osd-contiki/cpu/cc2538/dev/ccm.c
Benoît Thébaudeau e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00

414 lines
14 KiB
C

/*
* Original file:
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Port to Contiki:
* Copyright (c) 2013, ADVANSEE - http://www.advansee.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-ccm
* @{
*
* \file
* Implementation of the cc2538 AES-CCM driver
*/
#include "contiki.h"
#include "sys/cc.h"
#include "dev/rom-util.h"
#include "dev/nvic.h"
#include "dev/ccm.h"
#include "reg.h"
#include <stdbool.h>
#include <stdint.h>
/*---------------------------------------------------------------------------*/
uint8_t
ccm_auth_encrypt_start(uint8_t len_len, uint8_t key_area, const void *nonce,
const void *adata, uint16_t adata_len, void *pdata,
uint16_t pdata_len, uint8_t mic_len,
struct process *process)
{
uint32_t iv[4];
if(REG(AES_CTRL_ALG_SEL) != 0x00000000) {
return CRYPTO_RESOURCE_IN_USE;
}
/* Workaround for AES registers not retained after PM2 */
REG(AES_CTRL_INT_CFG) = AES_CTRL_INT_CFG_LEVEL;
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_DMA_IN_DONE |
AES_CTRL_INT_EN_RESULT_AV;
REG(AES_CTRL_ALG_SEL) = AES_CTRL_ALG_SEL_AES;
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
REG(AES_KEY_STORE_READ_AREA) = key_area;
/* Wait until key is loaded to the AES module */
while(REG(AES_KEY_STORE_READ_AREA) & AES_KEY_STORE_READ_AREA_BUSY);
/* Check for Key Store read error */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
/* Clear the Keystore Read error bit */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return AES_KEYSTORE_READ_ERROR;
}
/* Prepare the encryption initialization vector
* Flags: L' = L - 1 */
((uint8_t *)iv)[0] = len_len - 1;
/* Nonce */
rom_util_memcpy(&((uint8_t *)iv)[1], nonce, 15 - len_len);
/* Initialize counter to 0 */
rom_util_memset(&((uint8_t *)iv)[16 - len_len], 0, len_len);
/* Write initialization vector */
REG(AES_AES_IV_0) = iv[0];
REG(AES_AES_IV_1) = iv[1];
REG(AES_AES_IV_2) = iv[2];
REG(AES_AES_IV_3) = iv[3];
/* Program AES-CCM encryption */
REG(AES_AES_CTRL) = AES_AES_CTRL_SAVE_CONTEXT | /* Save context */
(((MAX(mic_len, 2) - 2) >> 1) << AES_AES_CTRL_CCM_M_S) | /* M */
((len_len - 1) << AES_AES_CTRL_CCM_L_S) | /* L */
AES_AES_CTRL_CCM | /* CCM */
AES_AES_CTRL_CTR_WIDTH_128 | /* CTR width 128 */
AES_AES_CTRL_CTR | /* CTR */
AES_AES_CTRL_DIRECTION_ENCRYPT; /* Encryption */
/* Write the length of the crypto block (lo) */
REG(AES_AES_C_LENGTH_0) = pdata_len;
/* Write the length of the crypto block (hi) */
REG(AES_AES_C_LENGTH_1) = 0;
/* Write the length of the AAD data block (may be non-block size-aligned) */
REG(AES_AES_AUTH_LENGTH) = adata_len;
if(adata_len != 0) {
/* Configure DMAC to fetch the AAD data
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the AAD input data in ext. memory */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)adata;
/* AAD data length in bytes */
REG(AES_DMAC_CH0_DMALENGTH) = adata_len;
/* Wait for completion of the AAD data transfer, DMA_IN_DONE */
while(!(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_IN_DONE));
/* Check for the absence of error */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
/* Clear the DMA error */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR;
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return CRYPTO_DMA_BUS_ERROR;
}
}
/* Clear interrupt status */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
if(process != NULL) {
crypto_register_process_notification(process);
nvic_interrupt_unpend(NVIC_INT_AES);
nvic_interrupt_enable(NVIC_INT_AES);
}
/* Enable result available bit in interrupt enable */
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_RESULT_AV;
if(pdata_len != 0) {
/* Configure DMAC
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the payload data in ext. memory */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)pdata;
/* Payload data length in bytes */
REG(AES_DMAC_CH0_DMALENGTH) = pdata_len;
/* Enable DMA channel 1 */
REG(AES_DMAC_CH1_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the output data buffer */
REG(AES_DMAC_CH1_EXTADDR) = (uint32_t)pdata;
/* Output data length in bytes */
REG(AES_DMAC_CH1_DMALENGTH) = pdata_len;
}
return CRYPTO_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
ccm_auth_encrypt_check_status(void)
{
return !!(REG(AES_CTRL_INT_STAT) &
(AES_CTRL_INT_STAT_DMA_BUS_ERR | AES_CTRL_INT_STAT_KEY_ST_WR_ERR |
AES_CTRL_INT_STAT_KEY_ST_RD_ERR | AES_CTRL_INT_STAT_RESULT_AV));
}
/*---------------------------------------------------------------------------*/
uint8_t
ccm_auth_encrypt_get_result(void *mic, uint8_t mic_len)
{
uint32_t aes_ctrl_int_stat;
uint32_t tag[4];
aes_ctrl_int_stat = REG(AES_CTRL_INT_STAT);
/* Clear the error bits */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR |
AES_CTRL_INT_CLR_KEY_ST_WR_ERR |
AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
nvic_interrupt_disable(NVIC_INT_AES);
crypto_register_process_notification(NULL);
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
return CRYPTO_DMA_BUS_ERROR;
}
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_WR_ERR) {
return AES_KEYSTORE_WRITE_ERROR;
}
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
return AES_KEYSTORE_READ_ERROR;
}
/* Read tag
* Wait for the context ready bit */
while(!(REG(AES_AES_CTRL) & AES_AES_CTRL_SAVED_CONTEXT_READY));
/* Read the tag registers */
tag[0] = REG(AES_AES_TAG_OUT_0);
tag[1] = REG(AES_AES_TAG_OUT_1);
tag[2] = REG(AES_AES_TAG_OUT_2);
tag[3] = REG(AES_AES_TAG_OUT_3);
/* Clear the interrupt status */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
/* Copy tag to MIC */
rom_util_memcpy(mic, tag, mic_len);
return CRYPTO_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
ccm_auth_decrypt_start(uint8_t len_len, uint8_t key_area, const void *nonce,
const void *adata, uint16_t adata_len, void *cdata,
uint16_t cdata_len, uint8_t mic_len,
struct process *process)
{
uint16_t pdata_len = cdata_len - mic_len;
uint32_t iv[4];
if(REG(AES_CTRL_ALG_SEL) != 0x00000000) {
return CRYPTO_RESOURCE_IN_USE;
}
/* Workaround for AES registers not retained after PM2 */
REG(AES_CTRL_INT_CFG) = AES_CTRL_INT_CFG_LEVEL;
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_DMA_IN_DONE |
AES_CTRL_INT_EN_RESULT_AV;
REG(AES_CTRL_ALG_SEL) = AES_CTRL_ALG_SEL_AES;
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
REG(AES_KEY_STORE_READ_AREA) = key_area;
/* Wait until key is loaded to the AES module */
while(REG(AES_KEY_STORE_READ_AREA) & AES_KEY_STORE_READ_AREA_BUSY);
/* Check for Key Store read error */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
/* Clear the Keystore Read error bit */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return AES_KEYSTORE_READ_ERROR;
}
/* Prepare the decryption initialization vector
* Flags: L' = L - 1 */
((uint8_t *)iv)[0] = len_len - 1;
/* Nonce */
rom_util_memcpy(&((uint8_t *)iv)[1], nonce, 15 - len_len);
/* Initialize counter to 0 */
rom_util_memset(&((uint8_t *)iv)[16 - len_len], 0, len_len);
/* Write initialization vector */
REG(AES_AES_IV_0) = iv[0];
REG(AES_AES_IV_1) = iv[1];
REG(AES_AES_IV_2) = iv[2];
REG(AES_AES_IV_3) = iv[3];
/* Program AES-CCM decryption */
REG(AES_AES_CTRL) = AES_AES_CTRL_SAVE_CONTEXT | /* Save context */
(((MAX(mic_len, 2) - 2) >> 1) << AES_AES_CTRL_CCM_M_S) | /* M */
((len_len - 1) << AES_AES_CTRL_CCM_L_S) | /* L */
AES_AES_CTRL_CCM | /* CCM */
AES_AES_CTRL_CTR_WIDTH_128 | /* CTR width 128 */
AES_AES_CTRL_CTR; /* CTR */
/* Write the length of the crypto block (lo) */
REG(AES_AES_C_LENGTH_0) = pdata_len;
/* Write the length of the crypto block (hi) */
REG(AES_AES_C_LENGTH_1) = 0;
/* Write the length of the AAD data block (may be non-block size-aligned) */
REG(AES_AES_AUTH_LENGTH) = adata_len;
if(adata_len != 0) {
/* Configure DMAC to fetch the AAD data
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the AAD input data in ext. memory */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)adata;
/* AAD data length in bytes */
REG(AES_DMAC_CH0_DMALENGTH) = adata_len;
/* Wait for completion of the AAD data transfer, DMA_IN_DONE */
while(!(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_IN_DONE));
/* Check for the absence of error */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
/* Clear the DMA error */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR;
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return CRYPTO_DMA_BUS_ERROR;
}
}
/* Clear interrupt status */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
if(process != NULL) {
crypto_register_process_notification(process);
nvic_interrupt_unpend(NVIC_INT_AES);
nvic_interrupt_enable(NVIC_INT_AES);
}
/* Enable result available bit in interrupt enable */
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_RESULT_AV;
if(pdata_len != 0) {
/* Configure DMAC
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the payload data in ext. memory */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)cdata;
/* Payload data length in bytes */
REG(AES_DMAC_CH0_DMALENGTH) = pdata_len;
/* Enable DMA channel 1 */
REG(AES_DMAC_CH1_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the output data buffer */
REG(AES_DMAC_CH1_EXTADDR) = (uint32_t)cdata;
/* Output data length in bytes */
REG(AES_DMAC_CH1_DMALENGTH) = pdata_len;
}
return CRYPTO_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
ccm_auth_decrypt_check_status(void)
{
/* Check if result is available or some error has occured */
return ccm_auth_encrypt_check_status();
}
/*---------------------------------------------------------------------------*/
uint8_t
ccm_auth_decrypt_get_result(const void *cdata, uint16_t cdata_len,
void *mic, uint8_t mic_len)
{
uint32_t aes_ctrl_int_stat;
uint16_t pdata_len = cdata_len - mic_len;
uint32_t tag[4];
aes_ctrl_int_stat = REG(AES_CTRL_INT_STAT);
/* Clear the error bits */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR |
AES_CTRL_INT_CLR_KEY_ST_WR_ERR |
AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
nvic_interrupt_disable(NVIC_INT_AES);
crypto_register_process_notification(NULL);
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
return CRYPTO_DMA_BUS_ERROR;
}
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_WR_ERR) {
return AES_KEYSTORE_WRITE_ERROR;
}
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
return AES_KEYSTORE_READ_ERROR;
}
/* Read tag
* Wait for the context ready bit */
while(!(REG(AES_AES_CTRL) & AES_AES_CTRL_SAVED_CONTEXT_READY));
/* Read the tag registers */
tag[0] = REG(AES_AES_TAG_OUT_0);
tag[1] = REG(AES_AES_TAG_OUT_1);
tag[2] = REG(AES_AES_TAG_OUT_2);
tag[3] = REG(AES_AES_TAG_OUT_3);
/* Clear the interrupt status */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
/* Check MIC */
if(rom_util_memcmp(tag, &((const uint8_t *)cdata)[pdata_len], mic_len)) {
return CCM_AUTHENTICATION_FAILED;
}
/* Copy tag to MIC */
rom_util_memcpy(mic, tag, mic_len);
return CRYPTO_SUCCESS;
}
/** @} */