osd-contiki/examples/cc26xx
Jonas Olsson bad7eb2bc8 Add a very sleepy CC26xx/CC13xx demo
This demonstraties how to combine CC13xx tick suppression, RPL leaf mode and turning off ContikiMAC duty cycling to build an extremely low-consuming firmware.
2015-08-23 20:41:12 +01:00
..
cc26xx-web-demo Modify cc26xx examples to play nicely with the CC13xx addition 2015-08-23 20:41:11 +01:00
very-sleepy-demo Add a very sleepy CC26xx/CC13xx demo 2015-08-23 20:41:12 +01:00
cc26xx-demo.c Modify cc26xx examples to play nicely with the CC13xx addition 2015-08-23 20:41:11 +01:00
Makefile Add CC26xx examples 2015-02-25 13:15:35 +01:00
Makefile.target Add CC26xx examples 2015-02-25 13:15:35 +01:00
project-conf.h Modify cc26xx examples to play nicely with the CC13xx addition 2015-08-23 20:41:11 +01:00
README.md Modify cc26xx examples to play nicely with the CC13xx addition 2015-08-23 20:41:11 +01:00

CC26xx Demo

This example demonstrates basic functionality for the two supported CC26xx boards. More specifically, the example demonstrates:

  • How to take sensor readings
  • How to use buttons and the reed relay (triggered by holding a magnet near S3 on the SensorTag).
  • How to send out BLE advertisements, if the chip has BLE capability. The device will periodically send out BLE beacons with the platform name as payload. Those beacons/BLE ADV packets can be captured with any BLE-capable device. Two such applications for iOS are the TI Multitool and the TI Sensortag app. They can be found in the Apple App Store. If you have a BLE-capable Mac, you can also use LightBlue for OS X.