osd-contiki/cpu/avr/dev/i2c.c
Ralf Schlatterbeck 04bbba6c12 Multi-platform support, osd-merkur-{128,256}
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is
now osd-merkur-128. Also check that everything is consistent.
Add both platforms to the regression tests.
Move redundant files in platform dev directory of both platforms to
cpu/avr/dev. Note that this probably needs some rework. Already
discovered some inconsistency in io definitions of both devices in the
avr/io.h includes. Added a workaround in the obvious cases.
The platform makefiles now set correct parameters for bootloader and for
reading mac-address from flash memory.
Factor the flash programming into cpu/avr and platform/osd-merkur* and
rework *all* osd example makefiles to use the new settings. Also update
all the flash.sh and run.sh to use the new settings.
The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:59:40 +02:00

392 lines
8.9 KiB
C

/*
* Copyright (c) 2014, Ingo Gulyas Intembsys
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* I2C driver for ATMEGA128rfa1
*
* \author
* Ingo Gulyas Intembsys
* office@intembsys.at
* www.intembsys.at
*/
#include "i2c.h"
#include "contiki-conf.h"
#include <stdint.h>
#include <avr/power.h>
#include <stdbool.h>
#include <stddef.h>
#if I2C_TD != 0
#include <stdio.h>
#include <avr/pgmspace.h>
#include "system_mgmt.h"
#define PRINTD(FORMAT,args...) {sleep_acquire_lock(); printf_P(PSTR(FORMAT),##args); sleep_release_lock();}
#else
#define PRINTD(...)
#endif
#if WITH_RTDEBUG == 1
#include "rtdebug.h"
#define RTDEBUG_PUSH(x) rtdebug_push(x)
#else
#warning "I2C Driver compiling without RTDEBUG!"
#define RTDEBUG_PUSH(x)
#endif
#ifndef TIMEOUT_TIMER
#warning "I2C Driver compiling without TIMEOUT!"
#endif
static int8_t wait_job();
static int8_t wait_stop();
static int8_t i2c_ioctl(const i2c_driver* const me, uint8_t cmd, uint8_t arg);
static int8_t i2c_read(const i2c_driver* const me, uint8_t cmd_flags, uint8_t* buffer, uint8_t len);
static int8_t i2c_write(const i2c_driver* const me, uint8_t cmd_flags, const uint8_t* data, uint8_t len);
// static linkage of member functions
i2c_driver i2c_drv = {i2c_ioctl, i2c_read, i2c_write};
// lock spi if driver opened to prevent further opening access
static volatile bool i2c_lock = false;
///////////////////////////////////////////////////////////////
// global functions
///////////////////////////////////////////////////////////////
i2c_driver* i2c_open(void)
{
if(i2c_lock == true)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_OPEN__DEVICE_BUSY);
return NULL;
}
i2c_lock = true;
power_twi_enable();
I2C_INIT();
TWBR = I2C_FREQ_STANDARD;
TWSR &= ~((1<<TWPS1) | (1<<TWPS0));
TWSR |= (1<<TWPS0);
TWCR = (1<<TWEN);
return &i2c_drv;
}
void i2c_close(i2c_driver* const me)
{
if(me == NULL || i2c_lock == false)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_CLOSE__NO_DEVICE);
return;
}
i2c_reset();
return;
}
void i2c_reset(void)
{
TWCR &= ~(1<<TWEN);
I2C_DEINIT();
power_twi_disable();
i2c_lock = false;
return;
}
///////////////////////////////////////////////////////////////
// local helper functions
///////////////////////////////////////////////////////////////
#ifdef TIMEOUT_TIMER
static int8_t wait_job()
{
int8_t status = I2C_OK;
uint16_t timeout = TIMEOUT_TIMER_NOW_ADD(I2C_TIMEOUT);
while (!(TWCR & (1<<TWINT)))
{
if(!(TIMEOUT_TIMER_LT(TIMEOUT_TIMER_NOW(), timeout)))
{
status = I2C_ERROR_TIMEOUT;
break;
}
}
return status;
}
static int8_t wait_stop()
{
int8_t status = I2C_OK;
uint16_t timeout = TIMEOUT_TIMER_NOW_ADD(I2C_TIMEOUT);
while (TWCR & (1<<TWSTO))
{
if(!(TIMEOUT_TIMER_LT(TIMEOUT_TIMER_NOW(), timeout)))
{
status = I2C_ERROR_TIMEOUT;
break;
}
}
return status;
}
#else
static int8_t wait_job()
{
while (!(TWCR & (1<<TWINT)));
return I2C_OK;
}
static int8_t wait_stop()
{
while (TWCR & (1<<TWSTO));
return I2C_OK;
}
#endif
///////////////////////////////////////////////////////////////
// member functions
///////////////////////////////////////////////////////////////
static int8_t i2c_ioctl(const i2c_driver* const me, uint8_t cmd, uint8_t arg)
{
if(me == NULL || i2c_lock == false)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_IOCTL__DEVICE_CLOSED);
return I2C_ERROR_DRIVER;
}
if(cmd == I2C_IOCTL_CMD_SET_FREQ)
{
switch(arg)
{
case I2C_FREQ_400KHZ: TWBR = I2C_FREQ_400KHZ; break;
case I2C_FREQ_250KHZ: TWBR = I2C_FREQ_250KHZ; break;
case I2C_FREQ_100KHZ: TWBR = I2C_FREQ_100KHZ; break;
case I2C_FREQ_50KHZ: TWBR = I2C_FREQ_50KHZ; break;
case I2C_FREQ_10KHZ: TWBR = I2C_FREQ_10KHZ; break;
default:
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_IOCTL__ARG_INVALID);
return I2C_ERROR_DRIVER;
}
}
}
else
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_IOCTL__CMD_INVALID);
return I2C_ERROR_DRIVER;
}
return I2C_OK;
}
static int8_t i2c_read(const i2c_driver* const me, uint8_t cmd_flags, uint8_t* buffer, uint8_t len)
{
uint8_t i = 0;
int8_t status = I2C_OK;
if(me == NULL || i2c_lock == false)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__DEVICE_CLOSED);
return I2C_ERROR_DRIVER;
}
if((len > 0) && (buffer == NULL))
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__ERROR_NULLPOINTER);
return I2C_ERROR_DRIVER;
}
do
{
if(cmd_flags & I2C_CMD_FLAG_START)
{
I2C_START();
if(wait_job() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__START_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
break;
}
if((I2C_STATUS() != I2C_STATUS_START) && (I2C_STATUS() != I2C_STATUS_START_REP))
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__START_ERROR);
status = I2C_ERROR_START;
break;
}
PRINTD("I2C-RD-START\n");
}
if(len == 0) break;
for(i=0; i<(len-1); i++)
{
I2C_READ_BYTE_ACK();
if(wait_job() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__READ_BYTE_ACK_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
break;
}
if(I2C_STATUS() != I2C_STATUS_DATAR_ACK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__READ_BYTE_ACK_ERROR);
status = I2C_ERROR_READ;
break;
}
buffer[i] = I2C_RX_REG;
PRINTD("I2C-RD-RACK: 0x%02X\n", buffer[i]);
}
I2C_READ_BYTE_NACK();
if(wait_job() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__READ_BYTE_NACK_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
break;
}
if(I2C_STATUS() != I2C_STATUS_DATAR_NACK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__READ_BYTE_NACK_ERROR);
status = I2C_ERROR_READ;
break;
}
buffer[i] = I2C_RX_REG;
PRINTD("I2C-RD-RNACK: 0x%02X\n", buffer[i]);
} while (0);
if(cmd_flags & I2C_CMD_FLAG_STOP)
{
I2C_STOP();
if(wait_stop() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_READ__STOP_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
}
PRINTD("I2C-RD_STOP\n");
}
return status;
}
static int8_t i2c_write(const i2c_driver* const me, uint8_t cmd_flags, const uint8_t* data, uint8_t len)
{
uint8_t i = 0;
int8_t status = I2C_OK;
if(me == NULL || i2c_lock == false)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__DEVICE_CLOSED);
return I2C_ERROR_DRIVER;
}
if((len > 0) && (data == NULL))
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__ERROR_NULLPOINTER);
return I2C_ERROR_DRIVER;
}
do
{
if(cmd_flags & I2C_CMD_FLAG_START)
{
I2C_START();
if(wait_job() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__START_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
break;
}
if((I2C_STATUS() != I2C_STATUS_START) && (I2C_STATUS() != I2C_STATUS_START_REP))
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__START_ERROR);
status = I2C_ERROR_START;
break;
}
PRINTD("I2C-WR-START\n");
}
for(i=0; i<len; i++)
{
I2C_TX_REG = data[i];
I2C_WRITE_BYTE();
if(wait_job() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__WRITE_BYTE_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
break;
}
if((I2C_STATUS() != I2C_STATUS_DATAW_ACK) && (I2C_STATUS() != I2C_STATUS_SLAW_ACK) && (I2C_STATUS() != I2C_STATUS_SLAR_ACK))
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__WRITE_BYTE_ERROR);
status = I2C_ERROR_WRITE;
break;
}
PRINTD("I2C-WR-BYTE: 0x%02X\n", data[i]);
}
} while (0);
if(cmd_flags & I2C_CMD_FLAG_STOP)
{
I2C_STOP();
if(wait_stop() != I2C_OK)
{
RTDEBUG_PUSH(RTDEBUG_CODE__I2C_WRITE__STOP_TIMEOUT);
status = I2C_ERROR_TIMEOUT;
}
PRINTD("I2C-WR-STOP\n");
}
return status;
}