osd-contiki/cpu/mc1322x/dev/uart1.h
maralvira 419906a769 initial mc1322x commit
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-10 14:55:39 +00:00

66 lines
2.5 KiB
C

/*
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
* to the MC1322x project (http://mc1322x.devl.org) and Contiki.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki OS.
*
* $Id: uart1.h,v 1.1 2010/06/10 14:55:39 maralvira Exp $
*/
/*
This file exists as a work-around for the hardware dependant calls
to slip_arch_init.
Current the prototype for slip_arch_init is slip_arch_init(urb)
and a typical call is something like
slip_arch_init(BAUD2URB(115200))
BAUD2UBR is hardware specific, however. Furthermore, for the sky
platform it's typically defined with #include "dev/uart1.h" (see
rpl-boarder-router/slip-bridge.c), a sky specific file. dev/uart1.h
includes msp430.h which includes the sky contiki-conf.h which
defines BAUD2UBR.
To me, the correct think to pass is simply the baudrate and have the
hardware specific conversion happen inside slip_arch_init.
Notably, most implementations just ignore the passed parameter
anyway. (except AVR)
*/
#ifndef DEV_UART1_H
#define DEV_UART1_H
#define BAUD2UBR(x) x
#endif