osd-contiki/examples/jn516x/tsch/uart1-test-node/uart1-test-node.c
2016-01-05 10:44:13 +01:00

258 lines
8.9 KiB
C

/*
* Copyright (c) 2015 NXP B.V.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of NXP B.V. nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY NXP B.V. AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NXP B.V. OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* Author: Theo van Daele <theo.van.daele@nxp.com>
*
*/
#include "net/ip/uip.h"
#include "net/linkaddr.h"
#include "rpl-tools.h"
#include "rest-engine.h"
#include "sys/ctimer.h"
#include "dev/uart-driver.h"
#include "uart1.h"
#include <AppHardwareApi.h>
static void get_coap_rx_uart1_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void event_coap_rx_uart1_handler(void);
static void put_post_tx_uart1_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void string2uart1(uint8_t *c);
static int handleRxChar(uint8_t c);
static int get_ringbuf(uint8_t *c);
static int put_ringbuf(uint8_t c);
/* COAP helpers */
static char content[REST_MAX_CHUNK_SIZE];
static int content_len = 0;
#define CONTENT_PRINTF(...) { if(content_len < sizeof(content)) content_len += snprintf(content+content_len, sizeof(content)-content_len, __VA_ARGS__); }
/* Ringbuf: written to by uart isr. Size must be power of 2 */
#define RINGBUF_SIZE 32
#define RINGBUF_MAX_INDEX (RINGBUF_SIZE-1)
static char ringbuf[RINGBUF_SIZE];
static int head_index = 1; /* index to write next data */
static int tail_index = 0; /* index where last read took place */
/* String aligned buffer */
#define RX_BUFFER_SIZE RINGBUF_SIZE
static uint8_t rx_buf[RX_BUFFER_SIZE+1];
static uint8_t rx_buf_index = 0; /* index for rx_buf */
/*---------------------------------------------------------------------------*/
PROCESS(start_app, "START_APP");
PROCESS(rx_data_process, "RX_DATA");
AUTOSTART_PROCESSES(&start_app, &rx_data_process);
/*---------------------------------------------------------------------------*/
/*********** COAP resources *************************************************/
/*****************************************************************************/
/* Observable resource and event handler to obtain terminal input from UART1 */
/*****************************************************************************/
EVENT_RESOURCE(resource_coap_rx_uart1, /* name */
"obs;title=\"rx_uart1\"", /* attributes */
get_coap_rx_uart1_handler, /* GET handler */
NULL, /* POST handler */
NULL, /* PUT handler */
NULL, /* DELETE handler */
event_coap_rx_uart1_handler); /* event handler */
static void
get_coap_rx_uart1_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
content_len = 0;
CONTENT_PRINTF("%s", rx_buf);
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
REST.set_response_payload(response, (uint8_t *)content, content_len);
}
}
static void
event_coap_rx_uart1_handler(void)
{
/* Registered observers are notified and will trigger the GET handler to create the response. */
REST.notify_subscribers(&resource_coap_rx_uart1);
}
/*****************************************************************************/
/* GET/PUT resource to send data to terminal on UART1 */
/*****************************************************************************/
RESOURCE(resource_coap_tx_uart1, /* name */
"obs;title=\"tx_uart1\"", /* attributes */
NULL, /* GET handler */
put_post_tx_uart1_handler, /* POST handler */
put_post_tx_uart1_handler, /* PUT handler */
NULL); /* DELETE handler */
static void
put_post_tx_uart1_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
const uint8_t *request_content = NULL;
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.get_request_payload(request, &request_content);
string2uart1((uint8_t *)request_content);
}
}
/*********** End COAP resources *********************************************/
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(start_app, ev, data)
{
PROCESS_BEGIN();
static int is_coordinator = 0;
memset(rx_buf, '\0', sizeof(rx_buf));
/* Define process that handles data */
process_start(&rx_data_process ,NULL);
/* Initialise UART1 */
uart1_init(UART1_BAUD_RATE);
/* Callback received byte */
uart1_set_input(handleRxChar);
/* Start network stack */
if(is_coordinator) {
uip_ipaddr_t prefix;
uip_ip6addr(&prefix, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
rpl_tools_init(&prefix);
} else {
rpl_tools_init(NULL);
}
printf("Starting RPL node\n");
rest_init_engine();
rest_activate_resource(&resource_coap_rx_uart1, "UART1-RX");
rest_activate_resource(&resource_coap_tx_uart1, "UART1-TX");
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(rx_data_process, ev, data)
{
PROCESS_BEGIN();
/* Process is polled whenever data is available from uart isr */
uint8_t c;
while(1) {
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
/* Read RX ringbuffer. ASCII chars Output when LF is seen.
If overflowed, strings are skipped */
do {
if (get_ringbuf(&c) == -1) {
break; /* No more rx char's in ringbuffer */
} else {
if (rx_buf_index == RX_BUFFER_SIZE) { /* Skip current content if buffer full */
rx_buf_index = 0;
}
rx_buf[rx_buf_index++] = c;
if ((c == '\n')||(c == '\r')) {
rx_buf[rx_buf_index] = '\0';
printf("RX on UART1: %s", rx_buf);
/* Signal event to coap clients.
Demo assumes data is consumed before new data comes in */
event_coap_rx_uart1_handler();
rx_buf_index = 0;
}
}
} while (1);
}
PROCESS_END();
}
/*************************************************************************/
/* Local test functions */
/*************************************************************************/
/* TX function for UART1 */
static void
string2uart1(uint8_t *c)
{
while (*c!= '\0') {
uart1_writeb(*c);
c++;
}
}
/* handleRxChar runs on uart isr */
static int
handleRxChar(uint8_t c)
{
if (put_ringbuf(c) == -1) {
printf("Ringbuf full. Skip char\n");
} else {
/* Send event to rx data handler */
process_poll(&rx_data_process);
}
return 0;
}
/* Simple ringbuffer
if tail==head, no data has been written yet on that position. So, empty buffer
is also initial state */
static int
get_ringbuf(uint8_t *c)
{
int return_val = 0;
uart1_disable_interrupts();
if (head_index != ((tail_index + 1)&RINGBUF_MAX_INDEX)) {
tail_index = ((tail_index + 1)& RINGBUF_MAX_INDEX);
*c = ringbuf[tail_index];
} else {
return_val = -1;
}
uart1_enable_interrupts();
return return_val;
}
static int
put_ringbuf(uint8_t c)
{
int return_val = 0;
uart1_disable_interrupts();
if (head_index != tail_index) {
ringbuf[head_index] = c;
head_index = ((head_index+1)&RINGBUF_MAX_INDEX);
} else {
return_val = -1;
}
uart1_enable_interrupts();
return return_val;
}