
for target in $^; do echo $$target >> $@; done
.PRECIOUS: %.$(TARGET) %.hex
# build app/example local object files. We need a separate rule so that we can
# pass -DAUTOSTART_ENABLE for those files only
$(OBJECTDIR)/%.app.rel: %.c $(SEGMENT_RULES)
$(CC) $(call c_seg,$<,$@) -DAUTOSTART_ENABLE $(CFLAGS) -c $< -o $@
# .ihx is the sdcc binary output file
ifeq ($(HAVE_BANKING),1)
### Build bankable firmware
%.ihx: $(OBJECTDIR)/%.app.rel $(CONTIKI_TARGET_MAIN) contiki-$(TARGET).lib
@echo "\nFirst Link"
@echo "==============="
$(CC) $(LDFLAGS) $(LD_PRE_FLAGS) -o $@ $(CONTIKI_TARGET_MAIN) $(OBJECTDIR)/$*.app.rel -llibsdcc.lib -lcontiki-$(TARGET).lib > /dev/null
%.flags: %.ihx
### Allocate modules to banks and relocate object files
@echo "\nBank Allocation"
@echo "==============="
python $(BANK_ALLOC) $(basename $(@F)) $(SEGMENT_RULES) $(OFFSET_FIRMWARE)
%.banked-hex: %.flags
### Link again with new bank allocations
@echo "\nFinal Link"
@echo "==============="
$(CC) $(LDFLAGS) $(shell cat $<) -o $@ $(CONTIKI_TARGET_MAIN) $(OBJECTDIR)/$*.app.rel -llibsdcc.lib -lcontiki-$(TARGET).lib > /dev/null
%.hex: %.banked-hex
### Post-process the hex file for programmers which dislike SDCC output hex format
$(eval BANKS := $(shell egrep '(^BANK[0-9])=' $(@:.hex=.map) | sed -e 's/BANK\([0-9]\).*/\1/' | uniq))
$(eval FILES := $(addsuffix .hex,$(addprefix bank,$(BANKS))))
@echo "\nPack hex file"
@echo "==============="
@for bank in $(BANKS); do \
echo $(SREC_CAT) $(SREC_FLAGS) $(@:.hex=.banked-hex) -intel \
-crop 0x"$$bank"8000 "0x"$$bank"FFFF" \
-offset -$$((0x8000 * $$bank + 0x08000)) -o bank"$$bank".hex -intel; \
$(SREC_CAT) $(SREC_FLAGS) $(@:.hex=.banked-hex) -intel \
-crop 0x"$$bank"8000 "0x"$$bank"FFFF" \
-offset -$$((0x8000 * $$bank + 0x08000)) -o bank"$$bank".hex -intel; \
done
$(SREC_CAT) $(SREC_FLAGS) $(@:.hex=.banked-hex) -intel -crop 0x00000 0x07FFF -o home.ihx -intel
srec_cat home.ihx -intel $(foreach file,$(FILES),$(file) -intel) -o $@ -intel
rm -f home.ihx $(FILES)
else
### Build non-banked firmware
%.ihx: $(OBJECTDIR)/%.app.rel $(CONTIKI_TARGET_MAIN) contiki-$(TARGET).lib
$(CC) $(LDFLAGS) -o $@ $(CONTIKI_TARGET_MAIN) $(OBJECTDIR)/$*.app.rel -llibsdcc.lib -lcontiki-$(TARGET).lib > /dev/null
%.hex: %.ihx
$(PACKIHX) $< > $@
endif
Reference in a new issue View git blame Copy permalink