osd-contiki/examples/zolertia/z1/ipv6/z1-websense

Z1 websense

This example features a simple webserver running on top of the IPv6 contiki stack on Zolertia Z1 motes to provide sensor values, and with a RPL border router to bridge the sensor network to Internet.

To test the example in COOJA under Linux

1. Start COOJA and load the simulation "example-z1-websense.csc"

   make TARGET=cooja example-z1-websense.csc

2. Connect to the COOJA simulation using tunslip6:

   make connect-router-cooja

3. You should now be able to browse to the nodes using your web browser: Router: http://[aaaa::0212:7401:0001:0101]/ Node 2: http://[aaaa::0212:7402:0002:0202]/

To run the example on real nodes under Linux

1. Program the nodes with the websense application

   make TARGET=z1 z1-websense.upload

2. Disconnect the nodes and program one node with the RPL border router

   cd ../rpl-border-router && make TARGET=z1 border-router.upload

3. Connect to the border router using tunslip6:

   make connect-router

4. Reboot the router and note the router IP address

5. You should now be able to browse to your router node using your web browser: http://[]/. On this page you should see a list of all accessible nodes with their IP adresses.