osd-contiki

History

George Oikonomou 2f89f41b5a cc2x3x RPL/non-RPL handling: - Relevant examples explicitly request it in their Makefile - Removed the definition of UIP_CONF_IPV6_RPL from contiki-conf.h. If needed, it's defined through a -D		2012-05-16 15:22:31 +01:00
..
border-router.c	We can now use SDCC's __nonbanked feature	2012-04-26 15:28:43 +01:00
Makefile	cc2x3x RPL/non-RPL handling:	2012-05-16 15:22:31 +01:00
project-conf.h	Reincarnate the sensinode/cc2430 port	2012-03-23 14:41:07 +00:00
README	Reincarnate the sensinode/cc2430 port	2012-03-23 14:41:07 +00:00
slip-bridge.c	Reincarnate the sensinode/cc2430 port	2012-03-23 14:41:07 +00:00

README

border-router example for sensinode devices.

This example is meant to be used with tunslip6 in tools/

- Build the code and load it onto your node
- Connect your node to your PC over USB
- run:
  sudo ./tunslip6 <address v6>/<prefix>
  
  This will setup tun0 on your PC over device /dev/ttyUSBx. The address
  argument should contain the v6 address that you want to assign to tun0
  The node will use this address to obtain the network prefix
  
  for example:
  sudo ./tunslip6 aaaa::1/64
  This will use aaaa:: / 64 as the prefix for the 15.4 network.