546 lines
16 KiB
C
546 lines
16 KiB
C
/*
|
|
twi.c - TWI/I2C library for Wiring & Arduino
|
|
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with this library; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts
|
|
*/
|
|
|
|
#include <math.h>
|
|
#include <stdlib.h>
|
|
#include <inttypes.h>
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
#include <compat/twi.h>
|
|
#include "Arduino.h" // for digitalWrite
|
|
|
|
#ifndef cbi
|
|
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
|
#endif
|
|
|
|
#ifndef sbi
|
|
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
|
#endif
|
|
|
|
#include "pins_arduino.h"
|
|
#include "twi.h"
|
|
|
|
static volatile uint8_t twi_state;
|
|
static volatile uint8_t twi_slarw;
|
|
static volatile uint8_t twi_sendStop; // should the transaction end with a stop
|
|
static volatile uint8_t twi_inRepStart; // in the middle of a repeated start
|
|
|
|
static void (*twi_onSlaveTransmit)(void);
|
|
static void (*twi_onSlaveReceive)(uint8_t*, int);
|
|
|
|
static uint8_t twi_masterBuffer[TWI_BUFFER_LENGTH];
|
|
static volatile uint8_t twi_masterBufferIndex;
|
|
static volatile uint8_t twi_masterBufferLength;
|
|
|
|
static uint8_t twi_txBuffer[TWI_BUFFER_LENGTH];
|
|
static volatile uint8_t twi_txBufferIndex;
|
|
static volatile uint8_t twi_txBufferLength;
|
|
|
|
static uint8_t twi_rxBuffer[TWI_BUFFER_LENGTH];
|
|
static volatile uint8_t twi_rxBufferIndex;
|
|
|
|
static volatile uint8_t twi_error;
|
|
|
|
/*
|
|
* Function twi_init
|
|
* Desc readys twi pins and sets twi bitrate
|
|
* Input none
|
|
* Output none
|
|
*/
|
|
void twi_init(void)
|
|
{
|
|
// initialize state
|
|
twi_state = TWI_READY;
|
|
twi_sendStop = true; // default value
|
|
twi_inRepStart = false;
|
|
|
|
// activate internal pullups for twi.
|
|
digitalWrite(SDA, 1);
|
|
digitalWrite(SCL, 1);
|
|
|
|
// initialize twi prescaler and bit rate
|
|
cbi(TWSR, TWPS0);
|
|
cbi(TWSR, TWPS1);
|
|
TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
|
|
|
|
/* twi bit rate formula from atmega128 manual pg 204
|
|
SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR))
|
|
note: TWBR should be 10 or higher for master mode
|
|
It is 72 for a 16mhz Wiring board with 100kHz TWI */
|
|
|
|
// enable twi module, acks, and twi interrupt
|
|
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
|
|
}
|
|
|
|
/*
|
|
* Function twi_disable
|
|
* Desc disables twi pins
|
|
* Input none
|
|
* Output none
|
|
*/
|
|
void twi_disable(void)
|
|
{
|
|
// disable twi module, acks, and twi interrupt
|
|
TWCR &= ~(_BV(TWEN) | _BV(TWIE) | _BV(TWEA));
|
|
|
|
// deactivate internal pullups for twi.
|
|
digitalWrite(SDA, 0);
|
|
digitalWrite(SCL, 0);
|
|
}
|
|
|
|
/*
|
|
* Function twi_slaveInit
|
|
* Desc sets slave address and enables interrupt
|
|
* Input none
|
|
* Output none
|
|
*/
|
|
void twi_setAddress(uint8_t address)
|
|
{
|
|
// set twi slave address (skip over TWGCE bit)
|
|
TWAR = address << 1;
|
|
}
|
|
|
|
/*
|
|
* Function twi_readFrom
|
|
* Desc attempts to become twi bus master and read a
|
|
* series of bytes from a device on the bus
|
|
* Input address: 7bit i2c device address
|
|
* data: pointer to byte array
|
|
* length: number of bytes to read into array
|
|
* sendStop: Boolean indicating whether to send a stop at the end
|
|
* Output number of bytes read
|
|
*/
|
|
uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length, uint8_t sendStop)
|
|
{
|
|
uint8_t i;
|
|
|
|
// ensure data will fit into buffer
|
|
if(TWI_BUFFER_LENGTH < length){
|
|
return 0;
|
|
}
|
|
|
|
// wait until twi is ready, become master receiver
|
|
while(TWI_READY != twi_state){
|
|
continue;
|
|
}
|
|
twi_state = TWI_MRX;
|
|
twi_sendStop = sendStop;
|
|
// reset error state (0xFF.. no error occured)
|
|
twi_error = 0xFF;
|
|
|
|
// initialize buffer iteration vars
|
|
twi_masterBufferIndex = 0;
|
|
twi_masterBufferLength = length-1; // This is not intuitive, read on...
|
|
// On receive, the previously configured ACK/NACK setting is transmitted in
|
|
// response to the received byte before the interrupt is signalled.
|
|
// Therefor we must actually set NACK when the _next_ to last byte is
|
|
// received, causing that NACK to be sent in response to receiving the last
|
|
// expected byte of data.
|
|
|
|
// build sla+w, slave device address + w bit
|
|
twi_slarw = TW_READ;
|
|
twi_slarw |= address << 1;
|
|
|
|
if (true == twi_inRepStart) {
|
|
// if we're in the repeated start state, then we've already sent the start,
|
|
// (@@@ we hope), and the TWI statemachine is just waiting for the address byte.
|
|
// We need to remove ourselves from the repeated start state before we enable interrupts,
|
|
// since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning
|
|
// up. Also, don't enable the START interrupt. There may be one pending from the
|
|
// repeated start that we sent outselves, and that would really confuse things.
|
|
twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR
|
|
do {
|
|
TWDR = twi_slarw;
|
|
} while(TWCR & _BV(TWWC));
|
|
TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START
|
|
}
|
|
else
|
|
// send start condition
|
|
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
|
|
|
|
// wait for read operation to complete
|
|
while(TWI_MRX == twi_state){
|
|
continue;
|
|
}
|
|
|
|
if (twi_masterBufferIndex < length)
|
|
length = twi_masterBufferIndex;
|
|
|
|
// copy twi buffer to data
|
|
for(i = 0; i < length; ++i){
|
|
data[i] = twi_masterBuffer[i];
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
/*
|
|
* Function twi_writeTo
|
|
* Desc attempts to become twi bus master and write a
|
|
* series of bytes to a device on the bus
|
|
* Input address: 7bit i2c device address
|
|
* data: pointer to byte array
|
|
* length: number of bytes in array
|
|
* wait: boolean indicating to wait for write or not
|
|
* sendStop: boolean indicating whether or not to send a stop at the end
|
|
* Output 0 .. success
|
|
* 1 .. length to long for buffer
|
|
* 2 .. address send, NACK received
|
|
* 3 .. data send, NACK received
|
|
* 4 .. other twi error (lost bus arbitration, bus error, ..)
|
|
*/
|
|
uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait, uint8_t sendStop)
|
|
{
|
|
uint8_t i;
|
|
|
|
// ensure data will fit into buffer
|
|
if(TWI_BUFFER_LENGTH < length){
|
|
return 1;
|
|
}
|
|
|
|
// wait until twi is ready, become master transmitter
|
|
while(TWI_READY != twi_state){
|
|
continue;
|
|
}
|
|
twi_state = TWI_MTX;
|
|
twi_sendStop = sendStop;
|
|
// reset error state (0xFF.. no error occured)
|
|
twi_error = 0xFF;
|
|
|
|
// initialize buffer iteration vars
|
|
twi_masterBufferIndex = 0;
|
|
twi_masterBufferLength = length;
|
|
|
|
// copy data to twi buffer
|
|
for(i = 0; i < length; ++i){
|
|
twi_masterBuffer[i] = data[i];
|
|
}
|
|
|
|
// build sla+w, slave device address + w bit
|
|
twi_slarw = TW_WRITE;
|
|
twi_slarw |= address << 1;
|
|
|
|
// if we're in a repeated start, then we've already sent the START
|
|
// in the ISR. Don't do it again.
|
|
//
|
|
if (true == twi_inRepStart) {
|
|
// if we're in the repeated start state, then we've already sent the start,
|
|
// (@@@ we hope), and the TWI statemachine is just waiting for the address byte.
|
|
// We need to remove ourselves from the repeated start state before we enable interrupts,
|
|
// since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning
|
|
// up. Also, don't enable the START interrupt. There may be one pending from the
|
|
// repeated start that we sent outselves, and that would really confuse things.
|
|
twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR
|
|
do {
|
|
TWDR = twi_slarw;
|
|
} while(TWCR & _BV(TWWC));
|
|
TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START
|
|
}
|
|
else
|
|
// send start condition
|
|
TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE) | _BV(TWSTA); // enable INTs
|
|
|
|
// wait for write operation to complete
|
|
while(wait && (TWI_MTX == twi_state)){
|
|
continue;
|
|
}
|
|
|
|
if (twi_error == 0xFF)
|
|
return 0; // success
|
|
else if (twi_error == TW_MT_SLA_NACK)
|
|
return 2; // error: address send, nack received
|
|
else if (twi_error == TW_MT_DATA_NACK)
|
|
return 3; // error: data send, nack received
|
|
else
|
|
return 4; // other twi error
|
|
}
|
|
|
|
/*
|
|
* Function twi_transmit
|
|
* Desc fills slave tx buffer with data
|
|
* must be called in slave tx event callback
|
|
* Input data: pointer to byte array
|
|
* length: number of bytes in array
|
|
* Output 1 length too long for buffer
|
|
* 2 not slave transmitter
|
|
* 0 ok
|
|
*/
|
|
uint8_t twi_transmit(const uint8_t* data, uint8_t length)
|
|
{
|
|
uint8_t i;
|
|
|
|
// ensure data will fit into buffer
|
|
if(TWI_BUFFER_LENGTH < length){
|
|
return 1;
|
|
}
|
|
|
|
// ensure we are currently a slave transmitter
|
|
if(TWI_STX != twi_state){
|
|
return 2;
|
|
}
|
|
|
|
// set length and copy data into tx buffer
|
|
twi_txBufferLength = length;
|
|
for(i = 0; i < length; ++i){
|
|
twi_txBuffer[i] = data[i];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function twi_attachSlaveRxEvent
|
|
* Desc sets function called before a slave read operation
|
|
* Input function: callback function to use
|
|
* Output none
|
|
*/
|
|
void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) )
|
|
{
|
|
twi_onSlaveReceive = function;
|
|
}
|
|
|
|
/*
|
|
* Function twi_attachSlaveTxEvent
|
|
* Desc sets function called before a slave write operation
|
|
* Input function: callback function to use
|
|
* Output none
|
|
*/
|
|
void twi_attachSlaveTxEvent( void (*function)(void) )
|
|
{
|
|
twi_onSlaveTransmit = function;
|
|
}
|
|
|
|
/*
|
|
* Function twi_reply
|
|
* Desc sends byte or readys receive line
|
|
* Input ack: byte indicating to ack or to nack
|
|
* Output none
|
|
*/
|
|
void twi_reply(uint8_t ack)
|
|
{
|
|
// transmit master read ready signal, with or without ack
|
|
if(ack){
|
|
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
|
|
}else{
|
|
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Function twi_stop
|
|
* Desc relinquishes bus master status
|
|
* Input none
|
|
* Output none
|
|
*/
|
|
void twi_stop(void)
|
|
{
|
|
// send stop condition
|
|
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
|
|
|
|
// wait for stop condition to be exectued on bus
|
|
// TWINT is not set after a stop condition!
|
|
while(TWCR & _BV(TWSTO)){
|
|
continue;
|
|
}
|
|
|
|
// update twi state
|
|
twi_state = TWI_READY;
|
|
}
|
|
|
|
/*
|
|
* Function twi_releaseBus
|
|
* Desc releases bus control
|
|
* Input none
|
|
* Output none
|
|
*/
|
|
void twi_releaseBus(void)
|
|
{
|
|
// release bus
|
|
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
|
|
|
|
// update twi state
|
|
twi_state = TWI_READY;
|
|
}
|
|
|
|
ISR(TWI_vect)
|
|
{
|
|
switch(TW_STATUS){
|
|
// All Master
|
|
case TW_START: // sent start condition
|
|
case TW_REP_START: // sent repeated start condition
|
|
// copy device address and r/w bit to output register and ack
|
|
TWDR = twi_slarw;
|
|
twi_reply(1);
|
|
break;
|
|
|
|
// Master Transmitter
|
|
case TW_MT_SLA_ACK: // slave receiver acked address
|
|
case TW_MT_DATA_ACK: // slave receiver acked data
|
|
// if there is data to send, send it, otherwise stop
|
|
if(twi_masterBufferIndex < twi_masterBufferLength){
|
|
// copy data to output register and ack
|
|
TWDR = twi_masterBuffer[twi_masterBufferIndex++];
|
|
twi_reply(1);
|
|
}else{
|
|
if (twi_sendStop)
|
|
twi_stop();
|
|
else {
|
|
twi_inRepStart = true; // we're gonna send the START
|
|
// don't enable the interrupt. We'll generate the start, but we
|
|
// avoid handling the interrupt until we're in the next transaction,
|
|
// at the point where we would normally issue the start.
|
|
TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ;
|
|
twi_state = TWI_READY;
|
|
}
|
|
}
|
|
break;
|
|
case TW_MT_SLA_NACK: // address sent, nack received
|
|
twi_error = TW_MT_SLA_NACK;
|
|
twi_stop();
|
|
break;
|
|
case TW_MT_DATA_NACK: // data sent, nack received
|
|
twi_error = TW_MT_DATA_NACK;
|
|
twi_stop();
|
|
break;
|
|
case TW_MT_ARB_LOST: // lost bus arbitration
|
|
twi_error = TW_MT_ARB_LOST;
|
|
twi_releaseBus();
|
|
break;
|
|
|
|
// Master Receiver
|
|
case TW_MR_DATA_ACK: // data received, ack sent
|
|
// put byte into buffer
|
|
twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
|
|
case TW_MR_SLA_ACK: // address sent, ack received
|
|
// ack if more bytes are expected, otherwise nack
|
|
if(twi_masterBufferIndex < twi_masterBufferLength){
|
|
twi_reply(1);
|
|
}else{
|
|
twi_reply(0);
|
|
}
|
|
break;
|
|
case TW_MR_DATA_NACK: // data received, nack sent
|
|
// put final byte into buffer
|
|
twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
|
|
if (twi_sendStop)
|
|
twi_stop();
|
|
else {
|
|
twi_inRepStart = true; // we're gonna send the START
|
|
// don't enable the interrupt. We'll generate the start, but we
|
|
// avoid handling the interrupt until we're in the next transaction,
|
|
// at the point where we would normally issue the start.
|
|
TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ;
|
|
twi_state = TWI_READY;
|
|
}
|
|
break;
|
|
case TW_MR_SLA_NACK: // address sent, nack received
|
|
twi_stop();
|
|
break;
|
|
// TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case
|
|
|
|
// Slave Receiver
|
|
case TW_SR_SLA_ACK: // addressed, returned ack
|
|
case TW_SR_GCALL_ACK: // addressed generally, returned ack
|
|
case TW_SR_ARB_LOST_SLA_ACK: // lost arbitration, returned ack
|
|
case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack
|
|
// enter slave receiver mode
|
|
twi_state = TWI_SRX;
|
|
// indicate that rx buffer can be overwritten and ack
|
|
twi_rxBufferIndex = 0;
|
|
twi_reply(1);
|
|
break;
|
|
case TW_SR_DATA_ACK: // data received, returned ack
|
|
case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack
|
|
// if there is still room in the rx buffer
|
|
if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
|
|
// put byte in buffer and ack
|
|
twi_rxBuffer[twi_rxBufferIndex++] = TWDR;
|
|
twi_reply(1);
|
|
}else{
|
|
// otherwise nack
|
|
twi_reply(0);
|
|
}
|
|
break;
|
|
case TW_SR_STOP: // stop or repeated start condition received
|
|
// ack future responses and leave slave receiver state
|
|
twi_releaseBus();
|
|
// put a null char after data if there's room
|
|
if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
|
|
twi_rxBuffer[twi_rxBufferIndex] = '\0';
|
|
}
|
|
// callback to user defined callback
|
|
twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex);
|
|
// since we submit rx buffer to "wire" library, we can reset it
|
|
twi_rxBufferIndex = 0;
|
|
break;
|
|
case TW_SR_DATA_NACK: // data received, returned nack
|
|
case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack
|
|
// nack back at master
|
|
twi_reply(0);
|
|
break;
|
|
|
|
// Slave Transmitter
|
|
case TW_ST_SLA_ACK: // addressed, returned ack
|
|
case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack
|
|
// enter slave transmitter mode
|
|
twi_state = TWI_STX;
|
|
// ready the tx buffer index for iteration
|
|
twi_txBufferIndex = 0;
|
|
// set tx buffer length to be zero, to verify if user changes it
|
|
twi_txBufferLength = 0;
|
|
// request for txBuffer to be filled and length to be set
|
|
// note: user must call twi_transmit(bytes, length) to do this
|
|
twi_onSlaveTransmit();
|
|
// if they didn't change buffer & length, initialize it
|
|
if(0 == twi_txBufferLength){
|
|
twi_txBufferLength = 1;
|
|
twi_txBuffer[0] = 0x00;
|
|
}
|
|
// transmit first byte from buffer, fall
|
|
case TW_ST_DATA_ACK: // byte sent, ack returned
|
|
// copy data to output register
|
|
TWDR = twi_txBuffer[twi_txBufferIndex++];
|
|
// if there is more to send, ack, otherwise nack
|
|
if(twi_txBufferIndex < twi_txBufferLength){
|
|
twi_reply(1);
|
|
}else{
|
|
twi_reply(0);
|
|
}
|
|
break;
|
|
case TW_ST_DATA_NACK: // received nack, we are done
|
|
case TW_ST_LAST_DATA: // received ack, but we are done already!
|
|
// ack future responses
|
|
twi_reply(1);
|
|
// leave slave receiver state
|
|
twi_state = TWI_READY;
|
|
break;
|
|
|
|
// All
|
|
case TW_NO_INFO: // no state information
|
|
break;
|
|
case TW_BUS_ERROR: // bus error, illegal stop/start
|
|
twi_error = TW_BUS_ERROR;
|
|
twi_stop();
|
|
break;
|
|
}
|
|
}
|
|
|