osd-contiki/platform/avr-ravenusb/contiki-conf.h
2010-02-18 17:24:12 +00:00

177 lines
5.3 KiB
C

/*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$$
*/
/**
* \file
* Configuration for sample STK 501 Contiki kernel
*
* \author
* Simon Barner <barner@in.tum.de
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#include <stdint.h>
typedef int32_t s32_t;
/*
* MCU and clock rate
*/
#define MCU_MHZ 8
#define PLATFORM PLATFORM_AVR
#define RAVEN_REVISION RAVENUSB_C
/* Cock ticks per second */
#define CLOCK_CONF_SECOND 125
/* Maximum time interval (used for timers) */
#define INFINITE_TIME 0xffff
/* COM port to be used for SLIP connection */
#define SLIP_PORT RS232_PORT_0
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
#define MMEM_CONF_SIZE 256
/* Use the following address for code received via the codeprop
* facility
*/
#define EEPROMFS_ADDR_CODEPROP 0x8000
/* Use Atmel 'Route Under MAC', currently just in sniffer mode! */
//#define UIP_CONF_USE_RUM 1
#define CCIF
#define CLIF
#define RIMEADDR_CONF_SIZE 8
/* 0 for IPv6, or 1 for HC1, 2 for HC01 */
#define SICSLOWPAN_CONF_COMPRESSION_IPV6 0
#define SICSLOWPAN_CONF_COMPRESSION_HC1 1
#define SICSLOWPAN_CONF_COMPRESSION_HC01 2
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_CONF_COMPRESSION_HC01
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 3
#define UIP_CONF_LL_802154 1
#define UIP_CONF_LLH_LEN 14
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 4
#define UIP_CONF_IP_FORWARD 0
#define UIP_CONF_FWCACHE_SIZE 0
#define UIP_CONF_IPV6 1
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_QUEUE_PKT 0
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_TCP 1
#define UIP_CONF_TCP_SPLIT 1
#define UIP_CONF_STATISTICS 1
#ifdef RF230BB
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //for barebones driver, sicslowpan calls radio->read function
//#undef PACKETBUT_CONF_HDR_SIZE //RF230BB takes the packetbuf default for header size
#endif
/* Fragmentation uses queuebuf.c to save packets */
#define QUEUEBUF_CONF_NUM 1
#define QUEUEBUF_CONF_REF_NUM 1
/* Route-Under-MAC uses 16-bit short addresses */
#if UIP_CONF_USE_RUM
#undef UIP_CONF_LL_802154
#define UIP_DATA_RUM_OFFSET 5
#endif
#if RF230BB && 0 //xmac protocol
#undef UIP_CONF_ROUTER
#undef UIP_CONF_LLH_LEN
#define UIP_CONF_LLH_LEN 14
#undef XMAC_CONF_COMPOWER
#define XMAC_CONF_COMPOWER 1
#undef XMAC_CONF_ANNOUNCEMENTS
#define XMAC_CONF_ANNOUNCEMENTS 0
#undef RF_CHANNEL
#define RF_CHANNEL 26
//#define CC2420_CONF_AUTOACK 0
#undef UIP_CONF_BUFFER_SIZE
#define UIP_CONF_BUFFER_SIZE 256
#endif
#if RF230BB && 0
/* Specifies the default MAC driver */
//no autoack gives bad FCS for some reason?
//#define RF230_CONF_NO_AUTO_ACK 1
#define MAC_CONF_CSMA 1
#define XMAC_CONF_COMPOWER 1
#define CXMAC_CONF_COMPOWER 1
//following gives 50% duty cycle, undef for 5%
#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 16)
#define MAC_CONF_DRIVER cxmac_driver
#define MAC_CONF_CHANNEL_CHECK_RATE 8
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
#define CXMAC_CONF_ANNOUNCEMENTS 0
#define XMAC_CONF_ANNOUNCEMENTS 0
#endif
typedef unsigned short clock_time_t;
typedef unsigned char u8_t;
typedef unsigned short u16_t;
typedef unsigned long u32_t;
typedef unsigned short uip_stats_t;
typedef unsigned long off_t;
void clock_delay(unsigned int us2);
void clock_wait(int ms10);
void clock_set_seconds(unsigned long s);
unsigned long clock_seconds(void);
#endif /* __CONTIKI_CONF_H__ */