osd-contiki/examples/sensinode/cc2431-location-engine/cc2431_loc_eng.h
2012-03-23 14:41:07 +00:00

108 lines
4 KiB
C

/*
* Copyright (c) 2010, Loughborough University - Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Header file used by the example demonstrating the cc2431 location
* engine.
*
* This file contains declarations of the location engine registers and
* the LOCENG register bits. It also contains some data structures used
* to store calculation parameters and reference node coordinates.
*
* This file only needs to be included bye the blind node code file.
*
* More information on the cc2431 Location Engine can be found in:
* - cc2431 Datasheet
* - K. Aamodt, "CC2431 Location Engine", Texas Instruments Application
* Note 42.
*
* \author
* George Oikonomou - <oikonomou@users.sourceforge.net>
*/
#include "8051def.h"
#include <lint.h> /* For syntax parsers */
/* Location Engine Registers on the cc2431 */
__xdata __at (0xDF55) unsigned char REFCOORD;
__xdata __at (0xDF56) unsigned char MEASPARM;
__xdata __at (0xDF57) unsigned char LOCENG;
__xdata __at (0xDF58) unsigned char LOCX;
__xdata __at (0xDF59) unsigned char LOCY;
/* LOCENG Register Bits */
#define LOCENG_RUN 0x01
#define LOCENG_REFLD 0x02
#define LOCENG_PARLD 0x04
#define LOCENG_DONE 0x08
#define LOCENG_EN 0x10
/* cc2431 chips report 0x89 when the CHIPID register is read */
#define CC2431_CHIP_ID 0x89
/*
* Struct for the Calculation Parameters.
* Values stored here feed the MEASPARM register.
*
* Values should be stored here in Location Engine format:
* RSSI: 0.5 Precision, without the minus sign. All 16 must be used. Use 0
* to reduce the number of ref. nodes used in the calculation.
* Value range [-95 dBm , -40 dBm]
* A: 0.5 Precision. Value range [30.0 , 50.0] (Thus [60 , 100] decimal)
* n: Use the n Index value [0 , 31] - See cc2431 datasheet, Table 2.
* delta: Must be present. If we want the calculation to be unrestricted,
* use 0xFF
*
*/
struct meas_params {
uint8_t alpha;
uint8_t n;
uint8_t x_min;
uint8_t x_delta;
uint8_t y_min;
uint8_t y_delta;
uint8_t rssi[16];
};
/*
* Store the reference node coordinates here.
* This will feed REFCOORD.
*
* Values should be stored here in Location Engine format:
* 2 LS bits for the fractional part, 0.25 precision
* 6 MS bits for the integral part.
* Value range [0 , 63.75] (thus [0 , 255])
*/
struct refcoords {
uint8_t x;
uint8_t y;
};