62 lines
1.8 KiB
Makefile
62 lines
1.8 KiB
Makefile
CONTIKI_TARGET_DIRS = . rf230 apps net loader
|
|
CONTIKI_CORE=contiki-raven-main
|
|
CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o
|
|
|
|
#USB Ethernet Interface + USB Serial Port TX Only
|
|
USB = uart_usb_lib.c \
|
|
cdc_task.c \
|
|
rndis_task.c \
|
|
rndis.c \
|
|
usb_descriptors.c \
|
|
usb_drv.c \
|
|
usb_specific_request.c \
|
|
usb_standard_request.c \
|
|
usb_task.c \
|
|
scsi_decoder.c \
|
|
ctrl_access.c \
|
|
storage_task.c \
|
|
avr_flash.c
|
|
|
|
CONTIKI_TARGET_SOURCEFILES += cfs-eeprom.c eeprom.c random.c \
|
|
mmem.c contiki-raven-default-init-lowlevel.c \
|
|
contiki-raven-default-init-net.c contiki-raven-main.c \
|
|
sicslow_ethernet.c \
|
|
$(USB)
|
|
|
|
USB_INCLUDES = -I$(CONTIKI_CPU)/dev/usb
|
|
|
|
CONTIKIAVR=$(CONTIKI)/cpu/avr
|
|
CONTIKIBOARD=.
|
|
|
|
CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAVRGCC -DAUTO_CRC_PADDING=2 -DJACKDAW=1
|
|
|
|
|
|
MCU=at90usb1287
|
|
AVRDUDE_PROGRAMMER=jtag2
|
|
|
|
# For usb devices, you may either use PORT=usb, or (e.g. if you have more than one
|
|
# programmer connected) you can use the following trick to find out the serial number:
|
|
#
|
|
# The example is for an JTAGICE mkII used to program an ATmega128:
|
|
# avrdude -v -P usb:xxxx -c jtag2 -p atmega128
|
|
AVRDUDE_PORT=usb:00B000000D79
|
|
|
|
|
|
|
|
# Additional avrdude options
|
|
# Verify off
|
|
AVRDUDE_OPTIONS=-V
|
|
|
|
|
|
include $(CONTIKIAVR)/Makefile.avr
|
|
|
|
# Source for AT86RF230
|
|
include $(CONTIKI)/cpu/avr/radio/rf230/Makefile.rf230
|
|
|
|
# Source for Atmel/Cisco 802.15.4'ish MAC
|
|
include $(CONTIKI)/cpu/avr/radio/mac/Makefile.mac
|
|
|
|
# Source for IEEE 802.15.4 manager interface
|
|
include $(CONTIKI)/cpu/avr/radio/ieee-manager/Makefile.ieee-manager
|
|
|