324d03b53c
Prior to this patch, the ieee radio driver did not explicitly abort the rx operation or power down the analog components of the radio prior to shutting down the rf-core. The result of this was that the rf-core continued to use a lot of power even while "off". This patch fixes this problem.
545 lines
16 KiB
C
545 lines
16 KiB
C
/*
|
|
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup rf-core
|
|
* @{
|
|
*
|
|
* \file
|
|
* Implementation of the CC13xx/CC26xx RF core driver
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "contiki-conf.h"
|
|
#include "dev/watchdog.h"
|
|
#include "sys/process.h"
|
|
#include "sys/energest.h"
|
|
#include "net/netstack.h"
|
|
#include "net/packetbuf.h"
|
|
#include "net/rime/rimestats.h"
|
|
#include "rf-core/rf-core.h"
|
|
#include "ti-lib.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
/* RF core and RF HAL API */
|
|
#include "hw_rfc_dbell.h"
|
|
#include "hw_rfc_pwr.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
/* RF Core Mailbox API */
|
|
#include "rf-core/api/mailbox.h"
|
|
#include "rf-core/api/common_cmd.h"
|
|
#include "rf-core/api/ble_cmd.h"
|
|
#include "rf-core/api/ieee_cmd.h"
|
|
#include "rf-core/api/data_entry.h"
|
|
#include "rf-core/api/ble_mailbox.h"
|
|
#include "rf-core/api/ieee_mailbox.h"
|
|
#include "rf-core/api/prop_mailbox.h"
|
|
#include "rf-core/api/prop_cmd.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
#define DEBUG 0
|
|
#if DEBUG
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...)
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
#ifdef __GNUC__
|
|
#define CC_ALIGN_ATTR(n) __attribute__ ((aligned(n)))
|
|
#else
|
|
#define CC_ALIGN_ATTR(n)
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
#ifdef RF_CORE_CONF_DEBUG_CRC
|
|
#define RF_CORE_DEBUG_CRC RF_CORE_CONF_DEBUG_CRC
|
|
#else
|
|
#define RF_CORE_DEBUG_CRC DEBUG
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
/* RF interrupts */
|
|
#define RX_FRAME_IRQ IRQ_RX_ENTRY_DONE
|
|
#define ERROR_IRQ IRQ_INTERNAL_ERROR
|
|
#define RX_NOK_IRQ IRQ_RX_NOK
|
|
|
|
/* Those IRQs are enabled all the time */
|
|
#if RF_CORE_DEBUG_CRC
|
|
#define ENABLED_IRQS (RX_FRAME_IRQ | ERROR_IRQ | RX_NOK_IRQ)
|
|
#else
|
|
#define ENABLED_IRQS (RX_FRAME_IRQ | ERROR_IRQ)
|
|
#endif
|
|
|
|
#define cc26xx_rf_cpe0_isr RFCCPE0IntHandler
|
|
#define cc26xx_rf_cpe1_isr RFCCPE1IntHandler
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Remember the last Radio Op issued to the radio */
|
|
static rfc_radioOp_t *last_radio_op = NULL;
|
|
/*---------------------------------------------------------------------------*/
|
|
/* A struct holding pointers to the primary mode's abort() and restore() */
|
|
static const rf_core_primary_mode_t *primary_mode = NULL;
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS(rf_core_process, "CC13xx / CC26xx RF driver");
|
|
/*---------------------------------------------------------------------------*/
|
|
#define RF_CORE_CLOCKS_MASK (RFC_PWR_PWMCLKEN_RFC_M | RFC_PWR_PWMCLKEN_CPE_M \
|
|
| RFC_PWR_PWMCLKEN_CPERAM_M)
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
rf_core_is_accessible()
|
|
{
|
|
if(ti_lib_prcm_rf_ready() &&
|
|
ti_lib_prcm_power_domain_status(PRCM_DOMAIN_RFCORE) ==
|
|
PRCM_DOMAIN_POWER_ON) {
|
|
return RF_CORE_ACCESSIBLE;
|
|
}
|
|
return RF_CORE_NOT_ACCESSIBLE;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint_fast8_t
|
|
rf_core_send_cmd(uint32_t cmd, uint32_t *status)
|
|
{
|
|
uint32_t timeout_count = 0;
|
|
bool interrupts_disabled;
|
|
bool is_radio_op = false;
|
|
|
|
/* If cmd is 4-byte aligned, then it's a radio OP. Clear the status field */
|
|
if((cmd & 0x03) == 0) {
|
|
is_radio_op = true;
|
|
((rfc_radioOp_t *)cmd)->status = RF_CORE_RADIO_OP_STATUS_IDLE;
|
|
}
|
|
|
|
/*
|
|
* Make sure ContikiMAC doesn't turn us off from within an interrupt while
|
|
* we are accessing RF Core registers
|
|
*/
|
|
interrupts_disabled = ti_lib_int_master_disable();
|
|
|
|
if(!rf_core_is_accessible()) {
|
|
PRINTF("rf_core_send_cmd: RF was off\n");
|
|
if(!interrupts_disabled) {
|
|
ti_lib_int_master_enable();
|
|
}
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
if(is_radio_op) {
|
|
uint16_t command_no = ((rfc_radioOp_t *)cmd)->commandNo;
|
|
if((command_no & RF_CORE_COMMAND_PROTOCOL_MASK) != RF_CORE_COMMAND_PROTOCOL_COMMON &&
|
|
(command_no & RF_CORE_COMMAND_TYPE_MASK) == RF_CORE_COMMAND_TYPE_RADIO_OP) {
|
|
last_radio_op = (rfc_radioOp_t *)cmd;
|
|
}
|
|
}
|
|
|
|
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_CMDR) = cmd;
|
|
do {
|
|
*status = HWREG(RFC_DBELL_BASE + RFC_DBELL_O_CMDSTA);
|
|
if(++timeout_count > 50000) {
|
|
PRINTF("rf_core_send_cmd: 0x%08lx Timeout\n", cmd);
|
|
if(!interrupts_disabled) {
|
|
ti_lib_int_master_enable();
|
|
}
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
} while(*status == RF_CORE_CMDSTA_PENDING);
|
|
|
|
if(!interrupts_disabled) {
|
|
ti_lib_int_master_enable();
|
|
}
|
|
|
|
/*
|
|
* If we reach here the command is no longer pending. It is either completed
|
|
* successfully or with error
|
|
*/
|
|
return (*status & RF_CORE_CMDSTA_RESULT_MASK) == RF_CORE_CMDSTA_DONE;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint_fast8_t
|
|
rf_core_wait_cmd_done(void *cmd)
|
|
{
|
|
volatile rfc_radioOp_t *command = (rfc_radioOp_t *)cmd;
|
|
uint32_t timeout_cnt = 0;
|
|
|
|
/*
|
|
* 0xn4nn=DONE, 0x0400=DONE_OK while all other "DONE" values means done
|
|
* but with some kind of error (ref. "Common radio operation status codes")
|
|
*/
|
|
do {
|
|
if(++timeout_cnt > 500000) {
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
} while((command->status & RF_CORE_RADIO_OP_MASKED_STATUS)
|
|
!= RF_CORE_RADIO_OP_MASKED_STATUS_DONE);
|
|
|
|
return (command->status & RF_CORE_RADIO_OP_MASKED_STATUS)
|
|
== RF_CORE_RADIO_OP_STATUS_DONE_OK;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
fs_powerdown(void)
|
|
{
|
|
rfc_CMD_FS_POWERDOWN_t cmd;
|
|
uint32_t cmd_status;
|
|
|
|
rf_core_init_radio_op((rfc_radioOp_t *)&cmd, sizeof(cmd), CMD_FS_POWERDOWN);
|
|
|
|
if(rf_core_send_cmd((uint32_t)&cmd, &cmd_status) != RF_CORE_CMD_OK) {
|
|
PRINTF("fs_powerdown: CMDSTA=0x%08lx\n", cmd_status);
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
if(rf_core_wait_cmd_done(&cmd) != RF_CORE_CMD_OK) {
|
|
PRINTF("fs_powerdown: CMDSTA=0x%08lx, status=0x%04x\n",
|
|
cmd_status, cmd.status);
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
return RF_CORE_CMD_OK;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
rf_core_power_up()
|
|
{
|
|
uint32_t cmd_status;
|
|
bool interrupts_disabled = ti_lib_int_master_disable();
|
|
|
|
ti_lib_int_pend_clear(INT_RF_CPE0);
|
|
ti_lib_int_pend_clear(INT_RF_CPE1);
|
|
ti_lib_int_disable(INT_RF_CPE0);
|
|
ti_lib_int_disable(INT_RF_CPE1);
|
|
|
|
/* Enable RF Core power domain */
|
|
ti_lib_prcm_power_domain_on(PRCM_DOMAIN_RFCORE);
|
|
while(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_RFCORE)
|
|
!= PRCM_DOMAIN_POWER_ON);
|
|
|
|
ti_lib_prcm_domain_enable(PRCM_DOMAIN_RFCORE);
|
|
ti_lib_prcm_load_set();
|
|
while(!ti_lib_prcm_load_get());
|
|
|
|
while(!rf_core_is_accessible()) {
|
|
PRINTF("rf_core_power_up: Not ready\n");
|
|
}
|
|
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = 0x0;
|
|
ti_lib_int_enable(INT_RF_CPE0);
|
|
ti_lib_int_enable(INT_RF_CPE1);
|
|
|
|
if(!interrupts_disabled) {
|
|
ti_lib_int_master_enable();
|
|
}
|
|
|
|
/* Let CPE boot */
|
|
HWREG(RFC_PWR_NONBUF_BASE + RFC_PWR_O_PWMCLKEN) = RF_CORE_CLOCKS_MASK;
|
|
|
|
/* Send ping (to verify RFCore is ready and alive) */
|
|
if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_PING), &cmd_status) != RF_CORE_CMD_OK) {
|
|
PRINTF("rf_core_power_up: CMD_PING fail, CMDSTA=0x%08lx\n", cmd_status);
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
return RF_CORE_CMD_OK;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_power_down()
|
|
{
|
|
bool interrupts_disabled = ti_lib_int_master_disable();
|
|
ti_lib_int_disable(INT_RF_CPE0);
|
|
ti_lib_int_disable(INT_RF_CPE1);
|
|
|
|
if(rf_core_is_accessible()) {
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = 0x0;
|
|
|
|
/* need to send FS_POWERDOWN or analog components will use power */
|
|
fs_powerdown();
|
|
}
|
|
|
|
/* Shut down the RFCORE clock domain in the MCU VD */
|
|
ti_lib_prcm_domain_disable(PRCM_DOMAIN_RFCORE);
|
|
ti_lib_prcm_load_set();
|
|
while(!ti_lib_prcm_load_get());
|
|
|
|
/* Turn off RFCORE PD */
|
|
ti_lib_prcm_power_domain_off(PRCM_DOMAIN_RFCORE);
|
|
while(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_RFCORE)
|
|
!= PRCM_DOMAIN_POWER_OFF);
|
|
|
|
ti_lib_int_pend_clear(INT_RF_CPE0);
|
|
ti_lib_int_pend_clear(INT_RF_CPE1);
|
|
ti_lib_int_enable(INT_RF_CPE0);
|
|
ti_lib_int_enable(INT_RF_CPE1);
|
|
if(!interrupts_disabled) {
|
|
ti_lib_int_master_enable();
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
rf_core_set_modesel()
|
|
{
|
|
uint8_t rv = RF_CORE_CMD_ERROR;
|
|
|
|
if(ti_lib_chipinfo_chip_family_is_cc26xx()) {
|
|
if(ti_lib_chipinfo_supports_ble() == true &&
|
|
ti_lib_chipinfo_supports_ieee_802_15_4() == true) {
|
|
/* CC2650 */
|
|
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE5;
|
|
rv = RF_CORE_CMD_OK;
|
|
} else if(ti_lib_chipinfo_supports_ble() == false &&
|
|
ti_lib_chipinfo_supports_ieee_802_15_4() == true) {
|
|
/* CC2630 */
|
|
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE2;
|
|
rv = RF_CORE_CMD_OK;
|
|
}
|
|
} else if(ti_lib_chipinfo_chip_family_is_cc13xx()) {
|
|
if(ti_lib_chipinfo_supports_ble() == false &&
|
|
ti_lib_chipinfo_supports_ieee_802_15_4() == false) {
|
|
/* CC1310 */
|
|
HWREG(PRCM_BASE + PRCM_O_RFCMODESEL) = PRCM_RFCMODESEL_CURR_MODE3;
|
|
rv = RF_CORE_CMD_OK;
|
|
}
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
rf_core_start_rat()
|
|
{
|
|
uint32_t cmd_status;
|
|
|
|
/* Start radio timer (RAT) */
|
|
if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_START_RAT), &cmd_status)
|
|
!= RF_CORE_CMD_OK) {
|
|
PRINTF("rf_core_apply_patches: START_RAT fail, CMDSTA=0x%08lx\n",
|
|
cmd_status);
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
return RF_CORE_CMD_OK;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
rf_core_boot()
|
|
{
|
|
if(rf_core_power_up() != RF_CORE_CMD_OK) {
|
|
PRINTF("rf_core_boot: rf_core_power_up() failed\n");
|
|
|
|
rf_core_power_down();
|
|
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
if(rf_core_start_rat() != RF_CORE_CMD_OK) {
|
|
PRINTF("rf_core_boot: rf_core_start_rat() failed\n");
|
|
|
|
rf_core_power_down();
|
|
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
|
|
return RF_CORE_CMD_OK;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_setup_interrupts()
|
|
{
|
|
bool interrupts_disabled;
|
|
|
|
/* We are already turned on by the caller, so this should not happen */
|
|
if(!rf_core_is_accessible()) {
|
|
PRINTF("setup_interrupts: No access\n");
|
|
return;
|
|
}
|
|
|
|
/* Disable interrupts */
|
|
interrupts_disabled = ti_lib_int_master_disable();
|
|
|
|
/* Set all interrupt channels to CPE0 channel, error to CPE1 */
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEISL) = ERROR_IRQ;
|
|
|
|
/* Acknowledge configured interrupts */
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = ENABLED_IRQS;
|
|
|
|
/* Clear interrupt flags, active low clear(?) */
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
|
|
|
|
ti_lib_int_pend_clear(INT_RF_CPE0);
|
|
ti_lib_int_pend_clear(INT_RF_CPE1);
|
|
ti_lib_int_enable(INT_RF_CPE0);
|
|
ti_lib_int_enable(INT_RF_CPE1);
|
|
|
|
if(!interrupts_disabled) {
|
|
ti_lib_int_master_enable();
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_cmd_done_en(bool fg)
|
|
{
|
|
uint32_t irq = fg ? IRQ_LAST_FG_COMMAND_DONE : IRQ_LAST_COMMAND_DONE;
|
|
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = ENABLED_IRQS;
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = ENABLED_IRQS | irq;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_cmd_done_dis()
|
|
{
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = ENABLED_IRQS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
rfc_radioOp_t *
|
|
rf_core_get_last_radio_op()
|
|
{
|
|
return last_radio_op;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_init_radio_op(rfc_radioOp_t *op, uint16_t len, uint16_t command)
|
|
{
|
|
memset(op, 0, len);
|
|
|
|
op->commandNo = command;
|
|
op->condition.rule = COND_NEVER;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_primary_mode_register(const rf_core_primary_mode_t *mode)
|
|
{
|
|
primary_mode = mode;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rf_core_primary_mode_abort()
|
|
{
|
|
if(primary_mode) {
|
|
if(primary_mode->abort) {
|
|
primary_mode->abort();
|
|
}
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
uint8_t
|
|
rf_core_primary_mode_restore()
|
|
{
|
|
if(primary_mode) {
|
|
if(primary_mode->restore) {
|
|
return primary_mode->restore();
|
|
}
|
|
}
|
|
|
|
return RF_CORE_CMD_ERROR;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS_THREAD(rf_core_process, ev, data)
|
|
{
|
|
int len;
|
|
|
|
PROCESS_BEGIN();
|
|
|
|
while(1) {
|
|
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
|
|
do {
|
|
watchdog_periodic();
|
|
packetbuf_clear();
|
|
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
|
|
|
|
if(len > 0) {
|
|
packetbuf_set_datalen(len);
|
|
|
|
NETSTACK_RDC.input();
|
|
}
|
|
} while(len > 0);
|
|
}
|
|
PROCESS_END();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
rx_nok_isr(void)
|
|
{
|
|
RIMESTATS_ADD(badcrc);
|
|
PRINTF("RF: Bad CRC\n");
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc26xx_rf_cpe1_isr(void)
|
|
{
|
|
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
|
|
|
PRINTF("RF Error\n");
|
|
|
|
if(!rf_core_is_accessible()) {
|
|
if(rf_core_power_up() != RF_CORE_CMD_OK) {
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Clear interrupt flags */
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
|
|
|
|
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc26xx_rf_cpe0_isr(void)
|
|
{
|
|
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
|
|
|
if(!rf_core_is_accessible()) {
|
|
printf("RF ISR called but RF not ready... PANIC!!\n");
|
|
if(rf_core_power_up() != RF_CORE_CMD_OK) {
|
|
PRINTF("rf_core_power_up() failed\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
ti_lib_int_master_disable();
|
|
|
|
if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & RX_FRAME_IRQ) {
|
|
process_poll(&rf_core_process);
|
|
}
|
|
|
|
if(RF_CORE_DEBUG_CRC) {
|
|
if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & RX_NOK_IRQ) {
|
|
rx_nok_isr();
|
|
}
|
|
}
|
|
|
|
/* Clear interrupt flags */
|
|
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
|
|
ti_lib_int_master_enable();
|
|
|
|
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @} */
|