osd-contiki/examples/mb851/shell-exec
2012-10-26 15:54:49 +02:00
..
hello-world.c Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
Makefile Added example for the elfloader on the MB851 platform, taken from sky-shell-exec example. 2010-12-15 15:33:30 +00:00
README.txt Added example for the elfloader on the MB851 platform, taken from sky-shell-exec example. 2010-12-15 15:33:30 +00:00
shell-exec-test.c Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00

ELFloader and shell command 'exec' example for MB851 (STM32W) platform
-----------------------------------------------------------

Compiles the Contiki hello-world application as a Contiki executable (.ce).
The Contiki executable is then uploaded to the MB851 platform via serial, and
is stored in the filesystem.
Finally, the executable is loaded via the shell command 'exec'.
 
NOTE:
You may have to reduce the ELF loader memory usage (/platform/sky/contiki-conf.h).
Since hello-world uses very little memory:
#define ELFLOADER_CONF_DATAMEMORY_SIZE 0x100
#define ELFLOADER_CONF_TEXTMEMORY_SIZE 0x100


1. Upload Sky shell with 'exec' command and symbols (requires several recompilations to generate correct symbols):
> make
> make CORE=shell-exec-test.mb851
> make shell-exec-test.flash CORE=shell-exec-test.mb851 PORT=AUTO


2. Verify access to the shell and the filesystem:
> make login DEV=/dev/comX
SHELL> echo hello shell
SHELL> echo test | write mytest.txt
SHELL> ls
SHELL> read mytest.txt
[CTRL-C] to exit the shell


3. Upload Contiki executable hello-world.ce:
> make upload-executable DEV=/dev/comX
[CTRL-C] to exit the shell when the entire file has been uploaded (after ~30 sec)


4. Verify that hello-world.ce exists in CFS:
> make login DEV=/dev/comX
SHELL> ls
SHELL> read hello-world.ce | size
The last command output should equal the size of hello-world.ce in this directory!


5. Load and start hello world:
SHELL> exec hello-world.ce
The program should now start: the output 'Hello, World' appears.